Multi-substituted hydroxyapatites (ms-HAPs) are currently gaining more consideration owing to their multifunctional properties and biomimetic structure, owning thus an enhanced biological potential in orthopaedic and dental applications. In this study, nano-hydroxyapatite (HAP) substituted with multiple cations (Sr ²⁺ , Mg ²⁺ and Zn ²⁺ ) for Ca ²⁺ and anion ( Si O 4 4 − ) for P O 4 3 − and OH ⁻ , specifically HAPc-5%Sr and HAPc-10%Sr (where HAPc is HAP-1.5%Mg–0.2%Zn–0.2%Si), both lyophilized non-calcined and lyophilized calcined, were evaluated for their in vitro ions release. These nanomaterials were characterized by scanning electron microscopy, field emission-scanning electron microscopy and energy-dispersive X-ray, as well as by atomic force microscope images and by surface specific areas and porosity. Further, the release of cations and of phosphate anions were assessed from nano-HAP and ms-HAPs, both in water and in simulated body fluid, in static and simulated dynamic conditions, using inductively coupled plasma optical emission spectrometry. The release profiles were analysed and the influence of experimental conditions was determined for each of the six nanomaterials and for various periods of time. The pH of the samples soaked in the immersion liquids was also measured. The ion release mechanism was theoretically investigated using the Korsmeyer–Peppas model. The results indicated a mechanism principally based on diffusion and dissolution, with possible contribution of ion exchange. The surface of ms-HAP nanoparticles is more susceptible to dissolution into immersion liquids owing to the lattice strain provoked by simultaneous multi-substitution in HAP structure. According to the findings, it is rational to suggest that both materials HAPc-5%Sr and HAPc-10%Sr are bioactive and can be potential candidates in bone tissue regeneration.

Vehicle traffic pollution requires complex physicochemical analysis besides emission level measuring. The current study is focused on two campaigns of emissions measurements held in May and September 2019 in Alba Iulia City, Romania. There was found a significant excess of PM_2.5 for all measuring points and PM₁₀ for the most circulated points during May, along with significant VOC and CO₂ emissions. September measurements reveal threshold excess for all PM along with increased values for VOC and CO₂ emissions. These are the consequences of the complex environmental interaction of the traffic. Street dust and air-suspended particle samples were collected and analyzed to evidence the PM_2.5 and PM₁₀ sources. Physicochemical investigation reveals highly mineralized particulate matter: PM_2.5 fractions within air-suspended particle samples predominantly contain Muscovite, Kaolinite, and traces of Quartz and Calcite, while PM₁₀ fractions within air-suspended particle samples predominantly contain Quartz and Calcite. These mineral fractions originate in street dust and are suspended in the atmosphere due to the vehicles’ circulation. A significant amount of soot was found as small micro-sized clusters in PM_2.5 and fine micro-spots attached over PM₁₀ particles, as observed by Mineralogical Optical Microscopy (MOM) and Fourier Transformed Infrared Spectroscopy (FTIR). GC-MS analysis found over 53 volatile compounds on the investigated floating particles that are related to the combustion gases, such as saturated alkanes, cycloalkanes, esters, and aromatic hydrocarbons. It proves a VOC contamination of the measured particulate matters that make them more hazardous for the health. Viable strategies for vehicle traffic-related pollutants mitigation would be reducing the street dust occurrence and usage of modern catalyst filters of the combustion gas exhausting system.

The present research is focused on the 3-Polker coins issued during 1619–1627 by Sigismund III Vasa, King of Poland. A major financial crisis took place at that time due to the 30-year War, which started in 1619. There are two theories among historians concerning the silver depreciation of these coins. The most common theory (generally accepted without proof) is that the later years of issue are depreciated below 60% Ag. The second theory is based on the medieval sources that indicate inflation during the years from 1621–1625, but the medieval source only refers to the inflation of the type of coins and does not mention the issuer. Therefore, in this study, we use modern investigation techniques and materials science methods to help historians elucidate the aforementioned aspects regarding the medieval period. The XRD investigation results are in good agreement with the SEM-EDX elemental analysis. The coins from 1619 and 1620 have high silver content, namely, 86.97% and 92.49%, which corresponds to good silver. The amount of Ag found in the coins from 1621–1625 issituated in the range of 63.2–74.6%. The silver titleis suddenly restored in 1626 at about 84.3% and is kept in a good range until the end of this decree under Sigismund III in 1627. In conclusion, the second theory was partly validated by our experimental results, certifying the currency depreciation during 1621–1625, but the silver title was not lower than 54.2%. Notably, even this depreciated silver title assures a good quality of the 3-Polker coins compared to similar coins issued in other countries that were copper–silver-plated. Therefore, the 3-Polker coins were preferably hoarded at that time.Small alterations in the mint mark’s design were observed in all the depreciated coins compared to the good ones. This might be a sign for an expert to identify the depreciated coins, a fact which requires supplementary investigations. The silver title’s restoration in 1626 also came with a complete change of the mintmark.

