Health and safety (H&S) on a construction site can either make or break a contractor, if not properly managed. The usage of Building Information Modeling (BIM) for H&S on construction execution has the potential to augment practitioner understanding of their sites, and by so doing reduce the probability of accidents. This research explores BIM usage within the construction industry in relation to H&S communication. In addition to an extensive literature review, a questionnaire survey was conducted to gather information on the embedment of H&S planning with the BIM environment for site practitioners. The analysis of responses indicated that BIM will enhance the current approach of H&S planning for construction site personnel. From the survey, toolbox talk will have to be integrated with the BIM environment, because it is the predominantly used procedure for enhancing H&S issues within construction sites. The advantage is that personnel can visually understand H&S issues as work progresses during the toolbox talk onsite.
\ud Purpose – The purpose of this paper is to find optimal solutions for conceptual design automation, which can be integrated with Building Information Modelling (BIM) support for construction automation. Problems relating ostensibly to failures in computational support for the conceptual design stage are well-documented in extant literature. These failures are multifarious and significant, with several deficiencies being acknowledged in the Architecture, Engineering, and Construction (AEC) industry. Whilst acknowledging this, extant literature has highlighted the importance of computational design in the AEC industry; and failures in this area include the need to strengthen the congruent links and support mechanisms in order to exploit the opportunities presented by new computational design methods. Given this, it is postulated that the application of generative design could enhance the design experience by assisting designers with the iterative generation of alternatives and parameterisation (change management) processes. Moreover, asBIM applications are increasingly providing comprehensive support for modelling and management, then additional synergies could be examined for further exploitation.\ud Design/methodology/approach – This paper focusses on the potential for developing an interactive BIM environment that purposefully adopts generative design as a method of computational design for the early design stages. This research facilitates the automation of the conceptual architectural design process, using BIM as the central conduit for enhancing the integration of the whole building design process (including design interfaces). This approach is designed to improve designers’ cognition and collaboration during the conceptual architectural design process.\ud Findings – This paper evaluates the existing methods and decision support mechanisms, and it introduces the potential of combining different concepts into a single environment (generative design/BIM).\ud Originality/value – This research is novel, in that it critically appraises virtual generative workspaces using BIM as the central conduit. The outcome and intervention of this research forms a theoretical basis for the development of a “proof of concept” prototype, which actively engages generative design into a single dynamic BIM environment to support the early conceptual design process.\ud Keywords BIM, IT/Design, Computer-based environment, Conceptua
5 June 2017 in Journal of Engineering, Design and Technology
Purpose: The section of the research presented in this paper aims to review and explore health and safety (H&S) issues on construction sites. It has the sole intention of using better computer visualisation to meet the needs of site practitioners in understanding such H&S problems. Design/methodology/approach: The methodology follows a traditional literature review approach to understand the development of building information modelling (BIM) technology up to its current status. A questionnaire survey was conducted to gather information on the embedding of H&S planning by site practitioners within the BIM environment. Findings: BIM has the potential to be used in H&S planning procedures, particularly in those related to tasks on construction sites. A framework for an integrated visual tool is developed for better H&S practice on site. It may be used actively by all practitioners, starting with site induction and addresses, inter alia, personal hazard perception. Research limitations/implications: This paper provides a foundation for developing a tool that helps construction personnel explore potential H&S risks on site before construction begins. By introducing a framework for integrating BIM and project planning, a prototype can be developed to demonstrate the application of the proposed framework. Originality/value: The research presented in this paper introduces BIM usage during the construction stage as a tool that supports a H&S toolbox. The paper proposes the useful framework for better H&S practice on site that can be used actively by all practitioners. The intention is to find a way forward in addressing “real” H&S site issues that may not be easily understood by practitioners without the full aid of visualisation scenarios.
The growth and advantage of Building Information Modeling (BIM) has recently gained momentum in the expanding needs of the construction industry, one that varies across disciplines. The UK government is the largest public stakeholder client that has realized the benefits and advantages of BIM when used in procuring projects. The usage and adoption of BIM in all UK government-procured projects with a Level 2 BIM status will be mandatory by 2016. Will this target be achievable by 2016? This study investigates that possibility. A critical review of the BIM literature and the evidence based on the government target of 2016 was carried out. At the current stage, it appears that Level 2 adoption is achievable by 2016 for large construction firms. However, the technology needs to be properly tailored to meet SMEs variables if the Level 2 status is to be achieved for the entire industry.
The integration and automation of the whole design and implementation process has become a pivotal factor in Architecture, Engineering, and Construction (AEC) projects, especially regarding recent technological developments and emergent drivers in the field. Extant literature has highlighted a series of recurrent problems in process integration, especially at the conceptual design stage. This study presents the adoption of Generative Building Information Modelling (G-BIM) workspaces as an emerging technology. This has the potential to leverage conceptual design innovation in AEC projects. It builds upon the findings of an initial survey, and proffers a framework for using generative BIM workspaces at the conceptual design stage. This framework highlights the links and dependencies between generative/parametric tools and BIM applications to expedite information transition using generative tools primarily based on neutral BIM standards. Limitations of tools and approaches for providing accurate project information models are also captured in this framework. This paper demonstrates an overview of the G-BIM framework and the developed conceptual tool. Moreover, it reports on the challenges and opportunities associated with existing software applications. Findings reveal that the application of Generative Design (GD) can significantly enhance the design experience by assisting designers in the iterative generation of design alternatives and parameterisation processes. This framework purposefully integrates BIM with GD to enhance the design process at the conceptual design stage. This forms the rubrics for a working prototype which actively engages GD methods into a single dynamic BIM environment – the results of which will be presented in later works