Due to their unique chemical structure, MXenes have been recognized as a potential material, having a high surface area, high thermal and electrical conductivity, and a tunable band gap, showing great hydrophilicity and stability. The adsorption and reducing properties of MXene-based 2D nanomaterials make them efficient photocatalysts for degrading organic pollutants. Silver nanoparticles were synthesized over the exfoliated MXene sheets (1:50 and 1:20 by weight to silver salt) using polyvinyl pyrrolidone as a dispersant. The elemental composition and morphology of the nanocatalysts Ag20@Ti3C2Tx and Ag50@Ti3C2Tx were analyzed by X-ray diffraction (XRD) analysis, X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray (EDX) spectroscopy, and field-emission scanning electron microscopy (FESEM). FESEM micrographs reveal porous exfoliated Ti3C2Tx sheets obtained by continuously stirring Ti3AlC2 for 44 h at 60 °C, providing a platform for the growth of Ag nanoparticles. Diffused reflectance spectroscopy (DRS) indicates that the bare silver nanoparticles show a decrease in the band gap value from 2.4 to 1.35 and 1.41 eV in Ag50@Ti3C2Tx and Ag20@Ti3C2Tx, respectively, which enables the nanocomposites to show excellent catalytic performance and degrade around 99% of safranin dye within 15 min at a concentration of 5 mg Ag50@Ti3C2Tx.
1 March 2017 in International Journal of Electrochemical Science
We present here surfactant modification of silver nanoparticles ink and its effects on quality as well as the electrical properties of the Ink-Jet printed electrodes. The substrate cleaning methods, annealing temperatures and surfactant concentrations have been thoroughly studied for better quality printing. Plasma cleaning method of substrate provided a better surface for inkjet printing with better adhesion of the ink on substrate surface. Silver nanoparticle based ink has been modified with different concentrations of 0.01%–1% surfactant (Hexadecylamine), among which 0.25% concentration has showed the best results and considerably improved the quality of the printed electrodes. Further the effect of annealing temperature was studied between 100–400 °C. Coarsening of silver nanoparticles has been observed which led to breaking of film at temperatures higher than 300 °C, proving 300 °C to be most suitable annealing temperature. Self-organization technique has been adopted in which a second electrode follows the first electrode by 4.5 μm reproducible gap in result of the creation of hydrophobic boundary around the printed electrodes due to the presence of surfactant (Hexadeclamine) in the ink.
16 May 2026 in Journal of Alloys and Compounds Communications