Petroleum hydrocarbon pollution is a serious environmental and human health problem. In recent decades, the impact of this substance has been profound and persistent, affecting the balance of aquatic and terrestrial ecosystems and leading to significant physical and psychosocial effects among the population. Natural sources (crude oil, natural gas, forest fires, and volcanic eruptions) and anthropogenic (road traffic, smoking, pesticide use, oil drilling, underground water leaks, improper oil spills, industrial and mining waste water washing, etc.), the molar weight of the hydrocarbon, and the physicochemical properties are important factors in determining the degree of pollution. The effects of pollution on the environment consist of altering the fundamental structures for sustaining life (infertile lands, climate change, and loss of biodiversity). In terms of human health, diseases of the following systems occur: respiratory (asthma, bronchitis), cardiovascular (stroke, heart attack), pulmonary (infections, cancer), and premature death. To reduce contamination, sustainable intervention must be carried out in the early stages of the pollution-control process. These include physical techniques (isolation, soil vapor extraction, solvent extraction, soil washing), chemical techniques (dispersants–surfactants, chemical oxidation, solidification/stabilization, thermal desorption), biological techniques (bioremediation, phytoremediation), and indigenous absorbents (peat, straw, wood sawdust, natural zeolites, clays, hemp fibers, granular slag, Adabline II OS). Due to the significant environmental consequences, decisions regarding the treatment of contaminated sites should be made by environmental experts, who must consider factors such as treatment costs, environmental protection regulations, resource recovery, and social implications. Public awareness is also crucial, as citizens need to understand the severity of the issue. They must address the sources of pollution to develop sustainable solutions for ecosystem decontamination. By protecting the environment, we are also safeguarding human nature.

Several forged 3-Polker coins have been reported in historical sources on the financial crisis that occurred between 1619 and 1623 at the start of the 30-year-long war. Supposedly, belligerent countries forged other countries’ coins which were then used for external payments as a war strategy. Thus, a lot of 3-Polker coins (e.g., Sigismund-III-type) were forged, and the markets became flooded with poor currency. In the present day, these pre-modern forgeries are rare archeological findings. Only five forged 3-Polker coins randomly found in Transylvania were available for the current study. There are deeper implications of silver and tin in the forgery techniques that need to be considered. Thus, the forged 3-Polker coins were investigated via nondestructive methods: SEM microscopy coupled with EDS elemental spectroscopy for complex microstructural characterization and XRD for phase identification. Three distinct types of forgery methods were identified: the amalgam method is the first used for copper blank silvering (1620), and immersion in melted silver (1621) is the second one. Both methods were used to forge coins with proper legends and inscriptions. The third method is the tin plating of copper coins (with corrupted legend and altered design) (1622, 1623, and 1624). The EDS investigation revealed Hg traces inside the compact silver crusts for the first type and the elongated silver crystallites in the immersion direction, which are well-attached to the copper core for the second type. The third forgery type has a rich tin plating with the superficial formation of Cu₆Sn₅ compound that assures a good resistance of the coating layer. Therefore, this type should have been easily recognized as fake by traders, while the first two types require proper weighing and margin clipping to ensure their quality.

Uniform filler distribution in composites is an important requirement. Therefore, BaO glass, nano hydroxyapatite and quartz filler distribution was realized through PCL microcapsules which progressively release filler during matrix polymerization. Two composites were realized based on a complex matrix containing BisGMA, UDMA, HEMA and PEG400 mixed with a previously described mineral filler: 33% for C1 and 31% for C2. The spreading efficiency was observed via SEM, revealing a complete disintegration of the microcapsules during C1 polymerization, while C2 preserved some microcapsule parts that were well embedded into the matrix beside BaO filler particles; this was confirmed by means of the EDS spectra. Mesenchymal stem cells of palatal origin were cultured on the composites for 1, 3, 5 and 7 days. The alkaline phosphatase (ALP) level was measured at each time interval and the cytotoxicity was tested after 3, 5 and 7 days of co-culture on the composite samples. The SEM investigation showed that both composites allowed for robust proliferation of the cells. The MSC cell pluripotency stage was observed from 1 to 3 days with an average level of ALP of 209.2 u/L for C1 and 193.0 u/L for C2 as well as a spindle cell morphology. Cell differentiation occurred after 5 and 7 days of culture, implied by morphological changes such as flattened, star and rounded shapes, observed via SEM, which were correlated with an increased ALP level (279.4 u/L for C1 and 284.3 u/L for C2). The EDX spectra after 7 days of co-culture revealed increasing amounts of P and Ca close to the hydroxyapatite stoichiometry, indicating the stimulation of the osteoinductive behavior of MSCs by C1 and C2. The MTT assay test showed a cell viability of 98.08% for C1 and 97.33% for C2 after 3 days, proving the increased biocompatibility of the composite samples. The cell viability slightly decreased at 5 and 7 days but the results were still excellent: 89.5% for C1 and 87.3% for C2. Thus, both C1 and C2 are suitable for further in vivo testing.