Evgeniy Popov

Mr. Evgeniy Popov

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 December 2023 in Bulletin of the Tomsk Polytechnic University Geo Assets Engineering
Verified
Journal Article
Open access
PDF file
AGAlexander Glazyrin
Alexander Glazyrin
INIvan A. Nabunskiy
Ivan A. Nabunskiy
SPSemen Popov
Semen Popov
EBEvgeniy Vladimirovich Bolovin
Evgeniy Vladimirovich Bolovin
ВТВадим Владимирович Тимошкин
Вадим Владимирович Тимошкин
VKVladimir Kovalev
Vladimir Kovalev
Relevance. The stock of oil wells in the Russian Federation, where production is carried out with the help of electric centrifugal pumps or electric-driven vane pumps, is expanding every year. This trend will continue for at least a couple of decades. In its turn, the number of wells with readily available oil products in the commissioned stock is decreasing. This leads to the need to improve production quality and reduce energy consumption to maintain profitability and production volumes. This can be achieved by implementing vector energy-efficient control systems for submersible motors based on observers of induction motor state variables. In this case one should take into account transients in the supply cable of considerable length, which transmits energy from a frequency converter to a motor. The observers are based on adjustable mathematical models that describe electrical, electromechanical and mechanical processes in electric drive and related process automation systems as reliably as possible. Using complex and cumbersome adjustable mathematical models in digital signal processors due to limited performance and memory causes objective difficulties in obtaining solutions of increased accuracy in real time. On this basis, the development of an analytical model of the dynamic system "long cable – submersible induction motor with fixed rotor" in the polar coordinate system is an urgent task. Aim. Development of analytical description of the mathematical model of the induction motor with a fixed rotor in the polar coordinate system taking into account the influence of a long cable. Methods. Electric drive theory, electric machine theory, mathematical models of submersible induction motors and reduced long cable model, Vandermonde's determinant, analytical methods for solving differential equations. Result and conclusions. The authors have developed an analytical model of the regulated induction motor with a fixed rotor in the polar coordinate system taking into account the supply cable of considerable length. The developed analytical model is recommended for use in vector energy-efficient electric drive with application of phase discrimination principles taking into account the influence of processes in the supply cable line. Such electric drive has a potential for increasing the profitability of oil production from low- and medium-debt wells. Актуальность. Фонд нефтяных скважин Российской Федерации, в которых добыча производится с помощью установок электроцентробежных насосов или электроприводных лопастных насосов с каждым годом расширяется, и такая тенденция будет сохраняться минимум пару десятков лет. В свою очередь количество скважин с легкодоступными нефтепродуктами во введенном в эксплуатацию фонде уменьшается, что приводит к необходимости улучшения качества добычи и уменьшения энергозатрат для сохранения рентабельности и объемов добычи. Добиться этого возможно с помощью внедрения векторных энергоэффективных систем управления погружными двигателями на основе наблюдателей переменных состояния асинхронных электродвигателей с учетом переходных процессов в питающем кабеле значительной длины, передающем энергию от преобразователя частоты к двигателю. Основой наблюдателей являются настраиваемые математические модели, максимально достоверно описывающие электрические, электромеханические и механические процессы в электроприводе и связанных с ним системах автоматизации технологических процессов. Однако применение сложных и громоздких настраиваемых математических моделей в цифровых сигнальных процессорах из-за ограниченности производительности и памяти вызывает объективные трудности в получении решений повышенной точности в реальном масштабе времени. На основании этого разработка аналитической модели динамической системы «длинный кабель – погружной асинхронный двигатель с заторможенным ротором» в полярной системе координат является актуальной задачей. Цель: разработка аналитического описания настраиваемой математической модели регулируемого асинхронного двигателя с заторможенным ротором в полярной системе координат с учетом влияния длинного кабеля. Методы: теория электропривода, теории электрических машин, математические модели погружных асинхронных двигателей и редуцированной модели длинного кабеля, определитель Вандермонда,...

