The antireflection coating (ARC) suppresses surface light loss and thus improves the power conversion efficiency (PCE) of solar cells, which is its essential function. This paper reviews the latest applications of antireflection optical thin films in different types of solar cells and summarizes the experimental data. Basic optical theories of designing antireflection coatings, commonly used antireflection materials, and their classic combinations are introduced. Since single and double antireflection coatings no longer meet the research needs in terms of antireflection effect and bandwidth, the current research mainly concentrates on multiple layer antireflection coatings, for example, adjusting the porosity or material components to achieve a better refractive index matching and the reflection effect. However, blindly stacking the antireflection films is unfeasible, and the stress superposition would allow the film layer to fail quickly. The gradient refractive index (GRIN) structure almost eliminates the interface, which significantly improves the adhesion and permeability efficiency. The high-low-high-low refractive index (HLHL) structure achieves considerable antireflection efficiency with fewer materials while selecting materials with opposite stress properties improves the ease of stress management. However, more sophisticated techniques are needed to prepare these two structures. Furthermore, using fewer materials to achieve a better antireflection effect and reduce the impact of stress on the coatings is a research hotspot worthy of attention.

A miniature piezoresistive pressure sensor fabricated by temporary bonding technology was reported in this paper. The sensing membrane was formed on the device layer of an SOI (Silicon-On-Insulator) wafer, which was bonded to borosilicate glass (Borofloat 33, BF33) wafer for supporting before releasing with Cu-Cu bonding after boron doping and electrode patterning. The handle layer was bonded to another BF33 wafer after thinning and etching. Finally, the substrate BF33 wafer was thinned by chemical mechanical polishing (CMP) to reduce the total device thickness. The copper temporary bonding layer was removed by acid solution after dicing to release the sensing membrane. The chip area of the fabricated pressure sensor was of 1600 μm × 650 μm × 104 μm, and the size of a sensing membrane was of 100 μm × 100 μm × 2 μm. A higher sensitivity of 36 μV/(V∙kPa) in the range of 0–180 kPa was obtained. By further reducing the width, the fabricated miniature pressure sensor could be easily mounted in a medical catheter for the blood pressure measurement.

Light trapping is essential to improve the performance of thin film solar cells. In this paper, we performed a parametric optimization of double-sided skewed nanopyramid arrays that act as a light trapping scheme to increase light absorption in thin-film c-Si solar cells. Our theoretical optimization reveals that the short-circuit current density in a solar cell, employing only 1 μ m silicon could reach as high as 38.57 mA cm ⁻² , which is 17% and 245% higher than that of the Yablonovitch limit and planar-film counterparts, respectively. Furthermore, we analyzed the underlying physics of the light absorption enhancement through electric field intensity profiles.

With high power density, fast charging-discharging speed, and a long cycling life, supercapacitors are a kind of highly developed novel energy-storage device that has shown a growing performance and various unconventional shapes such as flexible, linear-type, stretchable, self-healing, etc. Here, we proposed a rational design of thin film, flexible micro-supercapacitors with in-plane interdigital electrodes, where the electrodes were fabricated using the oblique angle deposition technique to grow oblique Ni/NiO nanowire arrays directly on polyimide film. The obtained electrodes have a high specific surface area and good adhesion to the substrate compared with other in-plane micro-supercapacitors. Meanwhile, the as-fabricated micro-supercapacitors have good flexibility and satisfactory energy-storage performance, exhibiting a high specific capacity of 37.1 F/cm³, a high energy density of 5.14 mWh/cm³, a power density of up to 0.5 W/cm³, and good stability during charge-discharge cycles and repeated bending-recovery cycles, respectively. Our micro-supercapacitors can be used as ingenious energy storage devices for future portable and wearable electronic applications.

In(Ga)As quantum dot (QD) with uniform size and controlled sites have great potential in optical communications and quantum computing. In this review, we focus on the site-controlled preparation of In(Ga)As quantum dot arrays based on patterned substrates, including the improvements made by the researchers to enhance the quantum dot site-control capability and optical quality. Based on the current research on site-controlled In(Ga)As QDs, it has been possible to grow uniformly ordered In(Ga)As QD arrays, in which the size, morphology, and nucleus location of each quantum dot can be precisely controlled. In addition, the study of deoxidation treatment of patterned substrates has led to the performance enhancement of the prepared QD arrays. Finally, we propose that the future development of site-controlled In(Ga)As QD arrays lies in improving the optical quality and tuning their emission wavelength to the telecommunication band.