Semen Popov

Mr. Semen Popov

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 December 2023 in Bulletin of the Tomsk Polytechnic University Geo Assets Engineering
Verified
Journal Article
Open access
PDF file
AGAlexander Glazyrin
Alexander Glazyrin
INIvan A. Nabunskiy
Ivan A. Nabunskiy
SPSemen Popov
Semen Popov
EBEvgeniy Vladimirovich Bolovin
Evgeniy Vladimirovich Bolovin
ВТВадим Владимирович Тимошкин
Вадим Владимирович Тимошкин
VKVladimir Kovalev
Vladimir Kovalev
Relevance. The stock of oil wells in the Russian Federation, where production is carried out with the help of electric centrifugal pumps or electric-driven vane pumps, is expanding every year. This trend will continue for at least a couple of decades. In its turn, the number of wells with readily available oil products in the commissioned stock is decreasing. This leads to the need to improve production quality and reduce energy consumption to maintain profitability and production volumes. This can be achieved by implementing vector energy-efficient control systems for submersible motors based on observers of induction motor state variables. In this case one should take into account transients in the supply cable of considerable length, which transmits energy from a frequency converter to a motor. The observers are based on adjustable mathematical models that describe electrical, electromechanical and mechanical processes in electric drive and related process automation systems as reliably as possible. Using complex and cumbersome adjustable mathematical models in digital signal processors due to limited performance and memory causes objective difficulties in obtaining solutions of increased accuracy in real time. On this basis, the development of an analytical model of the dynamic system "long cable – submersible induction motor with fixed rotor" in the polar coordinate system is an urgent task. Aim. Development of analytical description of the mathematical model of the induction motor with a fixed rotor in the polar coordinate system taking into account the influence of a long cable. Methods. Electric drive theory, electric machine theory, mathematical models of submersible induction motors and reduced long cable model, Vandermonde's determinant, analytical methods for solving differential equations. Result and conclusions. The authors have developed an analytical model of the regulated induction motor with a fixed rotor in the polar coordinate system taking into account the supply cable of considerable length. The developed analytical model is recommended for use in vector energy-efficient electric drive with application of phase discrimination principles taking into account the influence of processes in the supply cable line. Such electric drive has a potential for increasing the profitability of oil production from low- and medium-debt wells. Актуальность. Фонд нефтяных скважин Российской Федерации, в которых добыча производится с помощью установок электроцентробежных насосов или электроприводных лопастных насосов с каждым годом расширяется, и такая тенденция будет сохраняться минимум пару десятков лет. В свою очередь количество скважин с легкодоступными нефтепродуктами во введенном в эксплуатацию фонде уменьшается, что приводит к необходимости улучшения качества добычи и уменьшения энергозатрат для сохранения рентабельности и объемов добычи. Добиться этого возможно с помощью внедрения векторных энергоэффективных систем управления погружными двигателями на основе наблюдателей переменных состояния асинхронных электродвигателей с учетом переходных процессов в питающем кабеле значительной длины, передающем энергию от преобразователя частоты к двигателю. Основой наблюдателей являются настраиваемые математические модели, максимально достоверно описывающие электрические, электромеханические и механические процессы в электроприводе и связанных с ним системах автоматизации технологических процессов. Однако применение сложных и громоздких настраиваемых математических моделей в цифровых сигнальных процессорах из-за ограниченности производительности и памяти вызывает объективные трудности в получении решений повышенной точности в реальном масштабе времени. На основании этого разработка аналитической модели динамической системы «длинный кабель – погружной асинхронный двигатель с заторможенным ротором» в полярной системе координат является актуальной задачей. Цель: разработка аналитического описания настраиваемой математической модели регулируемого асинхронного двигателя с заторможенным ротором в полярной системе координат с учетом влияния длинного кабеля. Методы: теория электропривода, теории электрических машин, математические модели погружных асинхронных двигателей и редуцированной модели длинного кабеля, определитель Вандермонда,...