30 September 2024 in Bulletin of the Tomsk Polytechnic University Geo Assets Engineering
Verified
Journal Article
Open access
PDF file
AGAlexander Glazyrin
Alexander Glazyrin
SPSemen Popov
Semen Popov
EPEvgeniy Popov
Evgeniy Popov
VKVladimir Kopyrin
Vladimir Kopyrin
РХРустам Хамитов
Рустам Хамитов
ЕБЕвгения Александровна Беляускене
Евгения Александровна Беляускене
Relevance. When operating submersible equipment for oil production in aggressive environments and transferring wells to the cyclic operation mode, a decrease in the service life of the submersible installation for oil production is observed. In the first case, this is due to the formation of salt deposits and clogging of the working parts of the electric pump with mechanical impurities. In the second case – an increase in the number of starts of the submersible electric motor. To solve the existing problems, it is possible to implement closed control systems for submersible electric motors based on state variable observers, which determines the relevance of the study. Aim. To develop an observer with operational monitoring of the angular velocity of the rotor and the moment of resistance on the shaft of a submersible asynchronous motor at inconsistency of the initial conditions in various operating modes and its testing using modeling tools. Methods. The observer is built on the basis of known engine models in a fixed coordinate system α, β, the theory of IIR-filters to obtain a forecast of estimates of the angular velocity of the rotor and the torque on the shaft and their correction in real time. Results. The authors have proposed the original structure of an observer with operational monitoring of the angular velocity of the rotor and the moment of resistance on the shaft of a submersible asynchronous motor. Conclusions. The paper demonstrates the observer performance with inconsistency of initial conditions and electric motor model data in various operating modes. In all modes, stable estimates of the speed and torque of resistance on the electric motor shaft are obtained. At the same time, the error in estimating the angular velocity under the condition of changing the load on the shaft and starting in the loaded state is no more than 1.2%, which is acceptable in submersible electric motor control systems. It is revealed that the developed observer, under the condition of changing the active resistance of the stator and rotor in the ranges from –25 to +25% of the nominal value, obtains estimates of the angular velocity with an integral error of no more than 5%, except for starting the motor with a decrease in the active resistance of the rotor by 25% of the nominal value –5.53%, which is acceptable in engineering practice.

30 December 2023 in Известия ТПУ. Промышленная кибернетика.
Verified
Journal Article
Open access
PDF file
AGAlexander Glazyrin
Alexander Glazyrin
EPEvgeniy Popov
Evgeniy Popov
VKVladimir Kopyrin
Vladimir Kopyrin
KSKladiev Sergey
Kladiev Sergey
The classical approach to modeling pulse-width converters feeding a DC motor with independent excitation using a first-order linear differential equation can significantly simplify and speed up the calculation of a dynamic system. However, in this case, information about high-frequency physical processes occurring in a real system is lost. The article proposes an analytical model of the dynamic system “pulse-width converter – DC motor with independent excitation” with representation of the pulse-width converter model as a rectangular signal obtained as a sum of delayed Heaviside functions. The proposed analytical model is recommended for investigation of dynamic modes of DC motors with independent excitation and allows one to analytically apply methods of automatic control theory to a dynamic system, as well as obtain complete information about the spectral composition of state variables. Классический подход к моделированию широтно-импульсных преобразователей, питающих двигатель постоянного тока с независимым возбуждением, линейным дифференциальным уравнением первого порядка позволяет существенно упростить и ускорить расчет динамической системы. Однако при этом теряется информация о высокочастотных физических процессах, протекающих в реальной системе. В статье предложена аналитическая модель динамической системы «широтно-импульсный преобразователь – двигатель постоянного тока с независимым возбуждением» с представлением модели широтно-импульсного преобразователя как прямоугольного сигнала, получаемого в виде суммы задержанных функций Хевисайда. Предложенная аналитическая модель рекомендована для исследования динамических режимов электроприводов постоянного тока с независимым возбуждением и позволяет аналитически применять методы теории автоматического управления к динамической системе, а также получать полную информацию о спектральном составе переменных состояния.

