MXenes have emerged as promising materials for various mechanical applications due to their outstanding physicochemical merits, multilayered structures, excellent strength, flexibility, and electrical conductivity. Despite the substantial progress achieved in the rational design of MXenes nanostructures, the tutorial reviews on the mechanical properties of self-standing MXenes were not yet reported to our knowledge. Thus, it is essential to provide timely updates of the mechanical properties of MXenes, due to the explosion of publications in this filed. In pursuit of this aim, this review is dedicated to highlighting the recent advances in the rational design of self-standing MXene with unique mechanical properties for various applications. This includes elastic properties, ideal strengths, bending rigidity, adhesion, and sliding resistance theoretically as well as experimentally supported with various representative paradigms. Meanwhile, the mechanical properties of self-standing MXenes were compared with hybrid MXenes and various 2D materials. Then, the utilization of MXenes as supercapacitors for energy storage is also discussed. This review can provide a roadmap for the scientists to tailor the mechanical properties of MXene-based materials for the new generations of energy and sensor devices.
Early detection of tooth cracks is crucial for effective condition‐based monitoring and decision making. The scope of this work was to bring more insight into the vibration behavior of spur gears in the presence of single and multiple simultaneous tooth cracks. The investigation was conducted in both time and frequency domains. A finite element analysis was performed to determine the variation in stiffness with respect to the angular position for different combinations of crack lengths. A simplified nonlinear lumped parameter model of a one‐stage gearbox with six degrees of freedom was then developed to simulate the vibration response of faulty external spur gears. Four different multiple‐crack scenarios were proposed and studied. The performances of various statistical fault detection indicators were considered and investigated. The simulation results obtained via MATLAB indicated that, as the severity of a single crack increases, the values of the time domain statistical indicators increase also, but at different rates. Moreover, the number of cracks was found to have a negative effect on the values of all the performance indicators, except for the RMS. The number and amplitude of the sidebands in the frequency spectrum were also considered, while assessing the severity of the faults in each scenario. It was observed that, in the case of consecutive tooth cracks, the number of spectrum peaks and the number of cracks were consistent in the frequency range of 4‐5 kHz. The main finding of this study was that the peak spectral amplitude was the most sensitive indicator of the number and severity of cracks.