30 September 2024 in Bulletin of the Tomsk Polytechnic University Geo Assets Engineering
Verified
Journal Article
Open access
PDF file
AGAlexander Glazyrin
Alexander Glazyrin
SPSemen Popov
Semen Popov
EPEvgeniy Popov
Evgeniy Popov
VKVladimir Kopyrin
Vladimir Kopyrin
РХРустам Хамитов
Рустам Хамитов
ЕБЕвгения Александровна Беляускене
Евгения Александровна Беляускене
Relevance. When operating submersible equipment for oil production in aggressive environments and transferring wells to the cyclic operation mode, a decrease in the service life of the submersible installation for oil production is observed. In the first case, this is due to the formation of salt deposits and clogging of the working parts of the electric pump with mechanical impurities. In the second case – an increase in the number of starts of the submersible electric motor. To solve the existing problems, it is possible to implement closed control systems for submersible electric motors based on state variable observers, which determines the relevance of the study. Aim. To develop an observer with operational monitoring of the angular velocity of the rotor and the moment of resistance on the shaft of a submersible asynchronous motor at inconsistency of the initial conditions in various operating modes and its testing using modeling tools. Methods. The observer is built on the basis of known engine models in a fixed coordinate system α, β, the theory of IIR-filters to obtain a forecast of estimates of the angular velocity of the rotor and the torque on the shaft and their correction in real time. Results. The authors have proposed the original structure of an observer with operational monitoring of the angular velocity of the rotor and the moment of resistance on the shaft of a submersible asynchronous motor. Conclusions. The paper demonstrates the observer performance with inconsistency of initial conditions and electric motor model data in various operating modes. In all modes, stable estimates of the speed and torque of resistance on the electric motor shaft are obtained. At the same time, the error in estimating the angular velocity under the condition of changing the load on the shaft and starting in the loaded state is no more than 1.2%, which is acceptable in submersible electric motor control systems. It is revealed that the developed observer, under the condition of changing the active resistance of the stator and rotor in the ranges from –25 to +25% of the nominal value, obtains estimates of the angular velocity with an integral error of no more than 5%, except for starting the motor with a decrease in the active resistance of the rotor by 25% of the nominal value –5.53%, which is acceptable in engineering practice.

27 November 2024 in Bulletin of the Tomsk Polytechnic University Geo Assets Engineering
Verified
Journal Article
Open access
PDF file
AGAlexander Glazyrin
Alexander Glazyrin
EPEvgeniy Popov
Evgeniy Popov
VKVladimir Kopyrin
Vladimir Kopyrin
SPSemen Popov
Semen Popov
EBEvgeniy Vladimirovich Bolovin
Evgeniy Vladimirovich Bolovin
ВТВадим Владимирович Тимошкин
Вадим Владимирович Тимошкин
Relevance. Currently, when using submersible electric motors in centrifugal electric pump installations in cyclic operation mode, there is a reduction in the inter-repair period of submersible equipment, which is associated with a reduction in oil pumping periods to several minutes. As a result, there is a multiple increase in starting currents and torque, which leads to an increase in mechanical loads on the pump shaft and appearance of resonance phenomena during the electric motor acceleration, reducing the reliability of a seal protection. To solve these problems, it is necessary to synthesize closed-loop vector control systems with current and electromagnetic torque control in transient responses. Open-loop scalar control systems for electric drives of oil well production are used in operation, which is due to the complexity of obtaining feedback signals on the angular velocity of the rotor and the moment of resistance on the shaft by means of submersible telemetry. This problem determines the relevance and necessity of developing observers for rotor speed and load torque estimation, taking into account the features of the technological process of installing centrifugal electric pumps, in particular, the presence of a long cable for powering a submersible electric motor based on a synchronous machine with permanent magnets. Aim. To develop a full-order observer rotor speed and load torque for the dynamic system "long supply cable – synchronous motor with permanent magnets". Methods. System analysis and identification of dynamic systems, synthesis of Luenberger observers, mathematical modeling of dynamic systems, electric drives and electrical machines. Result and conclusions. The authors have proposed the mathematical model of a rotor speed and load torque full-order observer for the dynamic system "long supply cable – synchronous motor with permanent magnets". The performance of the observer was investigated under varying load on the shaft, mismatch of non-zero initial conditions, deviation of the parameters of the equivalent circuit of the observer and the object in the range from –20 to +20% of the nominal values.

14 August 2025 in Energies
Verified
Journal Article
Open access
PDF file
AGAlexander Glazyrin
Alexander Glazyrin
DBDmitriy Bunkov
Dmitriy Bunkov
EBEvgeniy Vladimirovich Bolovin
Evgeniy Vladimirovich Bolovin
YIYusup Niyazbekovich Isaev
Yusup Niyazbekovich Isaev
VKVladimir Kopyrin
Vladimir Kopyrin
MDMarina Deneko
Marina Deneko
Currently, wind turbines utilize doubly fed induction machines that incorporate a frequency converter in the rotor circuit to manage slip energy. This setup ensures a stable voltage amplitude and frequency that align with the alternating current. It is crucial to accurately determine the parameters of the equivalent circuit from the rotor side of the vector control system of the frequency converter. The objective of this study is to develop a method for the preliminary identification of the doubly fed induction machines parameters by analyzing the rotor current decay curves using Newton’s method. The numerical estimates of the equivalent circuit parameters a doubly fed induction machines with a fixed short-circuited rotor are obtained during the validation of the results on a real plant. It is along with the integral errors of deviation between the experimental rotor current decay curve and the response of the adaptive regression model. The integral errors do not exceed 4% in nearly all sections of the curves. It is considered acceptable in engineering practice. The developed algorithm for the preliminary identification for the parameters of the doubly fed induction machines substitution scheme can be applied with the configuring machines control systems, including a vector control system.

