The corrosion diagnosis of grounding grid can locate the corroded branches and provide guidance for the maintenance and repair of the grounding grid. This paper proposed the electrical impedance tomography (EIT) method on the corrosion diagnosis of grounding grid and described how it works. Firstly, the inverse problem model of the electrical impedance tomography on grounding grid is developed. Secondly, in order to weaken the ill-posedness of the inverse problem, a Newton iterative algorithm with Tikhonov regularization is proposed to solve the problem. Then, due to the high resistivity contrast between the soli and steel and the large size of imaging region, this paper presents the method of soil-separation and block-diagnosis to accomplish these problems. Finally, field experiments were carried out to verify the effectiveness of the proposed method and the results show that the location and degree of the corrosion in the grounding grid can be easily judged from the imaging results.

Ultra-high frequency (UHF) electromagnetic (EM) signals generated by the partial discharge (PD) process of high-voltage equipment are now widely used in PD detection. The computation of EM propagation generated by a local discharge source using a uniformly hardwiring source can hardly reveal the discharge characteristics. In this paper, a method of near-field to far-field transformation is proposed to realize the study of the propagation characteristics of the PD signal. A short gap discharge model is established to get the near-field electromagnetics and the proposed method is validated by comparing the directly calculated results with the results of the near-field source. In the end, a model of switchgear is employed to study the propagation characteristics of the EM signal based on the proposed method. Via numerical calculation, the influence of the equipment in the switchgear on the propagation of the discharge EM is studied. It is found that the direction of the discharge source has a significant effect on the distribution of the electric field, which indicates that the discharge source cannot be simplified to a uniformly hardwiring source. In addition, it is also obtained that the amplitude of the electric field shows the same trend with the growth of the discharge channel, which gives a method for evaluating the development of the PD. Particularly, the near-field to far-field transformation can provide an effective method for studying the propagation of discharge EM waves in large-scale equipment.