This study investigated the application of neural network techniques to predict the mechanical properties of low-carbon hot-rolled steel strips using industrial data. A feedforward neural network (FFNN) model was developed to predict the yield strength (YS), ultimate tensile strength (UTS), and elongation (%EL) based on the chemical composition and processing parameters. For the low-carbon hot-rolled steel strip (C: 0.02–0.06%, Mn: 0.17–0.38%), 435 datasets were utilized with 17 input parameters, including 15 composition elements, finish rolling temperature (FRT), and coil target temperature (CTT). The model was trained using 335 datasets and tested using 100 randomly selected datasets. The optimum network architecture consisted of two hidden layers with 34 neurons each, achieving a mean squared error of 0.014 after 200,000 iterations. The model predictions showed excellent agreement with the actual values, with mean percentage errors of 4.44%, 3.54%, and 4.84% for the YS, UTS, and %EL, respectively. The study further examined the influence of FRT and CTT on mechanical properties, demonstrating that FRT has more complex effects on mechanical properties than CTT. The model successfully predicted property variations with different processing parameters, thereby providing a valuable tool for alloy design and process optimization in steel manufacturing.
1 January 2024 in Journal of the Mechanical Behavior of Materials
Comparing polymer matrix composites with conventional composites, such as continuous fiber-reinforced composites, shows a considerable increase in strength and fracture toughness. In this study, compression molding was used to create hybrid (carbon and silk fabric-reinforced) and carbon fabric-reinforced epoxy matrix composites using a hand layup process. This article discusses the evaluated flexural strength (FS) and plane strain Mode-I fracture toughness of composite materials. The impact of carbon fabric reinforcement on the fracture toughness of these composites was assessed using the obtained results. It was found that the addition of silk fabric reinforcement decreased the hybrid composite’s plane strain Mode-I fracture toughness. Fracture toughness and FS are higher in carbon fabric-reinforced composite than in hybrid composite.
1 January 2025 in Journal of the Mechanical Behavior of Materials
Micro electro-discharge machining, commonly known as MicroEDM, is used in the manufacturing industry for micromachining due to its benefits over conventional manufacturing. Titanium and its alloys find their application in various sectors. Titanium Beta-C alloy is one such alloy, especially employed in the oilfield and underwater sectors. Various applications in these fields need to have microholes embedded in them. Moreover, these parts need to possess high strength and be corrosion-resistant. Hence, the surface integrity of this alloy is critical. The intent behind this investigation is to evaluate the surface integrity characteristics of Titanium Beta-C alloy by performing microhole drilling using microEDM process parameters. In this study, surface integrity characteristics like surface topography and morphology are investigated by drilling microholes using brass electrodes of 300 µm in L9 orthogonal array experiments. Pulse on time, pulse off time, voltage, and current as pulse parameters are employed. Responses measured are surface roughness ( Ra ), SEM microstructure, and energy dispersive X-ray analysis. This investigation shows the formation of irregular shapes of the craters on the surface of microholes drilled in Titanium Beta-C alloy. Additionally, these surfaces exhibit shallow crater depths and do not show the presence of cracks.