Aiming at difficult image acquisition and low recognition accuracy of two rice canopy pests, rice stem borer and rice leaf roller, we constructed a GA-Mask R-CNN (Generative Adversarial Based Mask Region Convolutional Neural Network) intelligent recognition model for rice stem borer and rice leaf roller, and we combined it with field monitoring equipment for them. Firstly, based on the biological habits of rice canopy pests, a variety of rice pest collection methods were used to obtain the images of rice stem borer and rice leaf roller pests. Based on different segmentation algorithms, the rice pest images were segmented to extract single pest samples. Secondly, the bug generator based on a generative adversarial network strategy improves the sensitivity of the classification network to the bug information, generates the pest information images in the real environment, and obtains the sample dataset for deep learning through multi-way augmentation. Then, through adding channel attention ECA module in Mask R-CNN and improving the connection of residual blocks in the backbone network ResNet101, the recognition accuracy of the model is improved. Finally, the GA-Mask R-CNN model was tested on a multi-source dataset with an average precision (AP) of 92.71%, recall (R) of 89.28% and a balanced score F1 of 90.96%. The average precision, recall, and balanced score F1 are improved by 7.07, 7.65, and 8.83%, respectively, compared to the original Mask R-CNN. The results show that the GA-Mask R-CNN model performance indexes are all better than the Mask R-CNN, the Faster R-CNN, the SSD, the YOLOv5, and other network models, which can provide technical support for remote intelligent monitoring of rice pests.

In the process of plant protection for fruit trees using rotary-wing UAVs, challenges such as droplet drift, insufficient canopy penetration, and low agrochemical utilization efficiency remain prominent. Among these, the uncertainty in the spatio-temporal distribution of downwash airflow is a key factor contributing to non-uniform droplet deposition and increased drift. To address this issue, we developed a wind field numerical simulation model based on an improved hierarchical leaf density model to clarify the spatio-temporal characteristics of downwash airflow, the scale of turbulence regions, and their effects on internal canopy airflow under varying flight altitudes and different rotor speeds. Field experiments were conducted in orchards to validate the accuracy of the model. Simulation results showed that the average error between the simulated and measured wind speeds inside the canopy was 8.4%, representing a 42.11% reduction compared to the non-hierarchical model and significantly improving the prediction accuracy. The coefficient of variation (CV) was 0.26 in the middle canopy layer and 0.29 in the lower layer, indicating a decreasing trend with an increasing canopy height. We systematically analyzed the variation in turbulence region scales under different flight conditions. This study provides theoretical support for optimizing UAV operation parameters to improve droplet deposition uniformity and enhance agrochemical utilization efficiency.

Rice membrane-covered cultivation offers notable agronomic advantages, including effective weed suppression and improved moisture retention. However, current mechanized approaches remain constrained by high labor requirements, low operational efficiency, and the inherent fragility of biodegradable membranes. To address these limitations, this study integrates a high-speed synchronous membrane-covering device, governed by a PSO-Fuzzy PID control algorithm, into a conventional rice transplanter. This integration enables precise coordination between membrane-laying and transplanting operations. The mechanical properties of the membranes were analyzed, and a tension evaluation model was developed considering structural parameters and roll diameter variation. Experimental tests on three biodegradable membranes revealed an average thickness of 0.012 mm, a longitudinal tensile force of 0.57 N, and a tensile strength of 2.85 N/mm. The PSO algorithm was employed to optimize fuzzy PID parameters (K = 5.3095, K_p = 10.6981, K_i = 0.0100, K_d = 8.2892), achieving adaptive synchronization between membrane output speed and transplanter travel speed. Simulation results demonstrated that the PSO-Fuzzy PID reduced rise time by 53.13%, stabilization time by 90.58%, and overshoot by 3.3% compared with the conventional PID. In addition, a dedicated test bench for the membrane-covering device was designed and fabricated. Orthogonal experiments determined the optimal parameters for the speed-measurement system: a membrane pressure of 5.000 N, a roller width of 28.506 mm, and a placement angle of 0.690°. Under these conditions, the minimum membrane-stretching tension was 0.55 N, and the rotational speed error was 0.359%. Field tests indicated a synchronization error below 1.00%, a membrane-width variation rate below 1.50%, and strong anti-interference capability. The proposed device provides an effective solution for intelligent and fully mechanized rice transplanting.

To improve the driving comfort of continuously variable transmission (CVT) tractors, the shifting quality of hydrostatic power-split transmission with a standard planetary gear set was optimized. Firstly, the powertrain of the CVT and two shift strategies, direct-shift and bridge-shift, were introduced; then, a dynamic model of tractor shifting was constructed, and the models of key components such as wet clutches and proportional pressure valves were experimentally verified. Finally, the control parameters of the above two shifting strategies were optimized, and the acceleration impact and sliding energy loss caused by them were compared. The results showed the following: the minimum peak acceleration of the bridge-shift method was 0.385807 m/s²; the energy consumption of the bridge-shift method was significantly lower than that of the direct-shift method; the sliding friction work of clutches decreased by 14.92% and 75.84%, respectively, while their power loss decreased by 22.82% and 74.48%, respectively.

Research progress on mechanized garlic seeding technology in China

Traditional manual measurement of garlic bulb phenotypic traits is inefficient, subjective, poorly reproducible, and may cause sample damage. To improve the adaptability of three-dimensional reconstruction to garlic bulb morphology and grading-related parameter extraction, this study developed a non-destructive phenotypic measurement workflow based on multi-view image-based three-dimensional reconstruction. Four garlic materials with distinct bulb morphologies and epidermal characteristics were used to demonstrate the feasibility of the reconstruction workflow, and 40 Lanling white-skinned garlic bulbs were used for quantitative accuracy validation. Multi-view images were acquired using a high-resolution camera, a motorized turntable, and a controlled illumination system. Three-dimensional models were reconstructed using ContextCapture, and the resulting point clouds were processed in CloudCompare through cropping, denoising, downsampling, and pose correction. Maximum longitudinal diameter, maximum transverse diameter, and volume were extracted from the processed point clouds according to GB/T 45244-2025 (Grades and Specifications of Garlic) and validated against manual reference measurements. The coefficients of determination for maximum longitudinal diameter, maximum transverse diameter, and volume were 0.9935, 0.9909, and 0.9924, respectively, with RMSE values of 0.0529 cm, 0.0520 cm, and 0.8874 cm³, and MAPE values of 0.6647%, 0.7765%, and 1.9149%. Additional MAE, bias, confidence interval, and Bland–Altman analyses further supported the agreement between model-derived and manual reference measurements. These results demonstrate the feasibility of multi-view image-based three-dimensional reconstruction for non-destructive garlic bulb phenotypic measurement and provide a methodological basis for future grading-related assessment and three-dimensional phenotyping of bulbous horticultural crops.