Sattar Larik

Prof. Dr. Sattar Larik


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 July 2023 in Energies
Verified
Journal Article
Open access
PDF file
AMAbdul Jabbar Memon
Abdul Jabbar Memon
MMMukhtiar Ahmed Mahar
Mukhtiar Ahmed Mahar
SLSattar Larik
Sattar Larik
MSMuhammad Mujtaba Shaikh
Muhammad Mujtaba Shaikh
This article presents a comprehensive review of reduced device count multilevel inverter (RDC MLI) topologies for PV systems. Multilevel inverters are widely used in medium-voltage and high-power applications such as wireless power transform applications, flexible AC transmission (FACT), active filters, AC motor drives, high-voltage DC transmission (HVDC), and renewable energy sources due to their high modularity and high-power quality output. Multilevel inverters have the ability to diminish the harmonics content in the output voltage by applying various modulation techniques. The literature in this field showed that the high-power quality and high modularity of the output demand an undeniable need for multilevel inverter topology. Research in this field has identified various multilevel inverter topologies, each possessing their own merits and demerits. The ubiquitous availability of multilevel inverter topologies illustrates the complexity of their accurate selection. To avoid such complexity, this review shows the state of the art of various reduced device count (RDC) multilevel inverter (MLI) topologies. Details of the various RDC MLIs, along with their comparisons, are provided in this paper. This review will be an important reference tool for future work on RDC MLI for photovoltaic (PV) systems.

7 November 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
ASAbdul Hameed Soomro
Abdul Hameed Soomro
SLSattar Larik
Sattar Larik
MMMukhtiar Ahmed Mahar
Mukhtiar Ahmed Mahar
ASAnwar Ali Sahito
Anwar Ali Sahito
A constant power supply is a basic need for each consumer due to the increase in sensitive equipment day by day. As per IEEE standards, a 10% reduction in voltage from the supply voltage is not acceptable and may cause the failure of equipment. Previously, different techniques have been used to alleviate the voltage sag, such as STATCOM, DSTATCOM, SVC, and shunt capacitors, but these devices are connected in parallel, which compensates for the low value of voltage sag, and they have high maintenance costs involved. Compensation for the low and high values of voltage sag is possible through a series-connected device such as a dynamic voltage restorer. In this paper, a matrix converter is presented for DVR to convert AC to AC voltage directly and free from batteries, capacitors, and multiple conversions as needed in a voltage source inverter, resulting in a reduced cost of DVR topology. The DVR is meaningless in the absence of a controller, so it is necessary to select a suitable controller for the satisfactory operation of the DVR under a variation of system parameters. In this paper, the performance of a linear PID controller is analyzed and compared with a nonlinear controller, such as a sliding-mode controller, under variation of power system parameters inorder to select a robust controller that performs satisfactorily for DVR. Earlier trial-and-error methods were used to obtain the parameters of PID gains, but they require a large time to obtain the parameters of the PID gains and there is a chance of inaccuracy. A genetic algorithm was used to obtain the gain parameters, but it has more convergence time and the particle swarm optimization technique has involves less reliability. In this research paper, the sliding surface coefficient parameters such as and Ki for the PI sliding surface of SMC and PID gains are taken through an ant colony algorithm to obtain the robustness of the controllers. The purpose of this paper is to introduce the best DVR topology with reduced cost. MATLAB simulation software was utilized to analyze the performance of the DVR with PID and SMC controllers under different fault conditions and also the THD% of proposed controllers was analyzed through FFT.

