Aircraft with a twin vertical tail and leading-edge extension configuration may experience vertical tail buffeting during high-angle-of-attack maneuvering flight. This issue can lead to structural fatigue damage in the vertical tail, shortening its service life and increasing maintenance costs, ultimately compromising flight safety. Therefore, accurate prediction of buffeting loads and responses is essential during design. In the preliminary stage, wind tunnel testing is the primary means to obtain dynamic data such as fluctuating pressure and acceleration response, which can be transformed to full-scale conditions through similitude principles. However, the elastic scaling model used in buffeting tests is usually established for a specific flight condition. When the flow velocity or objective flight condition changes, the similitude relationship becomes invalid, limiting the applicability of test results and preventing full-envelope strength verification. To overcome this limitation, this study proposes a multi-objective point response prediction method for vertical tail buffeting. The method enables the prediction of full-scale responses at multiple objective flight conditions using wind tunnel data that do not strictly satisfy similitude criteria. A complete aircraft vertical tail buffet (rigid/elastic) hybrid model was developed for testing, and an Adjusted Model incorporating elastic scaling transformation was established. The proposed method was validated through experiments, demonstrating improved test data utilization and prediction accuracy across multiple-objective flight conditions.

This paper presents a preliminary investigation into the aeroelastic behavior of a tailless flying wing equipped with a rotating wingtip. Based on the configuration of Innovative Control Effectors (ICE) aircraft, an aeroelastic model of the tailless flying wing with a rotating wingtip has been developed. Both numerical simulation and wind tunnel tests (WTTs) are employed to study the aeroelastic characteristics of this unique design. The numerical simulation involves the coupling of computational fluid dynamics (CFD) and implicit dynamic approaches (IDAs). Using the CFD/IDA coupling method, aeroelastic response results are obtained under different flow dynamic pressures. The critical flutter dynamic pressure is identified by analyzing the trend of the damping coefficient, with a focus on its transition from negative to positive values. Additionally, the critical flutter velocity and flutter frequency are obtained from the WTT results. The critical flutter parameters, including dynamic pressure, velocity, and flutter frequency, are examined under different wingtip rotation frequencies and angles. These parameters are derived using both the CFD/IDA coupling method and WTT. The results indicate that the rotating wingtip plays a significant role in influencing the flutter behavior of aircraft with such a configuration. Research has shown that the rotation characteristics of the rotating wingtip are the primary factor affecting its aeroelastic behavior, and increasing both the rotation frequency and rotation angle can raise the flutter boundary and effectively suppress flutter onset.