This Feature Article systematically outlines the recent progress in the fabrication strategies and applications of pillar[ n ]arene-mediated metal nanomaterials in different areas. A brief outlook on the future development of them is also presented.

Small-hole structures, such as the millions of fastener holes found on aircraft, are typical stress-concentration structures prone to fatigue failure. To further improve the strengthening process of this small-hole structure, we make up for the limitations of laser shock processing (LSP) of small holes by combining it with the ultrasonic extrusion strengthening (UES) process to form a new strengthening method—laser shock and ultrasonic extrusion strengthening (LUE). The influence of the LUE process sequence and process parameters on residual stress distribution was studied through FEM, and the gain of fatigue life of specimens after LUE strengthening was also explored through tests. The results show that when using LUE technology, the friction force decreases with the increase in amplitude and decreases by 3.2% when the amplitude is maximum. The LUE process eliminates the thickness effect generated by LSP, which can achieve good stress distribution of small-hole components under smaller laser shock peak pressure, and reduces equipment power. LUE can significantly improve the fatigue life of small-hole components, and the maximum fatigue life gain can be up to 310.66%.

Ultrasonic vibration-assisted con-rod fracture splitting (UV-CFS) was used to carry out the fracture experiment of 1045 quenched and tempered steel. The effect of ultrasonic vibration on the fracture properties was studied, the fracture microstructure and the evolution of dislocations near the fracture were analyzed and the microscopic mechanism was analyzed. The results show that in the case of conventional fracture splitting without amplitude, the dimple and the fracture belong to ductile fracture. With the increase in ultrasonic amplitude, the plasticity and pore deformation of the con-rod samples decrease at first and then increase; when the amplitude reaches a certain point, the load required for cracking is reduced to a minimum and the ultrasonic hardening effect is dominant, resulting in a decrease in the plasticity of the sample, a cleavage fracture, a brittle fracture, the minimum pore deformation and high cracking quality. The research results also show that with the increase in ultrasonic amplitude, the fracture dislocation density decreases at first, then increases, and dislocation entanglement and grain breakage appear, then decrease, and multiple dislocation slip trajectories appear. The changes in the dislocation density and microstructure are consistent with the above results.

The combination of chemodynamic therapy (CDT) and gas therapy holds significant promise for tumor treatment. In this study, we successfully synthesized an intelligent H₂O₂-responsive Fe-MOF nanotherapeutic agent, integrated with glucose oxidase (GOx) and manganese carbonyl (MnCO), to achieve synergistic cancer gas/CDT. Upon endocytosis by tumor cells, the nanotherapeutic agent catalyzes the conversion of endogenous glucose into gluconic acid and H₂O₂, which facilitates the release of CO gas and disrupts the energy supply. Subsequently, a Fenton reaction occurs between Fe-MOFs and intracellular H₂O₂, generating highly toxic hydroxyl radicals (˙OH) for CDT. Therefore, the engineered nanotherapeutic agent demonstrates a synergistic efficacy through CO gas therapy, reactive oxygen species (ROS)-mediated CDT, and energy starvation, effectively suppressing tumor growth.

Sealing treatment is widely used as a simple and low-cost process to improve the long-term corrosion resistance of Fe-based amorphous coatings. In this study, an eco-friendly graphene modified waterborne acrylic sealant(WFS) with strong permeability was prepared by emulsion polymerization and GO@SiO₂ was introduced as a reinforcing material to increase the withstand resistance of the hybrid sealant to Cl⁻. A combination of ultrasonic excitation and vacuum sealing effectively promotes the penetration of the waterborne hybrid sealant into the pores of the coating. A 3D X-ray scan confirmed the sealant penetration depth of 160 μm. The natural properties of the emulsion were characterized by a particle size analyzer, FTIR, TGA-DSC and TEM. Potentiodynamic polarization curves and AC impedance spectroscopy analysis showed that GO@SiO₂ has a strong blocking ability to Cl⁻, which greatly promotes the integrity of the passive film. It is anticipated that the novel eco-friendly waterborne hybrid sealants with strong permeability will find applications in a variety of porous hard coatings.