A microwave photonic frequency multiplier with low phase noise based on an optoelectronic oscillator (OEO) is proposed and experimentally demonstrated. In this scheme, a dual-parallel Mach–Zehnder modulator (DPMZM) is employed to generate the third-harmonic frequency of the input radio frequency (RF) signal, while the oscillation frequency of the OEO is also three times the RF signal frequency. By adjusting the bias voltages of different arms in the DPMZM, a triple-frequency signal with a high side-mode suppression ratio of 64.8 dB can be obtained. The experimental results indicate that the output of the frequency-multiplier has a better single-sideband phase noise value, for instance, −126 dBc/Hz@10 kHz at 20.019 GHz. It has improvements of 34 dB and 43.5 dB compared with the input RF signal and the simulated electrical frequency tripler module, respectively.

In this paper, an optoelectronic oscillator (OEO) with ultra-low phase noise and high stability based on the injection-locked and phase-locked loop is proposed. In theory, the injection-locked frequency range of the injection signal is studied based on the phase dynamics equation, and the phase noise performance of the injection-locked OEO is analyzed. The role of the phase-locked loop on the frequency stability of the OEO is analyzed based on the phase-locked loop transfer function. In addition, this paper builds an injection-locked OEO based on a phase-locked loop. The injection-locked signal is the high-frequency output of the multiplication crystal oscillator (MCO). At the same time, this MCO synchronously outputs a low-frequency signal, which is used as the reference signal of the phase-locked loop. The experimental results show that the proposed OEO output frequency is 10 GHz, and the phase noise is −89.25 dBc/Hz@100 Hz, −121.71 dBc/Hz@1 kHz, and −145.39 dBc/Hz@10 kHz; the side-mode suppression ratio is 80 dB; the frequency stability is 2.06 × 10${}^{-11}$@1 s, 9.03 × 10${}^{-11}$@10 s, 1.03 × 10${}^{-10}$@100 s, and 3.03 × 10${}^{-10}$@1000 s. Consistent with the theoretical analysis results, the solution takes into account the frequency stability, side-mode suppression ratio, and phase noise performance. The simple structure is more advantageous in practical applications.

A stable microwave signal transmission system for a distributed system that is capable of simultaneous downloads at multiple arbitrary nodes within the optical path is proposed. The download module, which is based on optical circulators and optical couplers, can be inserted at any node position within the transmission optical path to complete the downloading of frequency-synchronization signals. Experimentally, a distributed frequency-synchronization system with multiple download nodes is demonstrated over 40 km of optical fiber. Experimental results show that the signal has been downlink-transferred from different download modules with the standard deviation of phase jitter being 1°@10 GHz at 1 h through 40-km optical fiber. Moreover, the standard deviation of phase jitter between downloaded signals from any two download modules is also better than 1°@10 GHz at 1 h. In addition, the Allan Deviation is better than ${10}^{-12}$@1 h for the download module.

Classical frequency-stabilized lasers have achieved high-frequency stability and reproducibility; however, their extensive wavelength spacing limits their utility in various scenarios. This study introduces a novel frequency-stabilized laser scheme that integrates a Fabry-Perot etalon (FPE) with digital control technology and wavelength modulation techniques. The FPE, characterized by multiple transmission peaks at minimal frequency intervals, provides stable frequency references for different lasers, thereby enhancing the system’s flexibility and adaptability. An error signal is derived from the first-order differentiation of the FPE’s transmission curve. A 180° phase difference was observed in the feedback output signal when the laser’s central frequency diverged from the reference, determining that the direction of the frequency control was accordingly determined.Employing feedback control, the laser’s output frequency is stabilized at the transmission peak frequency of the FPE. Experimental results demonstrate that this stabilization scheme effectively locks the laser’s output wavelength to different transmission peak frequencies of the FPE, achieving 25 GHz wavelength spacing. The frequency stability is improved by two orders of magnitude on a second-level timescale, maintained within hundreds of kHz, equating to a frequency stability level of 10⁻¹⁰.

We propose a laser ranging calibration optical path system using multiple optoelectronic oscillators (OEOs) that provides long range, high precision, low cost and high stability. A phase locked loop is used to control the length of the calibration optical path, which is measured with high precision by alternating the oscillations between the measurement loop and the reference loop. The calibration optical path length exceeds 9000 m with the stability of 6.8 µm during 3 minutes, and the relative measurement accuracy of the calibration optical path reaches 6.9 × 10⁻¹⁰.

A broad-temperature-range wavelength tracking system employing a thermistor monitoring circuit and a tunable optical filter is proposed and experimentally demonstrated. In this scheme, a thermistor monitoring circuit is utilized to acquire the real-time resistance values of a distributed feedback laser diode (DFB-LD). When the mapping relationship curve among thermistor resistance, temperature, and center wavelength of the DFB-LD is established, the drive voltage of the narrowband tunable optical filter is dynamically adjusted to regulate its filter window. Therefore, wavelength tracking is achieved by matching the filter window and the center wavelength of the DFB-LD. The experimental results show that the proposed system can achieve adaptive wavelength tracking within the operation band of 1539.4 nm to 1548.6 nm across a temperature range from −40 °C to 60 °C. The wavelength detection resolution and the minimum step of wavelength control are better than 0.79 pm and 0.1 nm, respectively. By exploiting the conversion characteristics between the thermistor and the center wavelength of the DFB-LD, this approach transforms laser wavelength detection into a low-cost, real-time electrical measurement, significantly enhancing transmission stability and reliability of laser sources in complex thermal environments.