Objectives: To evaluate the clinical performance of self-assembling peptides versus fluoride-based delivery systems in post-orthodontic white spot lesions. Materials and methods: The participants were randomly assigned into two groups (n = 58) according to the remineralizing agent used, where (A) group represented participants receiving a varnish containing 22.600 fluoride ppm and tricalcium phosphate, while the second group (B) represented participants receiving self-assembling peptide. The remineralizing process of the white spot lesion was assessed using the DIAGNOdent pen and ICDAS scoring system according to the time when the remineralizing agent was used (T), where T0 represented the score taken at baseline. T1 represented the score taken after 3 months of follow-ups and T2 score represented the score taken after 6 months of follow-up. Data were collected and statistically analyzed. The parametric data: two-way ANOVA was used to test the effect of interaction among different variables. The non-parametric data: Mann–Whitney test was used. The significance level was set at p ≤ 0.05. Results: There was a quantitative statistically significant difference via DIAGNOpen readings between Group A (fluoride material) and Group B (self-assembling peptides). The highest mean value of 10.51 was found in Group A, while the least mean value of 6.45 was found in Group B. Besides, there was a significant difference in each group concerning the time factors T0, T1, and T2 groups where (p < 0.001. As for the qualitative results concerning the ICDAS score, there was no significant difference between the two groups along with the follow-up periods T0, T1, and T2 where the p value is equal to 0.064, 0.087, and 0.277 respectively. Conclusions: The visual assessment using ICDAS reveals that the biomimetic remineralization using self-assembling peptides and the fluoride-based varnish material showed a similar effect in masking post-orthodontic white spot lesions. However, the laser fluorescence using DIAGNOpen showed that the self-assembling peptides reveal higher performance in subsurface remineralization than the fluoride-based varnish material. Therefore, self-assembling peptides are considered a promising material for lesion regression in post-orthodontics white spot lesions. Clinical relevance: Self-assembling peptide SAP-14 is a new approach to reverse and mask off post-orthodontics white spot lesions.

Background: Machine learning (ML) through artificial intelligence (AI) could provide clinicians and oral pathologists to advance diagnostic problems in the field of potentially malignant lesions, oral cancer, periodontal diseases, salivary gland disease, oral infections, immune-mediated disease, and others. AI can detect micro-features beyond human eyes and provide solution in critical diagnostic cases. Objective: The objective of this study was developing a software with all needed feeding data to act as AI-based program to diagnose oral diseases. So our research question was: Can we develop a Computer-Aided Software for accurate diagnosis of oral diseases based on clinical and histopathological data inputs? Method: The study sample included clinical images, patient symptoms, radiographic images, histopathological images and texts for the oral diseases of interest in the current study (premalignant lesions, oral cancer, salivary gland neoplasms, immune mediated oral mucosal lesions, oral reactive lesions) total oral diseases enrolled in this study was 28 diseases retrieved from the archives of oral maxillofacial pathology department. Total 11,200 texts and 3000 images (2800 images were used for training data to the program and 100 images were used as test data to the program and 100 cases for calculating accuracy, sensitivity& specificity). Results: The correct diagnosis rates for group 1 (software users), group 2 (microscopic users) and group 3 (hybrid) were 87%, 90.6, 95% respectively. The reliability for inter-observer value was done by calculating Cronbach’s alpha and interclass correlation coefficient. The test revealed for group 1, 2 and 3 the following values respectively 0.934, 0.712 & 0.703. All groups showed acceptable reliability especially for Diagnosis Oral Diseases Software (DODS) that revealed higher reliability value than other groups. However, The accuracy, sensitivity & specificity of this software was lower than those of oral pathologists (master’s degree). Conclusion: The correct diagnosis rate of DODS was comparable to oral pathologists using standard microscopic examination. The DODS program could be utilized as diagnostic guidance tool with high reliability & accuracy.

The restoration durability is essentially governed by optimum marginal integrity of an indirect restoration that is obtained and maintained by essential factors. This study aimed to evaluate the internal gap of indirect restorations fabricated from CAD/CAM composite blocks versus ceramic blocks in badly broken teeth using cone beam CT (CBCT) to determine their internal fit accuracy over the cast. Fifty-four participants were allocated into two groups: composite blocks or ceramic blocks. The trial participants and assessors were blinded to the material assignment, whereas the operator was not. Cavity preparation was performed followed by cavity optimization and impression taking. The produced master cast was scanned, restoration was designed using Exocad 2019 software and the final restoration was milled. The restoration was doubled-checked on the cast for internal fit using cone beam computed tomography (CBCT), and intraorally for interproximal contact and marginal adaptation before final cementation. CBCT measurements were collected and statistically analyzed. Restoration was cemented with resin cement and was immediately assessed clinically, then after one year and two years of follow-up periods. Results of an independent t-test revealed Composite blocks samples (0.25mm ± 0.03) to have a significantly better adaptation than ceramic blocks samples (0.29 mm ± 0.04) (p = 0.008). Both materials have acceptable internal adaptation with a noticed difference reflected in their clinical performance. Both indirect esthetic CAD/CAM restorations exhibit acceptable internal and marginal adaptation in posterior teeth however, composite blocks have a better adaptation than ceramic blocks. This trial was registered in clinicaltrials.gov (NCT04784676).

