Transistor arrangement influences the performance of logic cells. Complex logic cells can be used to minimize area, delay, and power. However, with the increasing relevance of nanometer challenges such as process variability and radiation effects, it is also necessary to consider these factors at logic level design. The main contribution of this work is to evaluate the advantages of adopting a multi-level logic design instead of using complex gates to mitigate process variability and radiation effects. A justification for choosing the parameter that will characterize process variability is presented. Also, the analysis with different transistor arrangements and sizing is carried out to provide a basis for a better understanding of the obtained results. The experimental evaluation considers two topologies: complex gates and multi-level using basic gates, for a set of logic gates using the 7nm FinFET technology at the layout level. As expected, at nominal conditions, the best choice is to adopt complex gate topology to optimize area, power consumption, and performance. However, the logic multi-level arrangements became the functions up to 50% less sensitive to the transient faults and at least 30% more robust to the process variability effects. A trade-off needs to be done, considering the area and power constraints.
This work presents Quasar, an open-source tool developed to boost the characterization of how variability effects impact radiation sensitivity in digital circuits. Quasar receives a SPICE netlist as input and automatically determines robustness metrics, such as the critical Linear Energy Transfer, for every configuration in which a Single Event Transient fault can propagate an error. The tool can handle ranges from small basic cells to median multi-gate circuits in a few seconds, speeding up the traditional fault injection mechanism based on a large number of electrical simulations. The tool’s workflow explores logical masking to reduce the design space exploration, i.e., reducing the necessary number of electrical simulations, as well as regression methods to speed up variability evaluations. Quasar already has shown the potential to provide useful results, and a prototype has also been published. This work presents a more polished and complete version of the tool, one that optimizes the tool’s search process and allows not only for a fast evaluation of the radiation robustness of a circuit, but also for an analysis of how fabrication process metrics impact this robustness, such as Work Function Fluctuation.
13 September 2023 in IEEE Transactions on Circuits and Systems I: Regular Papers
This work details a new way to deal with the Multiple-Cell Upsets (MCU) in SRAM memories for space applications. The method consists of spatially interleaving a memory plan with a network of memory radiation detectors. As a proof-of-concept, a prototype circuit composed of the radiation detectors was manufactured in the 350 nm CMOS Process Technology and tested considering two methodologies: electrically-induced SEU/MCU testing and SEE laser testing. Silicon measurement results confirm the correct operation of the circuit, detecting single and multiple events inserted in different positions of the evaluated detection plans. According to the ratio between the number of data and detection cells, the method proposed can provide a probability of detecting MCUs in a memory plan that can reach close to 100%.