Senai YALÇINKAYA

Dr. Senai YALÇINKAYA


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 August 2024 in Advanced Engineering Materials
Verified
Journal Article
Open access
GKGazi Basar Kocabas
Gazi Basar Kocabas
SYSenai YALÇINKAYA
Senai YALÇINKAYA
ECErhan Cetin
Erhan Cetin
YSYusuf Sahin
Yusuf Sahin
Multicell design and lattice structure as filling material are two effective methods for enhancing the energy absorption performance of thin‐walled tubes. This study combines these two approaches to present a multicell tube with a novel lattice structure and investigates the energy absorption performances of these hybrid multicell tubes under axial (0°) and oblique (10°, 20°, and 30°) impact loading conditions. As filling structure, β‐Ti 3 Au lattice geometry with varying lattice strut diameters and the number of lattice unit cells are used, while the single and multicell thin‐walled tubes with different tube thicknesses are employed as main absorbing element. In this context, the effects of numbers of lattice unit cells, lattice strut diameter, cell numbers of the tube, and tube thickness on energy absorption performance of hybrid tubes are examined using validated nonlinear finite element models. This investigation unveils that the synergistic interplay between the multicell tubes and lattice structure during deformation significantly elevates the energy absorption performance of the hybrid structure. Notably, the findings demonstrate that multicell hybrid tubes exhibit a remarkable capacity to absorb up to 30.36% more impact energy compared to the aggregate absorption of individual components in hybrid tubes.

25 February 2025 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
SYSenai YALÇINKAYA
Senai YALÇINKAYA
DYDUDU MERTGENÇ YOLDAŞ
DUDU MERTGENÇ YOLDAŞ
MYMEHMET FATİH YOLDAŞ
MEHMET FATİH YOLDAŞ
Since composite materials are light and corrosion-resistant, they have replaced many traditional materials in the aviation and marine industries. Composite materials have the advantages of a much higher strength–weight ratio, lower maintenance requirements, and the ability to form complex shapes, such as bodies, compared to carbon steel. In this study, the mechanical properties of glass fiber reinforced (GFRP) and carbon fiber reinforced (CFRP) composite materials were investigated in marine applications in which composite materials had been used. In this study, 0/90 oriented twill weave eight-ply GFRP and eight-ply CFRP composite materials were used, incorporating the hand lay-up method and hot-pressing method. Seawater was taken from the Aegean Sea, Izmir Province (Balçova/İnciraltı), and had an average temperature of 22.43 °C. This seawater was kept in different containers for 30 days and 60 days (a total of 1440 h of keeping in seawater) with the intent to test the GFRP and CFRP composite samples separately. The produced CFRP and GFRP sheets were then cut with a wet (circular) saw in accordance with the standard procedure in the Composite Research and Testing Laboratory of the Dokuz Eylul University Department of Mechanical Engineering. Moisture retention percentages and Charpy impact tests were carried out. Then, three-point bending tests were carried out according to TS EN ISO 14125. The damage in the material was examined using a ZEISS Stereo Discovery.V12 imaging microscope (Oberkochen, Germany). The mechanical properties of CFRP- and GFRP-reinforced composite samples before and after aging were investigated using the Charpy impact test and three-point bending test. Then, the effects of the seawater environment on the mechanical properties of the CFRP and GFRP composite materials were evaluated by comparing the results. The aim was to better understand what kind of damage would occur in GFRP and CFRP composite materials given the effects of seawater and at what stages changes would occur in the mechanical properties of these materials. Moisture retention rates (%) in the tested samples after the Charpy impact test were 2.56% in GFRP and 0.47% in CFRP after 30 days. In the tested samples after the three-point bending test, these values were 1.41% in GFRP and 0.31% in CFRP after 30 days. Subsequent to the Charpy impact tests, the fracture toughness values of the CFRP samples tested at the 30 J impact energy level before aging in seawater conditions for 30 days or 60 days were found to be increased by 15.79% and 21.08%, respectively. The fracture toughness values of the GFRP tested at the 30 J impact energy level in dry conditions and kept in seawater for 30 days or 60 days were found to be 27.69% and 29.23%, respectively. The energy absorbed during the impact tests by the GFRP samples was higher than in the CFRP samples. This showed that the GFRP samples were more brittle. Subsequent to the three-point bending tests, the CFRP composite samples kept in seawater for periods of 30 days and 60 days showed changes in the modulus of elasticity of 7.48% and 7.46%, respectively, compared to the dry samples. The GFRP composite samples kept in seawater for periods of 30 days and 60 days showed changes in the modulus of elasticity of 7.015% and 11.53%, respectively, compared to the dry samples. The change in the modulus of elasticity was less in the CFRP samples than in GFRP. All of these results showed that the mechanical properties of CFRP were better than those of GFRP.

30 September 2023 in International Journal of Automotive Science And Technology
Verified
Journal Article
Open access
PDF file
GKGazi Başar KOCABAŞ
Gazi Başar KOCABAŞ
ECErhan Cetin
Erhan Cetin
SYSenai YALÇINKAYA
Senai YALÇINKAYA
YSYusuf Sahin
Yusuf Sahin
In this study, β-Ti3Au lattice structure was proposed for the first time in the literature as a filling material to increase the energy absorption performance of thin-walled tubes. In this context, the energy absorption performances of conventional lattice structure (i.e., BCC and FCC) filled thin-walled tubes and proposed novel β-Ti3Au lattice structure filled thin-walled tubes with proposed were compared experimentally. BCC hybrid, FCC hybrid and β-Ti3Au hybrid structures produced by additive manufacturing technology using PA2200 powder were crushed and evaluated by considering various crashworthiness criteria such as EA and SEA. The results showed that the β-Ti3Au hybrid structures are better crashworthiness performance than that of traditional filling BCC and FCC lattice structure filled thin-walled tubes. In particular, the β-Ti3Au hybrid structure has 18.17% and 19.39% higher EA values than BCC hybrid and FCC hybrid, respectively. These values are 16.50% and 15.66% for SEA values, respectively. As a result, the current investigation showed that the suggested β-Ti3Au lattice structures as a filler material can be a significant alternative for applications where energy absorption performance is critical.