29 August 2025 in Bulletin of the Tomsk Polytechnic University Geo Assets Engineering
Verified
Journal Article
Open access
PDF file
AGAlexander Glazyrin
Alexander Glazyrin
EPEvgeniy Popov
Evgeniy Popov
VKVladimir Kopyrin
Vladimir Kopyrin
РХРустам Хамитов
Рустам Хамитов
VKVladimir Kovalev
Vladimir Kovalev
ЕБЕвгения Александровна Беляускене
Евгения Александровна Беляускене
Relevance. Currently, the majority of oil production is carried out using centrifugal electric pumps, and the share of installations operating in periodic modes with cycles of accumulation and pumping of liquid is increasing every year. At the same time, the latest studies of the reliability of their components show that the mean time between failures of submersible equipment is reduced to 2.5 times compared to equipment in continuous operation modes. The decrease in reliability is associated with the dynamics of transient processes in automated lower-level control systems, which is currently not taken into account when developing management decisions to optimize well operation, and the entire lower-level subsystem, as a rule, is represented by linear or nonlinear static links. This approach does not allow controlling the dynamics of processes within the subsystem itself in the conditions of wells being transferred to intermittent operating modes. This determines the relevance of developing dynamic models of the submersible pump electric drive subsystem in order to optimize transient processes according to the criterion of the time between failures of submersible equipment elements. Aim. Improving models of lower-level automated control systems for a submersible electric motor of a centrifugal electric pump installation for oil production under conditions of switching a well to periodic operation mode in order to improve controllability. Methods. Methods of system analysis and structural-parametric synthesis of automated control systems of technological processes, methods of designing vector control systems for electric drives, methods of identifying state variables based on observers using explicit mathematical models, methods of parametric identification of customizable models of non-stationary dynamic systems. Results. The authors have proposed the approach to constructing an operational control level for centrifugal electric pump installations, including the introduction of closed sensorless electric drive systems using state observers based on explicit adjustable mathematical models of the non-stationary dynamic system "long cable – submersible adjustable electric machine" and methods of their dynamic identification, creating prerequisites for further formulation and solution of problems of optimizing dynamic processes within the lower-level subsystem under conditions of transferring the well to intermittent operating modes. A transition to dynamic models of automated lower-level control systems based on reduced mathematical models of the electrical subsystem of centrifugal electric pump installations is proposed for increasing controllability and taking into account the physical limitations of available measuring instruments.

9 October 2024 in Известия ТПУ. Промышленная кибернетика.
Verified
Journal Article
Open access
PDF file
AGAlexander Glazyrin
Alexander Glazyrin
EPEvgeniy Popov
Evgeniy Popov
SPSemen Popov
Semen Popov
VKVladimir Kopyrin
Vladimir Kopyrin
KSKladiev Sergey
Kladiev Sergey
VKVladimir Kovalev
Vladimir Kovalev
Применение цифровых двойников в задачах управления электроприводами обусловлено постоянно возрастающими требованиями к качеству переходных процессов. Цифровой двойник динамической системы представляет собой дискретную модель, применение которой всегда влечет за собой некоторую потерю точности и появление искажений в частотной области. Математические модели кабельных линий характеризуются относительно малыми постоянными времени, что накладывает условия на выбор частоты дискретизации согласно требованиям, предъявляемым теоремой Котельникова–Шеннона. Однако на практике выбор периода дискретизации ограничивается вычислительной мощностью цифрового сигнального процессора. Вследствие этого целью статьи является определение границ применимости в частотной области существующих способов перехода в Z-область методом аналоговых прототипов путем проведения сравнительного анализа погрешности аппроксимации частотных характеристик аналогового прототипа цифровыми моделями RLC-фильтра низких частот для каждого из способов. Установлено, что увеличение периода дискретизации ведет к расхождению между цифровыми моделями и их аналоговыми прототипами в интегральном смысле на всей области частот. Кроме того, это приводит к потере информации о таких физических процессах в реальной системе, как резонанс или изменение фазы сигнала на выходе динамической системы. Для большинства инженерных задач может быть рекомендован метод Тастина при соответствующих допущениях о стационарности динамической системы. Однако при появлении признаков нестационарности или повышенных требованиях к конструированию регуляторов, по мнению авторов, стоит обратить внимание на аналитические модели динамических систем.