The mechanisms causing the reduction in lattice thermal conductivity in highly P- and B-doped Si are looked into in detail. Scattering rates of phonons by point defects, as well as by electrons, are calculated from first principles. Lattice thermal conductivities are calculated considering these scattering mechanisms both individually and together. It is found that at low carrier concentrations and temperatures phonon scattering by electrons is dominant and can reproduce the experimental thermal conductivity reduction. However, at higher doping concentrations the scattering rates of phonons by point defects dominate the ones by electrons except for the lowest phonon frequencies. Consequently, phonon scattering by point defects contributes substantially to the thermal conductivity reduction in Si at defect concentrations above 1019 cm−3 even at room temperature. Only when, phonon scattering by both point defects and electrons are taken into account, excellent agreement is obtained with the experimental values at all temperatures.
The studies of the dimensional effect on the charge density wave (CDW) transition have attracted a lot of attention since the rise of 2D materials. In this paper, we synthesize high-quality single-crystal GdTe3, a member of the layered rare-earth metal tritelluride family with CDW transitions, and systematically study the temperature-dependent Raman spectra of bulk and few-layer GdTe3. Combining with first-principle calculations, the CDW and phonon Raman peaks are distinguished and characterized. We demonstrate that the CDW order can be enhanced in few-layer GdTe3, and the CDW transition temperature increases from 377 K to 431 K as the thickness reduces from the bulk to 10 nm. We speculate that this enhancement of the CDW order in the GdTe3 thin layer is likely due to the chemical pressure release. Our studies demonstrate that the dimensionality provides a valuable tuning parameter for manipulating the CDW properties of GdTe3.
In polar compounds, Fröhlich interaction plays an important role in electrical transport, and it is highly dependent on the dimensionality. In two-dimensional (2D) materials, Fröhlich interaction cannot be correctly described by the analytical model available for bulk materials, which prevents the employment of the state-of-the-art first-principles calculation of electrical transport based on maximally localized Wannier functions interpolation. Recently, an approximate 2D Fröhlich model with screened dielectric properties is proposed. Selecting the strong polar material of monolayer InSe, we examine the accuracy of this 2D Fröhlich model by comparing the electron mobility calculated using this model with that based on direct density functional perturbation theory calculations of 2D Fröhlich interaction. It is found that the 2D Fröhlich model can guarantee fairly good results with an advantage of tremendously reduced computational consumption. Using this model, the modulation of the electron mobility of monolayer InSe by the dielectric environment is studied. The electron mobility can be drastically enhanced by coating high-dielectric materials, with room-temperature mobility improved from about to about , due to the strong suppression of Fröhlich scattering.
Rapid identification of lattice thermal conductivity of semiconductors from their crystal structure is required in the discovery of functional materials. A promising strategy is using a machine learning method based on a first-principles dataset, which, however, suffers from the dilemma of too little data available. In this work, the crystal graph convolutional neural networks (CGCNN) model was improved by enhancing the information of atomic descriptors (for short CGCNN-D), and the transfer learning (TL) method was combined to overcome the problem of small datasets. It is found that the CGCNN-D has improved predicting performance for both electronic bandgap with large data volume and thermal conductivity with small data volume, with the mean absolute error reducing 7% and 10%, respectively, indicating the importance of the improved atomic description. Applying TL with electronic bandgap as a proxy into the CGCNN-D further upgrades the prediction accuracy for thermal conductivity that has only 95 pieces of data, yielding 19% decrease in the mean absolute error as compared to the original CGCNN. The trained CGCNN-D-TL model was used to quickly estimate the thermal conductivities of thousands of semiconductors, and the materials identified with potentially high thermal conductivity were further screened by the optimized Slack model. Finally, the most promising BC2N was discovered and then confirmed by the first-principles calculations, which shows room-temperature thermal conductivities of 731, 594, and 500 W m−1 K–1 along the three principal axes of its lattice structure.
9 September 2021 in Physical Chemistry Chemical Physics
The indirect bandgap of two-dimensional GaN hinders its application in the optical field. Hydrogenation can convert the bandgap type of the GaN monolayer from an indirect to a direct one and also tune the bandgap size. The thermal transport, an important property in the application of two-dimensional materials, is also influenced by hydrogenation. By performing first-principles calculations and solving the phonon Boltzmann equation, we investigate the effect of hydrogenation on the thermal conductivity of the GaN monolayer. The results show that hydrogenation will slightly increase the thermal conductivity of the GaN monolayer from 70.62 Wm−1 K−1 to 76.23 Wm−1 K−1 at 300 K. The little effect of hydrogenation on thermal conductivity is mainly dominated by two competing factors: (1) the reduction of ZA mode lifetime due to the breaking of reflection symmetry after hydrogenation and (2) the increased contribution from TA and LA modes due to the reduction of anharmonic scattering caused by the enlarged phonon bandgap after hydrogenation. The results are compared with other two-dimensional materials with hexagonal monolayer structures.