5 September 2025 in Polymers
Verified
Journal Article
Open access
PDF file
SYSenai YALÇINKAYA
Senai YALÇINKAYA
MYMEHMET FATİH YOLDAŞ
MEHMET FATİH YOLDAŞ
DYDUDU MERTGENÇ YOLDAŞ
DUDU MERTGENÇ YOLDAŞ
The depletion of fossil fuels and the rise of environmental concerns have increased the importance of renewable energy sources, positioning wind energy as a key alternative. Modern wind turbine blades are predominantly manufactured from composite materials due to their light weight, high strength, and resistance to corrosion. In offshore applications, approximately 95% of the composite content is glass fiber-reinforced polymer (GFRP), while the remaining 5% is carbon fiber-reinforced polymer (CFRP). GFRP is favored for its low cost and fatigue resistance, whereas CFRP offers superior strength and stiffness but is limited by high production costs. This study investigates the durability of adhesively bonded GFRP and CFRP joints under marine exposure. Seven-layer GFRP and eight-layer CFRP laminates were produced using a 90° unidirectional twill weave and prepared in accordance with ASTM D5868-01. Specimens were immersed in natural Aegean Sea water (21 °C, salinity 3.3–3.7%) for 1, 2, and 3 months. Measurements revealed that GFRP absorbed significantly more moisture (1.02%, 2.97%, 3.78%) than CFRP (0.49%, 0.76%, 0.91%). Four-point bending tests conducted according to ASTM D790 showed reductions in Young’s modulus of up to 9.45% for GFRP and 3.48% for CFRP. Scanning electron microscopy (SEM) confirmed that moisture-induced degradation was more severe in GFRP joints compared to CFRP. These findings highlight the critical role of environmental exposure in the mechanical performance of marine composite joints.

28 February 2022 in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Verified
Journal Article
Closed access
EAEbuzer aygul
Ebuzer aygul
SYSenai YALÇINKAYA
Senai YALÇINKAYA
YŞYusuf Şahi̇n
Yusuf Şahi̇n
Bu çalışmada eklemeli imalat üretim tekniği, Wolfram (W), Silisyum (Si), ve Molibden (Mo) katkılı Co-Cr biyomedikal alaşımını üretmek için tercih edilmiştir. Biyomedikal uygulamalada, Wolfram (W), Silisyum (Si), Molibden (Mo), Krom (Cr), ve Kobalt (Co) elementlerinden oluşan alaşım, iyi aşınma ve yüksek korozyon değeri ile bilinir. Eklemeli imalat üretim tekniklerinden Seçici Lazer Ergitme (SLM) yöntemi kullanılarak iki adet Co-Cr-Mo alaşımı üretilmiştir. Üretilen numunelerden bir adet daha sona ikincil bir ısıl tavlama işlemine tabi tutulmuştur. Üretilen alaşımların mikro yapıları X-Işını difraktometresi (XRD), Enerji yayıyımlı X-Işını analizi (EDX) ve taramalı elektron mikroskobu (SEM) kullanılarak incelenmiştir. Daha sonra, alaşımlar elektrokimyasal korozyon testi, mikro sertlik testi ve Arşimet prensibi yoğunluk ölçümü ile mekanik özellikleri analiz edilmiştir. Analizler sonucunda elde edilen sonuçlar şunu göstermiştirki, eklemeli imalat üretim tekniği ile homojen mikroyapılı bir Co-Cr-Mo alaşımı üretilmiştir ve ikincil ısıl işlem, malzemenin mikro yapısı ve mekanik özellikleri üzerinde ciddi değişikliklere sebep olmuştur.

1 January 2022 in INTERNATIONAL REFEREED JOURNAL OF ENGINEERING AND SCIENCES
Verified
Journal Article
Closed access
AKAli Karafaki̇oglu
Ali Karafaki̇oglu
FBFevzi Bedi̇r
Fevzi Bedi̇r
SYSenai YALÇINKAYA
Senai YALÇINKAYA
SÖSevil İnan Öz
Sevil İnan Öz
AUArda Uludağ
Arda Uludağ
The most widely used welding joining method in the automotive industry is resistance spot welding. Resistance spot welding (RSW) is the welding area where heat is produced by the effect of resistance against the flow as a result of exposing the welded parts to a local electric current. It has become an important issue to apply an effective approach method to guarantee weld quality and optimize welding parameters. This is of high value in theory and practice. In the literature, the effects of spot welding process parameters on the weld core diameter and electrode penetration depth are mostly investigated. Weld strength in RSW is affected by many process parameters such as applied electric current, compression force, welding time. Due to the contact resistance and joule heating, a molten weld nugget zone is formed on the work pieces. It is desirable to have the maximum temperature at the interface of the parts to be joined. In practice, the production of welds of acceptable quality depends on the definition of optimum weld parameters and the application of appropriate controls to ensure constant weld quality over a long production period. In the experimental studies, the optimization of the welding parameters was studied in order to obtain the maximum tensile-shear strength. The most prominent process parameters in experimental studies are electrode force, welding currents and welding times. Different algorithms have been developed for the optimization of welding parameters. The verification tests clearly show that it is possible to increase the tensile-shear strength of the connection with the combination of appropriate welding parameters. As a result, the experimental results confirm the validity of the algorithms used to improve welding performance and optimize welding parameters in resistance spot welding processes.