Polarization volume gratings (PVGs) have been recognized as a groundbreaking technology with the potential to revolutionize holographic waveguides and facilitate immersive experiences in augmented and virtual reality (AR/VR) applications. This study investigated the design, fabrication, and utilization of PVGs within the framework of holographic waveguides for immersive encounters. The essay begins by presenting a comprehensive overview of waveguide technologies. The display devices and optical combiners combine the actual and virtual worlds that the naked eye can see. This review categorizes current visual solutions for micro-optical combiners in augmented reality head-mounted displays (AR-HMDs). Subsequently, an investigation was carried out into the manufacturing process, physical principles, optical structures, performance characteristics, and other aspects. Furthermore, a review and assessment of their merits and drawbacks were conducted.
21 February 2025 in Journal of Materials Science: Materials in Engineering
This paper presents an innovative approach to fabricating dual-functional hybrid silicon nanowire (SiNW) arrays that demonstrate antireflection and Surface-Enhanced Raman Scattering (SERS) potentials. Three-beam laser interference lithography (TBLIL) is used to create interference fringe patterns on a Si substrate, which serves as a template for subsequent NWs creation. Subsequently, metal-assisted chemical etching (MACE) selectively etched the substrate and stimulated the formation of SiNWs with various aspect ratios. The morphological and optical features of the hybrid SiNWs were characterized by scanning electron microscopy (SEM), finite difference time domain (FDTD), and Raman spectroscopy. The resulting structured surface morphology effectively reduced the reflection losses at various wavelengths. The Raman spectra of rhodamine 6G (R6G) analytes at concentrations of 10–4 to 10–8 are examined, indicating that the Raman signals were significantly enhanced and had long-term stability and reliability. The Raman characteristic peaks of R6G were observed at 620, 1361, and 1660 cm−1, which are potentially useful in sensitive chemical sensors.
The development of tunable optical filters in the mid-infrared (MIR) region is crucial for a variety of applications, including environmental monitoring, medical diagnostics, and communication systems. This paper presents the design, fabrication, and characterization of a novel Twisted Liquid Crystal (TLC) electro-tunable optical cavity filter for the MIR region 3–5 μm. The filter is based on a Fabry–Perot interferometer configuration, which includes a polarization-independent TLC to achieve electrical control over the filter’s transmission characteristics. Two distinct filters were fabricated, differing in their substrate materials: silicon and glass. The silicon-based filter demonstrated an impressive 80% transmission with a tuning range of ∼13.6 nm and ∼14.64 nm in two separate bands, achieved by varying the applied voltage from 0 to 20 V. In contrast, the glass substrate filter exhibited a slightly higher transmission of 82% with tuning ranges of ∼10.5 nm and ∼7.2 nm across the spectral band when the voltage was adjusted from 0 to 27 V. Experimental validation showed a strong alignment between the simulations and results, demonstrating the feasibility of integrating tunable liquid crystals into mid-infrared optical cavities. This advancement highlights their potential for applications that require precise and dynamic control of the mid-infrared spectrum.