Mohammed A. Noman

Mr. Mohammed A. Noman

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2020 in IEEE Access
Verified
Journal Article
Open access
Husam KaidHusam Kaid
Husam Kaid
Abdulrahman Al-AhmariAbdulrahman Al-Ahmari
Abdulrahman Al-Ahmari
Emad Abouel NasrEmad Abouel Nasr
Emad Abouel Nasr
AAAdel Al-Shayea
Adel Al-Shayea
AKAli K. Kamrani
Ali K. Kamrani
HMHaitham Abbas Ahmed Mahmoud
Haitham Abbas Ahmed Mahmoud
Previously, different deadlock control strategies for automated manufacturing systems (AMSs) based on Petri Nets with reliable resources have been proposed. However, in real-world applications, resources may be unreliable. Therefore, deadlock control strategies presented in previous research studies are not suitable for such applications. To address this issue, this paper proposes a novel three-step deadlock control strategy for fault detection and treatment of unreliable resource systems. In the first step, a controlled system (deadlock-free) is obtained using the “Maximum Number of Forbidding First met Bad Markings Problem 1” (MFFBMP1), which does not consider resource failures. Subsequently, all obtained monitors are merged into a single monitor based on a colored Petri net. The second step addresses deadlocks caused by resource failures in the Petri net model using a common recovery subnet based on colored Petri nets. The recovery subnet is applied to the system obtained in the first step to ensure that the system is reliable. The third step proposes a hybrid approach that combines neural networks with colored Petri nets obtained from the second step, for the detection and treatment of faults. The proposed approach possesses the advantages of modular integration of Petri nets and can also learn neurons and reduce knowledge, similar to neural networks. Therefore, this approach solves the deadlock problem in AMSs and also detects and treats failures. The proposed approach was tested using an example from literature.

1 January 2020 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
AAAdel Alshayea
Adel Alshayea
Fawaz M. AbdullahFawaz M. Abdullah
Fawaz M. Abdullah
Mohammed A. NomanMohammed A. Noman
Mohammed A. Noman
Husam KaidHusam Kaid
Husam Kaid
Emad Abouel NasrEmad Abouel Nasr
Emad Abouel Nasr
The turning, which consists of the removal of metal from the outer diameter of a rotating cylindrical workpiece, is one of the most common techniques for cutting, especially when finishing the product. The values of the cutting parameters, such as feed rate, cutting speed, and depth of cut, in a turning operation must be selected carefully to improve the profit of operations by enhancing productivity and reducing the total manufacturing cost for each component. A high vibration leads to poor surface finish and reduced productivity and shortens the tool life; therefore, this parameter should be controlled. In this study, an experiment is conducted to investigate the effects of these cutting parameters in the turning process of a workpiece, composed of AISI 1040 steel, using the response surface method. Statistical tools were used to design the experiments. These parameters are optimized by using analysis of variance, regression, and optimization techniques to achieve the condition of minimum vibration and chip frequency, therefore improving the surface roughness after the turning process.

24 October 2023 in Symmetry
Verified
Journal Article
Open access
PDF file
Fahad M. AlqahtaniFahad M. Alqahtani
Fahad M. Alqahtani
Mohammed A. NomanMohammed A. Noman
Mohammed A. Noman
SASaad A. Alabdulkarim
Saad A. Alabdulkarim
IAIbarhim Alharkan
Ibarhim Alharkan
MAMohammed H. Alhaag
Mohammed H. Alhaag
FAFaisal M. Alessa
Faisal M. Alessa
Human errors (HEs) are common problems in manual assembly processes, impacting product quality and resulting in additional costs. Based on expert judgments, this study aims to identify the most significant factors affecting HEs in manual assembly processes and explore the cause-and-effect relationships among those factors. In order to achieve this objective, a proposed model is constructed using two types of Multi-Criteria Decision-Making (MCDM) techniques. Firstly, using two rounds of the fuzzy Delphi method (FDM), twenty-seven factors with an influence score of 0.7 or higher were found to have a major impact on HEs during manual assembly processes, with at least a 75% consensus among experts. After that, the twenty-seven factors affecting HEs were given to experts in a third round to analyze the cause-and-effect relationships among those factors using the fuzzy decision-making trial and evaluation laboratory (DEMATEL) method. In MCDM techniques, symmetry refers to an important property that can be used to find relationships between variables. It is based on the principle that the relative importance or preference between two variables should remain the same regardless of their positions or roles. Therefore, symmetry is a factor that MCDM approaches take into account to ensure that the relationships between variables are accurately represented, leading to more reliable decision-making outcomes. The reliability and normality of the surveying data were examined using the SPSS 22.0 software program. The study results revealed that training level, poor workplace layout, a lack of necessary tools, and experience were the major factors affecting HEs as root causes. Moreover, a failure to address the error-causing problem, unintentional unsafe acts, fatigue, and poor error visual perception were found to be effect (dependent) factors. The findings of this study can help organizations make better-informed decisions on how to reduce worker errors and interest in the factors that contribute to assembly errors and provide a good basis for reaching the quality of final assembled parts.