27 November 2024 in Bulletin of the Tomsk Polytechnic University Geo Assets Engineering
Verified
Journal Article
Open access
PDF file
AGAlexander Glazyrin
Alexander Glazyrin
EPEvgeniy Popov
Evgeniy Popov
VKVladimir Kopyrin
Vladimir Kopyrin
SPSemen Popov
Semen Popov
EBEvgeniy Vladimirovich Bolovin
Evgeniy Vladimirovich Bolovin
ВТВадим Владимирович Тимошкин
Вадим Владимирович Тимошкин
Relevance. Currently, when using submersible electric motors in centrifugal electric pump installations in cyclic operation mode, there is a reduction in the inter-repair period of submersible equipment, which is associated with a reduction in oil pumping periods to several minutes. As a result, there is a multiple increase in starting currents and torque, which leads to an increase in mechanical loads on the pump shaft and appearance of resonance phenomena during the electric motor acceleration, reducing the reliability of a seal protection. To solve these problems, it is necessary to synthesize closed-loop vector control systems with current and electromagnetic torque control in transient responses. Open-loop scalar control systems for electric drives of oil well production are used in operation, which is due to the complexity of obtaining feedback signals on the angular velocity of the rotor and the moment of resistance on the shaft by means of submersible telemetry. This problem determines the relevance and necessity of developing observers for rotor speed and load torque estimation, taking into account the features of the technological process of installing centrifugal electric pumps, in particular, the presence of a long cable for powering a submersible electric motor based on a synchronous machine with permanent magnets. Aim. To develop a full-order observer rotor speed and load torque for the dynamic system "long supply cable – synchronous motor with permanent magnets". Methods. System analysis and identification of dynamic systems, synthesis of Luenberger observers, mathematical modeling of dynamic systems, electric drives and electrical machines. Result and conclusions. The authors have proposed the mathematical model of a rotor speed and load torque full-order observer for the dynamic system "long supply cable – synchronous motor with permanent magnets". The performance of the observer was investigated under varying load on the shaft, mismatch of non-zero initial conditions, deviation of the parameters of the equivalent circuit of the observer and the object in the range from –20 to +20% of the nominal values.

27 March 2025 in Analysis and data processing systems
Verified
Journal Article
Closed access
EPEvgeniy Popov
Evgeniy Popov
AGAlexander S. Glazyrin
Alexander S. Glazyrin
VKVladimir Kopyrin
Vladimir Kopyrin
The paper considers the issues of application of discrete models of dynamic systems based on multi-step methods for identification and parameter estimation problems based on a small number of observations using the example of a first-order aperiodic unit. The problem of identification of parameters of dynamic systems is relevant in control problems of stationary and non-stationary dynamic systems, for example, in sensorless control systems of synchronous or asynchronous electric drives of submersible centrifugal electric pumps operating in intermittent operation mode. The problem of parameter estimation was solved in the classical formulation of the least squares method without taking into account a priori information about the nature of noise in the measuring channels. It was shown that the accuracy of parameter estimation depends not only on the norm of the interference vector, but also on its orientation relative to the column space of the information matrix, as well as on the condition number of the information matrix. The matrix formation structure and the problem conditionality depend on the selected approximation method of the state variable derivative. It has been clarified that the obtained parameter estimation results require additional post-filtering for use in closed-loop control systems for reasons of stability. According to the obtained results, implicit multi-step methods can be recommended for most engineering applications in the problems of estimating the parameters of linear and nonlinear systems. The highest accuracy of estimating the parameters of the aperiodic link in terms of the moving average for the entire considered section of the simulation was achieved using the Tustin and Milne methods for transition to discrete time, which allowed for a higher degree of conditionality of the problem compared to other methods.

24 December 2024 in Electrotechnical Systems and Complexes
Verified
Journal Article
Closed access
AGAlexander Glazyrin
Alexander Glazyrin
EPEvgeniy Popov
Evgeniy Popov
VKVladimir Kopyrin
Vladimir Kopyrin
NMNpf Mechatronica-Pro
Npf Mechatronica-Pro
SPSemen Popov
Semen Popov
EBEvgeniy Vladimirovich Bolovin
Evgeniy Vladimirovich Bolovin