Yusuf Sahin

Prof. Dr. Yusuf Sahin


Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

3 August 2024 in Advanced Engineering Materials
Verified
Journal Article
Open access
GKGazi Basar Kocabas
Gazi Basar Kocabas
SYSenai YALÇINKAYA
Senai YALÇINKAYA
ECErhan Cetin
Erhan Cetin
YSYusuf Sahin
Yusuf Sahin
Multicell design and lattice structure as filling material are two effective methods for enhancing the energy absorption performance of thin‐walled tubes. This study combines these two approaches to present a multicell tube with a novel lattice structure and investigates the energy absorption performances of these hybrid multicell tubes under axial (0°) and oblique (10°, 20°, and 30°) impact loading conditions. As filling structure, β‐Ti 3 Au lattice geometry with varying lattice strut diameters and the number of lattice unit cells are used, while the single and multicell thin‐walled tubes with different tube thicknesses are employed as main absorbing element. In this context, the effects of numbers of lattice unit cells, lattice strut diameter, cell numbers of the tube, and tube thickness on energy absorption performance of hybrid tubes are examined using validated nonlinear finite element models. This investigation unveils that the synergistic interplay between the multicell tubes and lattice structure during deformation significantly elevates the energy absorption performance of the hybrid structure. Notably, the findings demonstrate that multicell hybrid tubes exhibit a remarkable capacity to absorb up to 30.36% more impact energy compared to the aggregate absorption of individual components in hybrid tubes.

30 September 2023 in International Journal of Automotive Science And Technology
Verified
Journal Article
Open access
PDF file
GKGazi Başar KOCABAŞ
Gazi Başar KOCABAŞ
ECErhan Cetin
Erhan Cetin
SYSenai YALÇINKAYA
Senai YALÇINKAYA
YSYusuf Sahin
Yusuf Sahin
In this study, β-Ti3Au lattice structure was proposed for the first time in the literature as a filling material to increase the energy absorption performance of thin-walled tubes. In this context, the energy absorption performances of conventional lattice structure (i.e., BCC and FCC) filled thin-walled tubes and proposed novel β-Ti3Au lattice structure filled thin-walled tubes with proposed were compared experimentally. BCC hybrid, FCC hybrid and β-Ti3Au hybrid structures produced by additive manufacturing technology using PA2200 powder were crushed and evaluated by considering various crashworthiness criteria such as EA and SEA. The results showed that the β-Ti3Au hybrid structures are better crashworthiness performance than that of traditional filling BCC and FCC lattice structure filled thin-walled tubes. In particular, the β-Ti3Au hybrid structure has 18.17% and 19.39% higher EA values than BCC hybrid and FCC hybrid, respectively. These values are 16.50% and 15.66% for SEA values, respectively. As a result, the current investigation showed that the suggested β-Ti3Au lattice structures as a filler material can be a significant alternative for applications where energy absorption performance is critical.

18 March 2021 in Advances in Materials and Processing Technologies
Verified
Journal Article
Closed access
YSYusuf Sahin
Yusuf Sahin
FŞFatih Şahin
Fatih Şahin
Basalt fabric filled epoxy composites (BFRCs) and adding of nano-Al2O3 particles by conventional stirring and followed by moulding technique to fabric filled epoxy composites (n-BFRCs) were prepared to obtain higher rigidities and strengths for automotive and chemical industries. The tribological property of the composites was studied under dry condition with a Response Surface Methodology (RSM) to study influences of material’s type, load and surface roughness. In addition, multiple regression analysis (MRA) was developed for predicting the dry wear results and compared with artificial neural network (ANN). The results indicated that volume loss increased with increasing load and surface roughness, but decreased with increasing hardness. Improvements of nano-Al2O3 particles in basalt composites were about 16.9% in compared with BFRCs. All main factors were effective on the wear of the composites, but hardness and load were the most significant factors, followed by surface roughness. Furthermore, both MRA and ANN approach provided an effective methodology for prediction of the wear of composites, but ANN was found to be more effective tool for getting more accurate results than that of MRA, particularly based on the determination of coefficient and absolute relative errors.

10 April 2023 in Advances in Materials and Processing Technologies
Verified
Journal Article
Closed access
YSYusuf Sahin
Yusuf Sahin
Surface roughness as a machinability index is very important parameter for getting a quality product in manufacturing industry because of affecting the fatique and fracture behaviour of any type of materials. Aim of the study is to generate statistical models in surface finish when machining AISI 1040 hardened mild steels with coated carbides including two different geometries of triangle and square under different conditions. The machining test was carried out at different cutting parameters of cutting speeds (65-76.5-90-104-119) m/min, feed rates (0.11-0.132-0.15-0.173-0.198) mm/rev. and depth of cuts (0.36-0.425-0.50-0.575-0.66) mm. The tools for experiment were coated carbide cutting tools that are formed by chemical vapour deposition while material used for the study was a mild steel, which is the generally used material for manufacturing industry. Furthermore, analysis of variance was used for determining the main factors/interactions. These results are compared and predicted through response surface methodology (RSM) and artificial neural network (ANN). Both approaches indicated that feed rate was dominant while others were not significant. Further, ANN’s predicion ability was higher than RSM because coefficients of determination were equalled to 0.995 and 0.925 for ANN and RSM, respectively, which were associated with mean squared errors of 0.00056 and 0.0088 for ANN and RSM, respectively. Moreover, percentage errors for square-shaped inserts in randomly selected test was 6.66% and 1.50% for RSM and ANN, respectively. Hence, two models are good at predicting surface roughness, which in turn can provide a very valuable tool for design and manufacturing of engineering applications, but ANN spends less time and gives more accuracy.

6 January 2025 in Advances in Science and Technology
Verified
Conference Paper
Closed access
PDF file
YSYusuf Sahin
Yusuf Sahin
Thermal property of carbon fiber-reinforced polymer composites (CRFPs) fabricated through vacuum assisted resin transfer molding method (VARTM) is investigated using Thermo Gravimetric Analysis/Differential Scanning Calorimetry tool. These analysis on laminate composites with three different orientations are carried out at room temperature up to 800°C. Also, mechanical and water absorption behavior of polymeric composites are determined. Among the orientation effect, a longitudinal direction sample including 39 vol. % carbon fiber in epoxy resin indicated that the mass loss in percentage was lower while decomposition temperature was higher than those of others due to higher mechanical strength. These composites revealed the most thermally stable among the others. Further, lower amounts of water absorption rates were obtained at 0o-orientation, followed by 0/90o-orientation composites, but no significant variations occurred with these orientations while some variations occurred for 30o-orientation with increasing the soaking times.