Amorphous sulfur was prepared by rapid compression of liquid sulfur at temperatures above the λ-transition for to preserve the high-temperature liquid structure. We conducted synchrotron high-energy X-ray diffraction and Raman spectroscopy to diagnose the structural evolution of amorphous sulfur from room temperature to post-λ-transition temperature. Discontinuous changes of the first and second peaks in atomic pair-distribution-function, g(r), were observed during the transition from amorphous to liquid sulfur. The average first-neighbor coordination numbers showed an abrupt drop from 1.92 to 1.81. The evolution of the chain length clearly shows that the transition was accompanied by polymeric chains breaking. Furthermore, a re-entry of the λ-transition structure was involved in the heating process. The amorphous sulfur, which inherits the post-λ-transition structure from its parent melts, transformed to the pre-λ-transition liquid structure at around 391 K. Upon further heating, the pre-λ-transition liquid transformed to a post-λ-transition structure through the well-known λ-transition process. This discovery offers a new perspective on amorphous sulfur’s structural inheritance from its parent liquid and has implications for understanding the structure, evolution and properties of amorphous sulfur and its liquids.
By using a self-designed pressure-jump apparatus, we investigated the melt solidification behavior in the rapid compression process for poly-ethylene-terephthalate (PET), polyether-ether-ketone (PEEK), isotactic polypropylene (iPP), high-density polyethylene (HDPE), and the living polymer sulfur. The experimental results clearly show that crystallization could be inhibited, and some melts were solidified to the full amorphous state for PET, PEEK, and sulfur. Full amorphous PEEK that was 24 mm in diameter and 12 mm in height was prepared, which exceeded the size obtained by the melt quenching method. The bulk amorphous sulfur thus obtained exhibited extraordinarily high thermal stability, and an abnormal exothermic transition to liquid sulfur was observed at around 396 K. Since the solidification of melt is realized by changing pressure instead of temperature and is not essentially limited by thermal conductivity, it is a promising way to prepare fully amorphous polymers. In addition, novel properties are also expected in these polymers solidified by the pressure-jump within milliseconds.
In situ high-energy X-ray diffraction of Nd60Fe30Al10 and Ce70Al10Cu20 metallic glasses is carried out under high pressure. During compression, Ce70Al10Cu20 and Nd60Fe30Al10 exhibit a polyamorphic transition from low-density state below 2.0 and 10.0 GPa, to high-density state above 8.4 and 21.1 GPa, respectively. The intermediate hysteresis regions are the mixture of both phases. Electrical resistance measurements under high pressure show that Ce70Al10Cu20 display a discontinuous change in pressure dependence curve of resistivity at around 1.7 GPa. The addition of Fe atom gives a significant standoff of phase transition pressure in Nd60Fe30Al10. The results in this work suggest that the solute element and microstructure of lanthanide solvent aggregates have implications on the polyamorphic transition in metallic glasses.
19 May 2017 in Journal of Physics D: Applied Physics
Mg 2 Si with narrow band gap has attracted increasing interest for its great potential applications. Theoretical calculations have predicted the metallization of Mg 2 Si under high pressure. In this work, the electrical resistance and Raman spectrum measurements of semiconducting Mg 2 Si were performed to investigate the metallization of Mg 2 Si by using diamond anvil cells and strip opposite anvils. A discontinuous change of electrical resistance was found at around 10–13 GPa. Mg 2 Si displays a semiconductive-like decreasing trend with increasing temperature before 10 GPa and a metallic-like increasing trend with increasing temperature after 13 GPa. The disappearance of Raman peaks above 9.7 GPa further supported the conclusion of metallization. These results suggest a semiconductor–metal transition at around 9.7 GPa in Mg 2 Si, which is close to the theoretical predictive metallization at 6–8 GPa.
Two kinds of glassy sulfurs are synthesized by the rapid compression method from liquid sulfur at temperatures below and above the λ -transition point. The glassy sulfur has different colors and transparencies, depending on temperature, which may inherit some structural information from the λ -transition. Raman spectrum studies of these samples show that a large fraction of polymeric chains exist in the glassy sulfur, even in the one solidified from T < Tλ. We find that a higher compression rate instead of a higher temperature of the parent liquid captures more polymeric chains. Pressure-induced glassy sulfur presents high thermal stability compared with temperature quenched glassy sulfur and could transform into liquid sulfur directly without crystallization through an abnormal exothermic melting course. High energy x-ray diffraction is utilized to study the local order of the pressure-induced glassy sulfur.