Melkamu Biyana Regasa

Mr. Melkamu Biyana Regasa

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 November 2022 in Applied Water Science
Verified
Journal Article
Open access
PDF file
AHAgesa Abdisa Hambisa
Agesa Abdisa Hambisa
MRMelkamu Biyana Regasa
Melkamu Biyana Regasa
HEHaile Gurmessa Ejigu
Haile Gurmessa Ejigu
CSChala Boru Senbeto
Chala Boru Senbeto
A low-cost locally available agricultural waste-based Anchote peel adsorbent was studied to remove the methyl orange (MO) dye from wastewater which was created at laboratory conditions. The adsorbent was characterized by Fourier infrared and x-ray powder diffraction spectroscopic techniques. The adsorption capacity of the proposed adsorbent was investigated using the batch adsorption method. The best performance was achieved after careful optimization of experimental parameters such as adsorbent dose (0.4 g), initial dye concentration (70 mg/L), contact time (140 min), pH of the solution (8.0), and temperature (40 °C), respectively. The removal of MO from water using anchote peel adsorbent achieved a removal efficiency of 94.47% following the pseudo-second-order kinetic model, Freundlich isotherm, and chemisorption mechanism, respectively. The adsorbent showed heterogeneous surfaces and the adsorption of MO was thermodynamically spontaneous. Furthermore, the present results reveal that Anchote peel adsorbent is promising in future for the removal of organic dyes and other contaminants like toxic heavy metals from water and wastewater.

18 February 2020 in ACS Omega
Verified
Journal Article
Open access
MRMelkamu Biyana Regasa
Melkamu Biyana Regasa
TSTesfaye Refera Soreta
Tesfaye Refera Soreta
OFOlu Emmanuel Femi
Olu Emmanuel Femi
PRPraveen C. Ramamurthy
Praveen C. Ramamurthy
Simple, fast, and sensitive molecularly imprinted composite thin-film-based electrochemical sensor developed by using in situ co-electropolymerization of aniline and acrylic acid in the presence of melamine as a template is described here. The prepolymerization complex formation was studied by using Fourier transform infrared (FTIR) spectrophotometry, while the film formation was performed and characterized by cyclic voltammetry, Fourier transform infrared (FTIR), and scanning electron microscopy (SEM). The optimization of important parameters and removal of melamine generated the binding sites in the polymer matrix, which can recognize melamine specifically. Electrochemical measurements were performed to achieve the linear range, the limit of quantification, and limit of detection of 0.1–180, 0.0573, and 0.0172 nM, respectively. The sensitivity of the sensor was attributed to the synergistic effects of amine from aniline and the carboxylic group from acrylic acid to form multiple noncovalent interactions with the template. Melamine-spiked infant formula and raw milk were analyzed by the developed sensor, and the recovery range of 95.87–105.63% with a relative standard deviation of 1.11–2.23% was obtained. The results showed that the developed sensor using the new composite polymer receptor is promising for the online monitoring of melamine in the food industries in the future.

15 May 2025 in Nanoscale Advances
Verified
Journal Article
Open access
PDF file
PKPraveen Kanti
Praveen Kanti
VWVignesh vicki Wanatasanappan
Vignesh vicki Wanatasanappan
AKAbhinav Kumar
Abhinav Kumar
MRMelkamu Biyana Regasa
Melkamu Biyana Regasa
Graphene is suitable for aerospace and space engineering because its single carbon layer exhibits excellent mechanical, electrical and thermal characteristics.

3 February 2020 in Journal of Molecular Recognition
Verified
Journal Article
Closed access
PDF file
MRMelkamu Biyana Regasa
Melkamu Biyana Regasa
TSTesfaye R. Soreta
Tesfaye R. Soreta
OFOlu E. Femi
Olu E. Femi
PRPraveen C. Ramamurthy
Praveen C. Ramamurthy
SKSaravana Kumar
Saravana Kumar


11 September 2024 in Composite Materials
Verified
Journal Article
Open access
PDF file
KMKasahun Tsegaye Mekonnen
Kasahun Tsegaye Mekonnen
GFGada Muleta Fanta
Gada Muleta Fanta
Birhanu Zeleke TilintiBirhanu Zeleke Tilinti
Birhanu Zeleke Tilinti
MRMelkamu Biyana Regasa
Melkamu Biyana Regasa
Three-dimensional (3D) printing technology facilitates the direct creation of intricate objects from computer-aided digital designs. This method offers an efficient means to integrate all essential components by leveraging biomaterials, advanced printing techniques, and innovative cell delivery methods. As 3D printing becomes increasingly prevalent in research, commercial, and domestic spheres, the demand for high-quality polymer filaments continues to rise. Biopolymers, which are widely accessible, low- or nontoxic, biodegradable, biocompatible, chemically versatile, and inherently useful, hold significant potential for diverse applications including biomedicine, food, textiles, and cosmetics. Recent studies have examined the 3D printing of polylactic acid (PLA) using biopolymers such as cellulose, lignin, chitosan, starch, collagen, and gelatin. These biodegradable composites outperform non-biodegradable counterparts in various applications, enhance the properties of PLA, and offer environmental benefits. Thus, a thorough understanding of the 3D printing process for these biocomposites is essential for their production. This review classifies PLA/biopolymer 3D printing materials, details the materials and processing technologies, and discusses their applications. Furthermore, it explores the roles and characteristics of specific filler materials in PLA-based biocomposites and their effects as fillers.