Chuanqin Pang

Chuanqin Pang


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 August 2025 in Coatings
Verified
Journal Article
Open access
PDF file
WZWei Zhuang
Wei Zhuang
TDTingting Ding
Tingting Ding
CPChuanqin Pang
Chuanqin Pang
XJXuwang Jiao
Xuwang Jiao
LGLitao Geng
Litao Geng
MSMin Sun
Min Sun
To study the mechanical properties and modification mechanism of thermosetting polyurethane (PU)-modified asphalt, the effects of polyurethane dosage on the workability of polyurethane-modified asphalt were analyzed by means of rotational viscosity tests. The mechanical properties of polyurethane-modified asphalt with different polyurethane dosages were explored using tensile tests and dynamic mechanical analysis (DMA). In addition, the thermodynamic behavior and micromorphology of polyurethane-modified asphalt were also thoroughly investigated using the test results of differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The results showed that PU obtained the optimum workability when the polyurethane dose was 50%: at 120 min, its rotational viscosity was 1005 cp, which was lower than 2800 cp (40% PU) and 760 cp (60% PU). Additionally, the results of fracture elongation and fracture strength indicated that the PU-modified asphalt had good flexibility and strength. Compared with base asphalt, the tensile strength of 50% PU-modified asphalt increased by 509%, which was significantly higher than 157% (40% PU) and more balanced than 897% (60% PU) in terms of strength and flexibility. Added PU can significantly improve the elasticity of asphalt at high temperatures, while increasing the proportion of asphalt adhesive components, enhancing the deformation ability and temperature stability of asphalt. As the dose of PU increases, the interface between asphalt and PU blended more fully, and the surface became smoother. When the dose of PU was 50% or more, the interface between asphalt and PU was well integrated with a smooth and flat surface, forming a more uniform and stable cross-linked network structure.

2 February 2026 in Coatings
Verified
Journal Article
Open access
PDF file
CPChuanqin Pang
Chuanqin Pang
ZHZhaoliang Huang
Zhaoliang Huang
JSJun Song
Jun Song
LGLitao Geng
Litao Geng
MSMin Sun
Min Sun
HLHuihui Li
Huihui Li
In order to clarify the road performance and load response behavior of polyurethane mixtures, a low-temperature bending test, dynamic modulus test, rutting test, Hamburg rutting test, and four-point bending fatigue test were conducted on multi-crushed stone polyurethane concrete (SPC-16) and polyurethane concrete (PC-20) as the test objects, and the results were compared with the road performance of an asphalt mastic crushed stone mixture (SMA-13). The differences in the load response between two typical polyurethane mixture pavement structures and a typical asphalt pavement structure were analyzed under four working conditions: a normal-temperature standard load, normal-temperature heavy load, high-temperature standard load, and high-temperature heavy load. The results showed that the low-temperature flexural tensile strength of the polyurethane mixture was 1.3–1.7-times that of SMA-13, the maximum flexural tensile strain was 1.1–1.8-times that of SMA-13, the dynamic stability of the polyurethane mixture was more than 15-times that of SMA-13, and the fatigue life of the polyurethane mixture was 8–12-times that of SMA-13. The surface deflection, base stress, and surface strain of the typical asphalt pavement structures and two typical polyurethane mixture pavement structures at the same temperature all increased with an increase in the load. The load response of the polyurethane mixture pavement structures under high-temperature conditions was relatively stable.