chen cong

Mr. chen cong


Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

5 September 2021 in Symmetry
Verified
Journal Article
Open access
PDF file
Huaping WangHuaping Wang
Huaping Wang
Hao ChenHao Chen
Hao Chen
CCchen cong
chen cong
HZHuyuan ZHang
Huyuan ZHang
HJHao Jiang
Hao Jiang
SFSi-Yuan Feng
Si-Yuan Feng
Carbon fiber reinforced polymer (CFRP) composites have been extensively used in airframes, train bodies, and engine blades for their properties of high strength, low weight, and good stability. The in-service structural performance of CFRP composites is always an important point to be investigated for its influence on structural safety. For this reason, CFRP composite plates assembled with fiber Bragg grating (FBG) sensors were developed, and the in-service structural characteristics of the CFRP plates were interpreted by FBG signals measured through time. A theoretical analysis supported by a numerical method has been provided. Experimental testing was conducted to check the proposed sensing technique for the dynamic response identification of the CFRP plate. The curing process of the bilayer CFRP plated inserted with FBGs in series was also explored. The results showed that the surface-attached FBGs in series could accurately characterize the dynamic response of the CFRP plate, and a good agreement between the numerical and testing results was observed. The strain and temperature distributions during the curing process of the bilayer plate indicated that the in-service structural performance of bilayer CFRP plates can be configured by the assembled FBG sensors. This study can support the structural health monitoring of projects by using CFRP composites.

24 August 2022 in Sensors
Verified
Journal Article
Open access
PDF file
Huaping WangHuaping Wang
Huaping Wang
YWYi-Bin Wu
Yi-Bin Wu
CCchen cong
chen cong
HZHuyuan ZHang
Huyuan ZHang
HJHao Jiang
Hao Jiang
XXXiangYang Xu
XiangYang Xu
The in-situ health condition of carbon fiber reinforced polymer (CFRP) reinforced structures has become an important topic, which can reflect the structural performance of the retrofitted structures and judge the design theory. An optical fiber-based structural health monitoring technique is thus suggested. To check the effectiveness of the proposed method, experimental testing on smart CFRP reinforced steel beams under impact action has been performed, and the dynamic response of the structure has been measured by the packaged FBG sensors attached to the surface of the beam and the FBG sensors inserted in the CFRP plates. Time and frequency domain analysis has been conducted to check the structural feature of the structures and the performance of the installed sensors. Results indicate that the packaged Fiber Bragg Grating (FBG) sensors show better sensing performance than the bare FBG sensors in perceiving the impact response of the beam. The sensors embedded in the CFRP plate show good measurement accuracy in sensing the external excitation and can replace the surface-attached FBG sensors. The dynamic performance of the reinforced structures subjected to the impact action can be straightforwardly read from the signals of FBG sensors. The larger impact energies bring about stronger impact signals.

8 September 2023 in Buildings
Verified
Journal Article
Open access
PDF file
CCchen cong
chen cong
Huaping WangHuaping Wang
Huaping Wang
JMJie Ma
Jie Ma
MWMaihemuti Wusiman
Maihemuti Wusiman
Carbon-fiber-reinforced polymer (CFRP) composites have many advantages, and have been widely used in aerospace structures, buildings, bridges, etc. The analysis of dynamic response characteristics of CFRP composite structures is of great significance for promoting the development of smart composite structures. For this reason, vibration experiments of CFRP laminates with surface-attached fiber Bragg grating (FBG) sensors under various dynamic loading conditions were carried out. Time- and frequency-domain analyses were conducted on the FBG testing signals to check the dynamic characteristics of the CFRP structure and the sensing performance of the installed sensors. The results show that the FBG sensors attached to the surface of the CFRP laminates can accurately measure the dynamic response and determine the excited position of the CFRP laminates, as well as invert the strain distribution of the CFRP laminates through the FBG sensors at different positions. By performing Fourier transform, short-time Fourier transform, and frequency domain decomposition (FDD) on the FBG sensing signals, the time–frequency information and the first eight modal frequencies of the excited CFRP structure can be obtained. The modal frequencies obtained by different excitation types are similar, which can be used for structural damage identification. The research in this paper clarifies the effectiveness and accuracy of FBG sensors in sensing the dynamic characteristics of CFRP structures, which can be used for performance evaluation of CFRP structures and will effectively promote the design and development of intelligent composite material structures.

22 July 2024 in Buildings
Verified
Journal Article
Open access
PDF file
CCchen cong
chen cong
CZCHAO ZHANG
CHAO ZHANG
JMJie Ma
Jie Ma
SHShi-Zhong He
Shi-Zhong He
JCJian Chen
Jian Chen
Huaping WangHuaping Wang
Huaping Wang
Carbon fiber-reinforced polymer (CFRP) components were extensively used and current studies mainly refer to CFRP laminates. The dynamic performance of the complicated CFRP antenna beams is yet to be explored. Therefore, a sensor layout based on fiber Bragg gratings (FBGs) in series was designed to measure the dynamic response of the CFRP antenna beam, and various vibration tests (sweep frequency test, simulated long-life vibration test, shock vibration test, functional vibration test, and constant frequency vibration test) were conducted. The time and frequency domain analysis on FBG sensing signals was performed to check the vibration performance and assess the health condition of this novel CFRP structure. The results indicate that strain values reach a maximum of only 300 µε under different test conditions. The antenna beam exhibited clear vibration patterns, with the first four intrinsic frequencies identified at 44, 94.87, 107.1, and 193.45 Hz. It shows that strain distribution and vibration modes of the antenna beam can be characterized from the sensing data, and the dynamic feature can be much more accurately assessed. The FBG sensors attached on the surface of CFRP antenna beam can accurately and stably measure the dynamic response, which validates that the interfaces between optical fiber sensing elements and CFRP material have excellent interfacial bonding characteristics. The novel CFRP antenna beam exhibits the excellent dynamic performance and stability, offering the replacement of traditional steel antenna beams. The study can finally instruct the development of self-sensing CFRP antenna beams assembled with FBGs in series.

1 January 2015
Verified
Conference Paper
Closed access
CCchen cong
chen cong
XLXilin Lu
Xilin Lu
This paper introduces the theory and design method of replaceable coupling beams on the basis of a real engineering project including five 29-storey residential buildings. Based on the original structure, several configurations of the replaceable dampers located in the center part of the replaceable coupling beams were designed. To study their inelastic seismic performance, full-scale low-cyclic loading tests were conducted in State Key Laboratory of Disaster Reduction in Civil Engineering at Tongji University, while finite element models were built using the general finite element program ABAQUS. The results of the experiments and analysis demonstrate the excellent energy dissipation capacities of the replaceable devices. Good correlations were achieved between the analytical and experimental results of the energy dissipation devices.