Development of nanostructured biodegradable alloys has generated a great deal of interest in the recent years as they offer promising bioactive materials for reconstruction of bony defects following traumatic fractures or surgical excision of tumors. The aim of the current study was to investigate the biocompatibility of Iron–Manganese -based alloys (Fe–Mn) with addition of copper (Cu), Tungsten (W) and cobalt (Co) to obtain 3 different alloys namely, Fe–Mn–Cu, Fe–Mn–W, and Fe–Mn–Co on normal oral epithelial cell line,and their possible anticancer effect on MG-63: osteosarcoma cell line. The sulforhodamine B (SRB) assay was used to assess cell viability percentage of both cell lines after exposure to discs of the proposed experimental alloys. Moreover, the antibacterial effect of such alloys against Escherichia coli (E. coli) was tested using disc diffusion susceptibility (Kirby-Bauer method) and colony suspension method. The cell viability percentage of oral epithelial cell line showed a significant increase in all the experimental groups in comparison to the control group. The highest percentage was observed in Fe–Mn–Co group, followed by Fe–Mn–W then Fe–Mn–Cu, at 24 and 72-h intervals, respectively. While the cell viability percentage of osteosarcoma cell line showed significant increase in all the experimental groups at 24-h intervals, it showed a significant drop in all the study groups at 72-h intervals. The lowest percentage was observed in Fe–Mn–Cu group, followed by Fe–Mn–W then Fe–Mn–Co. Moreover, all the examined study groups didn't show any inhibition zones against E. coli reference culture. The novel nanostructured biodegradable Fe–Mn–Cu, Fe–Mn–W, and Fe–Mn–Co metal alloys exhibit good biocompatibility on oral epithelial cell lines with the enhancement of cell proliferation in a time-dependent manner that favors bone regeneration. On the other hand, all the alloys manifested possible anticancer activity against MG-63: osteosarcoma cell line. Furthermore, our study sheds the light on the importance of Co, W and Cu as promising alloying elements. However, the antibacterial activity of the examined alloys is still questionable. The novel nanostructured biodegradable Fe–Mn–Cu, Fe–Mn–W, and Fe–Mn–Co metal alloys offer promising bioactive materials for reconstruction of bony defects following traumatic fractures or surgical excision of tumors, In addition, they could be excellent alternatives for undegradable or non-resorbable alloys that are commonly used. Moreover, they could be used as beneficial 3D printing materials to obtain patient-specific medical implants that favor bone regeneration in addition to manufacturing of plates and screws suitable for fracture fixation.

Background: Tooth wear can have a multifactorial aetiology which requires thorough patient assessment and aesthetic management. Purpose: This case report discusses the management of a young, Egyptian swimmer complaining of tooth sensitivity associated with erosive tooth wear. Anterior teeth were restored using the injection molding technique, also known as the injectable composite resin technique, to overcome the patient's complaint and enhance the aesthetics of compromised anterior teeth. Patients and Methods: Thorough patient assessment was followed by impression taking, a diagnostic wax-up and intraoral mock-up fabrication for aesthetic, functional and biological verification. Upon the patient's agreement on the proposed treatment, an injection molding technique was carried out. Conclusion: The tooth loss pattern associated with erosive tooth wear in competitive swimmers showed a very characteristic presentation. Detailed patient history is imperative for successful assessment of the risk factors contributing to the condition and treatment planning in such cases. The use of injection molding technique for restoration of anterior teeth is a simple, straightforward and aesthetically pleasing alternative for patients with erosive tooth wear requiring direct composite veneers.

This study was conducted to evaluate the marginal adaptation, marginal staining, and postoperative sensitivity of resin composite restorations after disinfection of class II cavities with NanoCare Gold and chlorhexidine in class II cavities immediately, after 6 months, 1, and 2 years using World Dental Federation (FDI) criteria for assessment of dental restorations. In this study, 19 participants were recruited, 3 carious lesions in each one. After preparation of these lesions, they were randomly allocated into three parallel groups according to the disinfection protocol. The first group was for NanoCare Gold, the second was for chlorhexidine, and the third was for the control. The three groups were evaluated clinically and radiographically using (FDI) criteria at different intervals till 2 years of clinical service. There was no statistically significant difference in age, gender, arch, and tooth type distribution among study groups. Regarding marginal adaptation, there was no statistically significant difference among the different groups but the difference was only statistically significant within each group after 2 years. Regarding the marginal staining, the difference was only significant between the NanoCare and the other groups after 2 years. In case of postoperative sensitivity, there was no statistically significant difference among the different groups and within each one at different intervals. NanoCare Gold could be promising in durability preservation of direct tooth-colored restorations. Marginal staining and postoperative sensitivity are regulated by other factors than surface pretreatment. As long as restorations are inserted under rubber dam isolation, proper application steps, proper filling, and adequate finishing and polishing, the performance of the restorations would be satisfactory up to 1 year without any surface disinfection. However, after a longer follow-up, some changes may be noticed. NanoCare Gold and chlorhexidine are accepted as a cavity disinfectant without any negative effect on marginal adaptation of resin composite restorations.