11 November 2024 in Systems
Verified
Journal Article
Open access
PDF file
Fahad M. AlqahtaniFahad M. Alqahtani
Fahad M. Alqahtani
Mohammed A. NomanMohammed A. Noman
Mohammed A. Noman
Human errors (HEs) are prevalent issues in manual assembly, leading to product defects and increased costs. Understanding and knowing the factors influencing human errors in manual assembly processes is essential for improving product quality and efficiency. This study aims to determine and rank factors influencing HEs in manual assembly processes based on expert judgments. To achieve this objective, an integrated model was developed using two multi-criteria decision-making (MCDM) techniques—specifically, the fuzzy Delphi Method (FDM) and the fuzzy Analytic Hierarchy Process (FAHP). Firstly, two rounds of the FDM were conducted to identify and categorize the primary factors contributing to HEs in manual assembly. Expert consensus with at least 75% agreement determined that 27 factors with influence scores of 0.7 or higher significantly impact HEs in these processes. After that, the priorities of the 27 influencing factors in assembly HEs were determined using a third round of the FAHP method. Data analysis was performed using SPSS 22.0 to evaluate the reliability and normality of the survey responses. This study has divided the affecting factors on assembly HEs into two levels: level 1, called main factors, and level 2, called sub-factors. Based on the final measured weights for level 1, the proposed model estimation results revealed that the most influential factors on HEs in a manual assembly are the individual factor, followed by the tool factor and the task factor. For level 2, the model results showed a lack of experience, poor instructions and procedures, and misunderstanding as the most critical factors influencing manual assembly errors. Sensitivity analysis was performed to determine how changes in model inputs or parameters affect final decisions to ensure reliable and practical results. The findings of this study provide valuable insights to help organizations develop effective strategies for reducing worker errors in manual assembly. Identifying the key and root factors contributing to assembly errors, this research offers a solid foundation for enhancing the overall quality of final products.

1 January 2016 in International Journal of Collaborative Enterprise
Verified
Journal Article
Closed access
Husam KaidHusam Kaid
Husam Kaid
Mohammed A. NomanMohammed A. Noman
Mohammed A. Noman
Emad Abouel NasrEmad Abouel Nasr
Emad Abouel Nasr
MAMohammed Alkahtani
Mohammed Alkahtani
Six Sigma has been used by large organisations to improve the performance of their manufacturing processes. The objective of this paper is to analyse the problem of increasing demand of flour in wafer biscuit production in Y Company. This problem leads to decrease profit and external customer satisfaction. In this study, define, measure, analyse, improve and control (DMAIC) methodology of Six Sigma is used to develop the solutions for the problem. Root causes are determined by using cause-and-effect analysis. Pareto chart helped to focus attention on the major important root causes. Moreover, a brainstorming concept was conducted with experts from the production, maintenance and quality control departments, which helped in formulating the solutions. The study presents the applicability, feasibility and impact of DMAIC methodology on the company, which carried out the reduction in deviation rate of flour material usage from approximately 27.55-10.45% on the production line.

25 December 2021 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
Mohammed A. NomanMohammed A. Noman
Mohammed A. Noman
MAMoath Alatefi
Moath Alatefi
Abdulrahman Al-AhmariAbdulrahman Al-Ahmari
Abdulrahman Al-Ahmari
TATamer Gawad Ali
Tamer Gawad Ali
Recently, several heuristics have been interested in scheduling problems, especially those that are difficult to solve via traditional methods, and these are called NP-hard problems. As a result, many methods have been proposed to solve the difficult scheduling problems; among those, effective methods are the tabu search algorithm (TS), which is characterized by its high ability to adapt to problems of the large size scale and ease of implementation and gives solution closest to the optimum, but even though those difficult problems are common in many industries, there are only a few numbers of previous studies interested in the scheduling of jobs on unrelated parallel machines. In this paper, a developed TS algorithm based on lower bound (LB) and exact algorithm (EA) solutions is proposed with the objective of minimizing the total completion time (makespan) of jobs on nonidentical parallel machines. The given solution via EA was suggested to enhance and assess the solution obtained from TS. Moreover, the LB algorithm was developed to evaluate the quality of the solution that is supposed to be obtained by the developed TS algorithm and, in addition, to reduce the period for searching for the optimal solution. Two numerical examples from previous studies from the literature have been solved using the developed TS algorithm. Findings show that the developed TS algorithm proved its superiority and speed in giving it the best solution compared to those solutions previously obtained from the literature.