Zhou Huang

Mr. Zhou Huang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 November 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZHZhou Huang
Zhou Huang
Xianjie ShiXianjie Shi
Xianjie Shi
DMDong Mu
Dong Mu
XHXin Huang
Xin Huang
WTWeihao Tong
Weihao Tong
This paper thoroughly investigates the performance and multi-parameter optimization of a dual-stage vibration isolation system with bio-inspired isolators (BI-DSVI) under different base excitations. The dynamic equations of the BI-DSVI are derived. Then, the optimization problem is defined, where three types of base excitation (translation and rotations around the two horizontal axes) are studied. The optimization results show that the vibration transmissibility can be greatly reduced (more than 30 dB) by multi-parameter optimization, and an optimal configuration of structural parameters exists for the bio-inspired isolators. The effective vibration isolation bandwidth is significantly widened. Finally, the paper thoroughly discusses the influence of the structural parameters of the bio-inspired isolators and the base excitation types on the vibration isolation performance. The parameter studies provide useful guidelines for the application of the bio-inspired isolator in dual-stage vibration isolation.

2 December 2022 in Mathematics
Verified
Journal Article
Open access
PDF file
ZHZhou Huang
Zhou Huang
YLYong Liu
Yong Liu
XHXin Huang
Xin Huang
DMDong Mu
Dong Mu
This work studied the lightweight design of an aircraft support based on lattice-filled structures. Different from the traditional design process of lattice-filled structures, this work combined several approaches, including topology optimization, homogenization analysis, and Non-Uniform Rational B-splines (NURBS) surface modeling, to reduce the structural weight more effectively. The theories and implementations involved in the design process are introduced in this work. The new lattice-filled design of the aircraft support component reduced the weight by 40% compared with the original value, and its additive manufacturability was verified. Finally, the structural responses of the lattice-filled design from both a detailed model and homogenization model were determined and compared, considering both the static responses and dynamic characteristics. The results revealed that the homogenization method efficiently and accurately obtained the structural displacements and natural frequencies of the complex lattice-filled design. This indicates that the homogenization method can effectively reduce the calculation burden of the design process of lattice-filled structures, which opens a new channel for the structural optimizations of lattice-filled structures.

19 May 2023 in Journal of Tribology
Verified
Journal Article
Closed access
PDF file
YBYonggang Bai
Yonggang Bai
ZHZhou Huang
Zhou Huang
Xianjie ShiXianjie Shi
Xianjie Shi
ZGZhuotao Guo
Zhuotao Guo
ZHZihao Huang
Zihao Huang
ZRZhiying Ren
Zhiying Ren
Metal rubber (MR) is a kind of elastic porous material with a complex and disordered internal structure, which results in wear characteristics that can only rely on tests but cannot meet the engineering application. This paper presents an exciting method for studying wear characteristics based on its virtual fabrication technology. By developing the intricate internal multipoint random contact mesh model of MR, a virtual real-time dynamic tracking contact point in a different state is captured. A thorough investigation is conducted into the contact point properties, point distribution, and the interaction of discrete contact points in MR interior space. Accordingly, a cross-scale micro-motion wear study method from micromorphology to macroscopic performance is proposed. The continuous wear cycle of MR is discretized into multiple single-turn metal wire elements by applying the principle of equal spacing. A statistical model of internal contact point wear of MR at the microlayer is developed considering the metal wire’s single-turn fretting wear prediction model. The cumulative prediction model of macroscopic wear damage of MR is based on the superposition of micro-element interval. Finally, the difference between the mass loss and that obtained from the simulation analysis after performing dynamic loading tests at different cycles was studied and found to be insignificant.

2 December 2025 in Machines
Verified
Journal Article
Open access
PDF file
DCDekun Chen
Dekun Chen
JFJia Feng
Jia Feng
NHNaidan Hou
Naidan Hou
ZHZhou Huang
Zhou Huang
The construction of a high-order shape function is a key and difficulty for unstructured grid mesh and sliding boundary problems. In this paper, a construction method of space-time absolute nodal coordinate formulation quadrilateral cable (SACQ) is proposed, and the accuracy of the SACQ element is studied and verified with three different applications. First, the shape function of SACQ is constructed with spatiotemporal reduction coordinates, and the action integral of SACQ is composed with the Lagrangian function and discrete with perspective transformation. Second, the numerical convergence region is discussed and determined with the Courant number. Furthermore, a space-time nodal dislocation and its relation with the Courant number are studied. The simulation and verification are focusing on some realistic problems. Finally, a one-sided impact, a free-flexible pendulum, a taut string with a sliding boundary and a deployable guyed mast under an impact transverse wave are simulated. In these problems, an unstructured grid meshed with SACQ has similar energy convergence and accuracy to a structured grid but shows better efficiency.

1 September 2025 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
ZWZhiyang Wang
Zhiyang Wang
YDYan Dong
Yan Dong
ZHZhou Huang
Zhou Huang
XSXianjie Shi
Xianjie Shi
Truss lattice, as a representative lightweight porous material, provides significant advantages, including high design freedom, low weight, and superior specific strength/stiffness. However, research into their mechanical properties has primarily focused on uniaxial compression and tension due to their multiscale characteristics, with limited data available for out-of-plane loading conditions such as bending and shear. This study focuses on Body-Centered Cubic (BCC) lattice structures. Two groups of specimens with typical parameters were designed, along with dedicated experimental setups. A modified beam element-based method was employed for mechanical equivalent modeling of the lattice structures. The mechanical behavior under tension, compression, bending, and shear loads was investigated through a combination of numerical simulation and specialized experimental testing. Both experimental data and numerical results indicate that the lattice structures exhibit anisotropic properties, with tensile strength lower than compressive strength. Bending and shear strengths were observed not to exceed 2.1 MPa. The adopted mechanical equivalent modeling method effectively captures the mechanical characteristics of the lattice.