Vehicle traffic pollution requires complex physicochemical analysis besides emission level measuring. The current study is focused on two campaigns of emissions measurements held in May and September 2019 in Alba Iulia City, Romania. There was found a significant excess of PM_2.5 for all measuring points and PM₁₀ for the most circulated points during May, along with significant VOC and CO₂ emissions. September measurements reveal threshold excess for all PM along with increased values for VOC and CO₂ emissions. These are the consequences of the complex environmental interaction of the traffic. Street dust and air-suspended particle samples were collected and analyzed to evidence the PM_2.5 and PM₁₀ sources. Physicochemical investigation reveals highly mineralized particulate matter: PM_2.5 fractions within air-suspended particle samples predominantly contain Muscovite, Kaolinite, and traces of Quartz and Calcite, while PM₁₀ fractions within air-suspended particle samples predominantly contain Quartz and Calcite. These mineral fractions originate in street dust and are suspended in the atmosphere due to the vehicles’ circulation. A significant amount of soot was found as small micro-sized clusters in PM_2.5 and fine micro-spots attached over PM₁₀ particles, as observed by Mineralogical Optical Microscopy (MOM) and Fourier Transformed Infrared Spectroscopy (FTIR). GC-MS analysis found over 53 volatile compounds on the investigated floating particles that are related to the combustion gases, such as saturated alkanes, cycloalkanes, esters, and aromatic hydrocarbons. It proves a VOC contamination of the measured particulate matters that make them more hazardous for the health. Viable strategies for vehicle traffic-related pollutants mitigation would be reducing the street dust occurrence and usage of modern catalyst filters of the combustion gas exhausting system.

Groundwater contamination by nitrates (NO₃⁻) and nitrites (NO₂⁻) is an urgent problem in rural areas of Eastern Europe, with profound public health and sustainability implications. This paper presents an integrated assessment of groundwater vulnerability and water quality in rural wells in the Ceanu Mare commune, Cluj County, Romania—a representative area of the Northern Transylvania Basin, characterized by diverse geological structures, intensive agricultural activities, and incomplete public water infrastructure. This study combines detailed hydrochemical analyses, household-level studies, and geological context to identify and quantify key factors influencing nitrate and microbial contamination in rural wells, providing a comprehensive perspective on water quality challenges in the central part of Romania. This study adopts a multidisciplinary approach, integrating detailed geotechnical investigations conducted through four strategically located boreholes. These are complemented by extensive hydrogeological and lithological characterization, as well as rigorous chemical and microbiological analyses of nearby wells. The results reveal persistently elevated concentrations of NO₃⁻ and NO₂⁻, commonly associated with inadequate livestock waste management and the proximity of manure storage areas. Microbiological contamination was also frequent. In this study, the NO₃⁻ levels in well water ranged from 39.7 to 48 mg/L, reaching up to 96% of the EU/WHO threshold (50 mg/L), while the NO₂⁻ concentrations varied from 0.50 to 0.69 mg/L, exceeding the legal limit (0.5 mg/L) in 87% of the sampled wells. Ammonium (NH₄⁺) was detected (0.25–0.34 mg/L) in all the wells, below the maximum allowed limit (0.5 mg/L) but indicative of ongoing organic pollution. All the well water samples were non-compliant for microbiological parameters, with E. coli detected in 100% of cases (5–13 CFU/100 mL). The regional clay–marl substrate offers only limited natural protection against pollutant infiltration, primarily due to lithological heterogeneity and discontinuities observed within the clay–marl layers in the study area. This research delivers a replicable model for rural groundwater assessment and addresses a critical gap in regional and European water safety studies. It also provides actionable recommendations for sustainable groundwater management, infrastructure development, and community risk reduction in line with EU water directives.

Petroleum hydrocarbon pollution is a serious environmental and human health problem. In recent decades, the impact of this substance has been profound and persistent, affecting the balance of aquatic and terrestrial ecosystems and leading to significant physical and psychosocial effects among the population. Natural sources (crude oil, natural gas, forest fires, and volcanic eruptions) and anthropogenic (road traffic, smoking, pesticide use, oil drilling, underground water leaks, improper oil spills, industrial and mining waste water washing, etc.), the molar weight of the hydrocarbon, and the physicochemical properties are important factors in determining the degree of pollution. The effects of pollution on the environment consist of altering the fundamental structures for sustaining life (infertile lands, climate change, and loss of biodiversity). In terms of human health, diseases of the following systems occur: respiratory (asthma, bronchitis), cardiovascular (stroke, heart attack), pulmonary (infections, cancer), and premature death. To reduce contamination, sustainable intervention must be carried out in the early stages of the pollution-control process. These include physical techniques (isolation, soil vapor extraction, solvent extraction, soil washing), chemical techniques (dispersants–surfactants, chemical oxidation, solidification/stabilization, thermal desorption), biological techniques (bioremediation, phytoremediation), and indigenous absorbents (peat, straw, wood sawdust, natural zeolites, clays, hemp fibers, granular slag, Adabline II OS). Due to the significant environmental consequences, decisions regarding the treatment of contaminated sites should be made by environmental experts, who must consider factors such as treatment costs, environmental protection regulations, resource recovery, and social implications. Public awareness is also crucial, as citizens need to understand the severity of the issue. They must address the sources of pollution to develop sustainable solutions for ecosystem decontamination. By protecting the environment, we are also safeguarding human nature.

