Carbon fiber reinforced polymer (CFRP) composites have been extensively used in airframes, train bodies, and engine blades for their properties of high strength, low weight, and good stability. The in-service structural performance of CFRP composites is always an important point to be investigated for its influence on structural safety. For this reason, CFRP composite plates assembled with fiber Bragg grating (FBG) sensors were developed, and the in-service structural characteristics of the CFRP plates were interpreted by FBG signals measured through time. A theoretical analysis supported by a numerical method has been provided. Experimental testing was conducted to check the proposed sensing technique for the dynamic response identification of the CFRP plate. The curing process of the bilayer CFRP plated inserted with FBGs in series was also explored. The results showed that the surface-attached FBGs in series could accurately characterize the dynamic response of the CFRP plate, and a good agreement between the numerical and testing results was observed. The strain and temperature distributions during the curing process of the bilayer plate indicated that the in-service structural performance of bilayer CFRP plates can be configured by the assembled FBG sensors. This study can support the structural health monitoring of projects by using CFRP composites.
The in-situ health condition of carbon fiber reinforced polymer (CFRP) reinforced structures has become an important topic, which can reflect the structural performance of the retrofitted structures and judge the design theory. An optical fiber-based structural health monitoring technique is thus suggested. To check the effectiveness of the proposed method, experimental testing on smart CFRP reinforced steel beams under impact action has been performed, and the dynamic response of the structure has been measured by the packaged FBG sensors attached to the surface of the beam and the FBG sensors inserted in the CFRP plates. Time and frequency domain analysis has been conducted to check the structural feature of the structures and the performance of the installed sensors. Results indicate that the packaged Fiber Bragg Grating (FBG) sensors show better sensing performance than the bare FBG sensors in perceiving the impact response of the beam. The sensors embedded in the CFRP plate show good measurement accuracy in sensing the external excitation and can replace the surface-attached FBG sensors. The dynamic performance of the reinforced structures subjected to the impact action can be straightforwardly read from the signals of FBG sensors. The larger impact energies bring about stronger impact signals.