For lightweight steel frame structures consisting of steel H-beams and cold-formed steel columns filled with concrete, seismic performance comparison tests and numerical simulation analyses were performed for bare and infilled frames. The effects of the lightweight wall panels, the axial compression ratio and the wall thickness of the steel sections of the columns on the seismic properties of the structure were investigated. The failure of the bare frame was concentrated in the weld fractures at the beam-column joints. When the wall panels were embedded in the frame, the damage was concentrated at the corners and edges of the wall panels and the connectors. The wall panels significantly improved the initial stiffness of the frame, early energy dissipation and resistance, and the wall panel energy dissipation rate was initially as great as 91%. As the axial compression ratio increased, the resistance of the structure significantly decreased. Under monotonic loading, the resistance on the structure with an axial compression ratio of 0.4 was reduced by nearly 44% compared to the structure without axial compression. Increasing the wall thickness of the steel sections of the columns increased the load-bearing capacity of the structure, but the increase diminished with increasing wall thickness.
In the stability analysis of loess fill slope, the fissure nature of loess is often ignored, which makes the stability calculation of fill slope too conservative. Based on the upper limit theory of plastic limit analysis, the stability analysis model of loess-filled fissured slope supported by frame prestressed anchors was established. Considering the tensile strength cut-off yield property of soil, the stability coefficient of slope was calculated, and the influence of different factors on slope stability was analyzed. The results show that ignoring the fissures in loess will overestimate the stability of the fill slope, and the support structure can significantly improve the stability of the loess-filled fissure slope. The research results of this paper can further enrich the stability analysis theory of loess-filled fissured slope supported by frame prestressed anchors, which is of great significance to guide engineering practice.
Combined with the deformation characteristics of flexible retaining structure, the horizontal displacement calculation method of loess fill slope supported by frame prestressed anchors is proposed. Based on the minimum potential energy method, the analytical solution of horizontal displacement of slope under self-weight and additional load is derived, and the influence of soil parameters and supporting structure parameters on displacement is analyzed. The proposed calculation method is applied to a practical engineering and compared with the numerical simulation, which shows that the method is reasonable and reliable. The minimum potential energy method is clear in concept and simple in solving the horizontal displacement of loess fill slope supported by frame prestressed anchors. The calculation method proposed in this paper can be applied to the structural optimization design of loess fill slope supported by frame prestressed anchors, and further enrich the displacement calculation theory of slope supported by flexible retaining structure.
21 August 2025 in Geotechnical and Geological Engineering