Click on the title to browse this book

The optical properties of YAG:Ce phosphor were measured by a double-integrating-sphere system and calculated by Mie theory and Monte Carlo ray tracing to provide precise optical characterizations of YAG:Ce phosphor for white light-emitting diode (LED) packaging design. Measurement results showed that the phosphor presents strong absorption for blue light, high reflection for yellow light, and an isotropic emission pattern of converted light. The conversion efficiency and quantum efficiency for the saturated phosphor are around 70% and 87%, respectively. Based on the measurement results, the absorption coefficient, scattering coefficient, and anisotropy factor of the phosphor calculated by Mie theory were compared with those calculated by ray-tracing simulation to modify Mie theory to find a reasonable method that can easily obtain the optical constants of YAG:Ce phosphor. Comparisons revealed that Mie theory can predict the variation of the optical constants of phosphor, but the absorption and scattering cross sections should be multiplied with two fitting parameters. The fitting pa rameters have been given in this study and can be obtained by testing packaged LEDs with different phosphor concentrations.

Recent years, semiconductor quantum dots (QDs) have attracted tremendous attentions for their unique characteristics for solid-state lighting (SSL) and thin-film display applications. The pure and tunable spectra of QDs make it possible to simultaneously achieve excellent color-rendering properties and high luminous efficiency (LE) when combining colloidal QDs with light-emitting diodes (LEDs). Due to its solution-based synthetic route, QDs are impractical for fabrication of LED. QDs have to be incorporated into polymer matrix, and the mixture is dispensed into the LED mold or placed onto the LED to fabricate the QD–LEDs, which is known as the packaging process. In this process, the compatibility of QDs' surface ligands with the polymer matrix should be ensured, otherwise the poor compatibility can lead to agglomeration or surface damage of QDs. Besides, combination of QDs–polymer with LED chip is a key step that converts part of blue light into other wavelengths (WLs) of light, so as to generate white light in the end. Since QD-LEDs consist of three or more kinds of QDs, the spectra distribution should be optimized to achieve a high color-rendering ability. This requires both theoretical spectra optimization and experimental validation. In addition, to prolong the reliability and lifetime of QD-LEDs, QDs have to be protected from oxygen and moisture penetration. And the heat generation inside the package should be well controlled because high temperature results in QDs' thermal quenching, consequently deteriorates QD-LEDs' performance greatly. Overall, QD-LEDs' packaging and applications present the above-mentioned technical challenges. A profound and comprehensive understanding of these problems enables the advancements of QD-LEDs' packaging processes and designs. In this review, we summarized the recent progress in the packaging of QD-LEDs. The wide applications of QD-LEDs in lighting and display were overviewed, followed by the challenges and the corresponding progresses for the QD-LEDs' packaging. This is a domain in which significant progress has been achieved in the last decade, and reporting on these advances will facilitate state-of-the-art QD-LEDs' packaging and application technologies.

Uniform color distribution is essential for the packaging of light emitting diodes (LEDs). The Monte Carlo ray tracing method is applied to analyze the color distribution of white LEDs. Five packaging methods are investigated and the location of phosphor layer is varied. Results reveal that the packaging method is the primary factor affecting the color distribution and a nonreflector packaging method presents better color uniformity. The location of phosphor has a small impact on the color uniformity but remote location, if too far, can reduce the uniformity significantly. The reduction of color uniformity may exceed 88%.