Establishing requirements for acoustic measurements and calibration blocks and monitoring their implementation during production and certification is an important task. In this paper, the parameters affecting the propagation velocity of elastic waves in steel are considered, and their contribution to the total uncertainty of measuring the propagation velocity of a longitudinal wave is determined. Based on the data obtained, an analysis of the standards devoted to ultrasonic testing methods was carried out in terms of the requirements for calibration blocks. The conducted research allowed us to establish that the requirements imposed by the current standards do not sufficiently take into account a number of factors that may affect the characteristics of ultrasound measures and reference samples. Standard samples made without taking these factors into account are unlikely to adequately assess the metrological characteristics of ultrasound equipment.
This article investigates the acoustic properties of artificial discontinuities in reference specimens for the ultrasonic testing of welded joints in polyethylene pipes. An analysis is conducted on the reflectivity of various materials (air, sand, heat-resistant silicate-based sealant, and aluminum foil) and their correspondence to real defects occurring in weld seams. A theoretical analysis of reflection coefficients is performed, along with laboratory studies using digital radiography and ultrasonic testing. The results demonstrate that heat-resistant silicate sealant is the most suitable material for simulating defects, as its acoustic properties closely match those of real inclusions, and its geometric parameters remain stable during the welding process. The use of such specimens enhances the reliability of ultrasonic testing and reduces the likelihood of errors in defect classification.