This study provides a comparative analysis of agricultural practices, water resource management, and environmental risks in two rural communes of Transylvania, Romania—Ceanu Mare (Cluj County) and Chețani (Mureș County). Data were collected in June 2025 through structured questionnaires administered to 430 households in Ceanu Mare and 184 households in Chețani, representing over 30% and 20% of the total households, respectively. The research examines the structure of agricultural activity, use of fertilizers and pesticides, irrigation methods, and the local perception of pollution and subsidy programs. Both communes exhibit small-scale, household-based agriculture, but notable differences exist: Ceanu Mare demonstrates higher use of chemical inputs and environmental awareness, while Chețani relies more on organic fertilizers and private wells for irrigation. In addition to survey-based data, the study incorporates direct chemical analysis of household well water, assessing concentrations of nitrate (NO₃⁻), nitrite (NO₂⁻), ammonium (NH₄⁺), and pH levels as indicators of groundwater quality and public health risk. The results reveal that NO₃⁻ remained below the 50 mg/L standard in all wells, while NO₂⁻ approached or slightly exceeded 0.50 mg/L in a few Ceanu Mare villages, underscoring the vulnerability of shallow wells to diffuse agricultural inputs and sanitation deficits. The study also characterizes the main agrochemical compounds used and discusses their potential impacts on water and soil quality, emphasizing nitrate leaching, phosphate runoff, and the persistence of pesticide residues as major risks. These findings underscore the necessity of integrated management strategies, regular monitoring of groundwater quality, and targeted policy interventions to ensure sustainable rural development and environmental protection in similar Central and Eastern European contexts.

Problem statement: Contaminated mixed plastic waste—bearing metallic, paper, cardboard and organic residues—remains largely excluded from mechanical recycling because conventional routes require a costly, water- and energy-intensive washing–drying pretreatment. Research gap: No published study combines a fully dry, washing-free valorisation route for such waste with certified mechanical characterisation and a quantified CO₂ mass balance that explicitly credits elimination of the washing–drying stage. Methodology: This study presents DMP (Downcycled Mixed Plastic), a patented (OSIM, Romania) dry valorisation process based on continuous single-screw extrusion (D = 150 mm, L/D = 17.3), characterised through differential scanning calorimetry (DSC), certified mechanical/thermal testing at accredited Romanian laboratories, Weber-number dispersion analysis, and a process-parameter sensitivity study. Key findings: The composite exhibits certified mechanical properties (tensile strength 9.22 MPa, elongation at break 112.8%, compressive strength 14.5 MPa); composition–property analysis across four batches shows that increasing the PP weight fraction from 20 to 28 wt% raises tensile strength by 8.3% while reducing elongation by 5.2%; a computed Weber number (We = 166.7 ≫ We_crit) is consistent with fine PP-phase dispersion within the PE matrix; the sensitivity study confirms statistically robust structure–property relationships (R² = 0.93–0.98); and the CO₂ mass balance establishes a net avoidance of 3.150 t CO₂ eq per tonne of waste processed relative to conventional wet recycling. Significance: dry, washing-free processing is a technically promising pathway for valorising plastic waste streams currently considered non-recyclable, potentially reducing production cost by 60–70% relative to wet recycling, pending additional characterisation identified as priorities for future work.

Accurate product information underpins consumer choice and the circular economy instruments of the Green Deal, yet the comparability of the evidence that national authorities publish on labeling non-conformity has rarely been examined. This study assesses publicly reported enforcement results from five EU Member States covering three levels of economic development (Romania, Germany, Poland, Croatia and Bulgaria), with a county-level case for Alba County, Romania. Each reported figure was coded by the unit inspected, denominator, product category, and design of the enforcement action. The reported values (67%, 23.9%, 19.8%, approximately 8.6%, 26.4% and 7.7 acts per 100 inspections) measure at least four different indicators and mostly come from targeted actions; expressed on a common basis, they do not support a convergent cross-country rate. None of the five data sets reported all elements of a proposed minimum reporting set (scores 1.5–3.5 of 5). The main finding is therefore that national systems report labeling non-conformity in non-comparable formats. Alba County ranked fifth of 42 county-level units by number of sanctions in 2025, but in the absence of inspection counts, no inference about enforcement intensity can be drawn. The paper proposes the reporting set and a literature-informed matrix linking non-conformity types to detection methods, and discusses, as an implication, why reliable composition data matter for textile recycling.