5 July 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
RMRabail Memon
Rabail Memon
MMMukhtiar Ahmed Mahar
Mukhtiar Ahmed Mahar
SLSattar Larik
Sattar Larik
SSSyed Asif Ali Shah
Syed Asif Ali Shah
Multilevel inverters (MLIs) have recently attracted more attention in medium-voltage and high-power applications as they can provide an effective interface with photovoltaic (PV) systems. Conventional MLIs are used to generate higher voltage levels, which improve power quality and reduce the requirement for passive filters. However, recent research has focused on designing new MLI topologies using reduced switch counts and less voltage stress. This study, as such, proposes a new nine-level symmetric MLI for PV systems with a minimum number of switches. This decrease in the number of switches reduces the voltage stress across the switches and the number of driving circuits, which lowers the complexity of the control circuit and, as a result, lowers the cost and size of the system. This article compares the proposed MLI with other topologies based on the DC sources, switches count, gate driver circuits (Ngd), total standing voltage per unit (TSVPU), cost function (CF), and components count per level (CC/L). The proposed topology is integrated with the PV system. MATLAB software is used to evaluate the performance of MLI at step change in irradiance and under variable load conditions. The total harmonic distortion (THD) of the proposed topology is reduced with the implementation of phase disposition pulse width modulation (PD-PWM). In addition, PD-PWM is compared with phase opposition disposition pulse width modulation (POD-PWM) and alternative phase opposition disposition pulse width (APOD-PWM) modulation techniques. The simulation results reveal the improved performance of the proposed topology at variable irradiance and under varying load conditions. The comparison results reveal minimum (TSVPU), CC/L, CF, and switch count compared to existing topologies. Hence, the proposed topology of MLI is cost-effective and superior in all aspects compared to other topologies. In summary, it offers overall improved performance, and thus, it is feasible for the PV system.

29 December 2025 in Sir Syed University Research Journal of Engineering & Technology
Verified
Journal Article
Open access
PDF file
SLSattar Larik
Sattar Larik
ASAbdul Hameed Soomro
Abdul Hameed Soomro
SBSaad Khan Baloch
Saad Khan Baloch
KZKhalil Muhammad Zuhaib
Khalil Muhammad Zuhaib
ILImtiaz Ali Laghari
Imtiaz Ali Laghari
A new design of three phase modified matrix converter based on use of fewer semiconductor switches has been introduced in this study with an aim of improving efficiency, simplify circuit architecture and reduced overall cost of implementation. Traditional direct matrix converters (DMCs) typically need 18 bidirectional switches and net result is complicated control programs and elevated losses of power. Reduced-switch topology conversion of AC to AC will save the DC intermediate link in the architecture and simplifies the architecture, offering higher reliability. With a low number of active components, the design is capable of less switching losses and complexity of hardware. The different converters proposed, standard voltage source inverters (VSIs), current source inverters (CSIs), and typical DMCs are thoroughly compared. The key performance indicator total harmonic distortion (THD), system efficiency, control complexity. Simulation results show that the new structure has the same level of performance as the current solutions but possesses all the major benefits of compactness and ease of management, which makes it applicable in motor drives, renewable systems, and other space-limited applications.

29 June 2025 in Sir Syed University Research Journal of Engineering & Technology
Verified
Journal Article
Open access
PDF file
ASAbdul Hameed Soomro
Abdul Hameed Soomro
ILImtiaz Ali Laghari
Imtiaz Ali Laghari
SSSyed Qurban Ali Shah
Syed Qurban Ali Shah
SLSattar Larik
Sattar Larik
SBSaad Khan Baloch
Saad Khan Baloch
The project establishes automatic day-to-night light control through the combination of Passive Infrared (PIR) sensors and Solid State Relays (SSR) devices. The program uses PIR sensors to sense human presence which causes the automatic lighting activation. Through its operation, the system deploys photo sensors which enable it to detect outdoor light conditions and subsequently deactivate the lights for energy conservation purposes. Moving humans inside the monitored space will activate the SSR through PIR sensor detection which will power up the light. The microcontroller handles the sensor data to decide whether to activate or stop the light operation. The system controls the lights through a logic that turns them off when daytime ambient light levels achieve certain thresholds. The power efficiency of the proposed system occurs due to its ability to activate illumination units only during required times. This design proves cost-effective to other solutions because it removes the requirement for a manual switch. The system which historically operated for residential purposes has undergone factory adaptation to save electricity for elderly persons at home and masons operating outside of factory premises. The automatic switch system represents an easy method for detecting daytime and nighttime conditions which can decrease energy usage within homes and businesses through its automated lighting capabilities