Dong Mu

Mr. Dong Mu


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 November 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZHZhou Huang
Zhou Huang
Xianjie ShiXianjie Shi
Xianjie Shi
DMDong Mu
Dong Mu
XHXin Huang
Xin Huang
WTWeihao Tong
Weihao Tong
This paper thoroughly investigates the performance and multi-parameter optimization of a dual-stage vibration isolation system with bio-inspired isolators (BI-DSVI) under different base excitations. The dynamic equations of the BI-DSVI are derived. Then, the optimization problem is defined, where three types of base excitation (translation and rotations around the two horizontal axes) are studied. The optimization results show that the vibration transmissibility can be greatly reduced (more than 30 dB) by multi-parameter optimization, and an optimal configuration of structural parameters exists for the bio-inspired isolators. The effective vibration isolation bandwidth is significantly widened. Finally, the paper thoroughly discusses the influence of the structural parameters of the bio-inspired isolators and the base excitation types on the vibration isolation performance. The parameter studies provide useful guidelines for the application of the bio-inspired isolator in dual-stage vibration isolation.

2 December 2022 in Mathematics
Verified
Journal Article
Open access
PDF file
ZHZhou Huang
Zhou Huang
YLYong Liu
Yong Liu
XHXin Huang
Xin Huang
DMDong Mu
Dong Mu
This work studied the lightweight design of an aircraft support based on lattice-filled structures. Different from the traditional design process of lattice-filled structures, this work combined several approaches, including topology optimization, homogenization analysis, and Non-Uniform Rational B-splines (NURBS) surface modeling, to reduce the structural weight more effectively. The theories and implementations involved in the design process are introduced in this work. The new lattice-filled design of the aircraft support component reduced the weight by 40% compared with the original value, and its additive manufacturability was verified. Finally, the structural responses of the lattice-filled design from both a detailed model and homogenization model were determined and compared, considering both the static responses and dynamic characteristics. The results revealed that the homogenization method efficiently and accurately obtained the structural displacements and natural frequencies of the complex lattice-filled design. This indicates that the homogenization method can effectively reduce the calculation burden of the design process of lattice-filled structures, which opens a new channel for the structural optimizations of lattice-filled structures.

29 April 2026 in Materials
Verified
Journal Article
Open access
PDF file
ZHZhou Huang
Zhou Huang
YLYong Liu
Yong Liu
JLJunwei Liu
Junwei Liu
DMDong Mu
Dong Mu
Truss-like and minimal surface-based cells are among the promising candidates for novel impact-resistant structural designs. However, the influence of cell configurations on impact resistance performance remains unclear. In this paper, the energy absorption characteristics of three truss-like cells (BCC, Fluorite, and Diamond) and three minimal surface cells (Gyroid, Primitive, Diamond) are systematically compared using quasi-static compression experiments and refined numerical models. Experimental results indicate that minimal surface cells possess clearly superior specific energy absorption performance. Specifically, the Gyroid (G-surface) exhibits a specific energy absorption (25 kJ/kg) approximately 2.3 times greater than the highest value among truss-like cells (11 kJ/kg), accompanied by an extended plateau strain by about 20%. Additionally, due to stress concentration at joints, truss-like cells show notably lower plateau forces compared to minimal surface cells. However, truss-like cells demonstrate better manufacturing precision and quality control, as evidenced by a relatively small average weight deviation (about 1.2%). Furthermore, numerical simulations were conducted to explore differences in deformation mechanisms between two representative cells. Results reveal that the BCC structure absorbs energy through localized shear band formation induced by point plastic hinges, whereas the Primitive (P-surface) minimal surface structure achieves more uniform plastic deformation via distributed line plastic hinges. Finally, impact simulations of protective structures show that the maximum stress in the P-surface-filled structure is reduced by 4.6% compared to the BCC-filled structure, and stress distribution uniformity is improved by 37%. The findings from this study provide valuable references and data support for future anti-impact structural designs.

1 July 2020 in Journal of Loss Prevention in the Process Industries
Verified
Journal Article
Closed access
DMDong Mu
Dong Mu
SWSong Wu
Song Wu
FZFei Zeng
Fei Zeng
FWFengjun Wang
Fengjun Wang
XHXin Huang
Xin Huang