The importance of parameters such as compaction pressure, binder percentage and retention time and their interaction in the production of carbonized briquettes for domestic or industrial use cannot be overestimated, as they have a considerable impact on the properties of the resulting briquettes. This study used Box-Behnken Response Surface Methodology (RSM) and Analysis Of Variance (ANOVA) to show how the above parameters and their interactions significantly influence the Higher Heating Value (HHV), ash content and Impact Resistance Index (IRI) of the biofuels obtained. The briquettes are characterized in accordance with American Society for Testing and Materials ASTM D-(5865 and 3172). IRI is determined by the drop test. The Niton XLT900s X-ray fluorescence spectrometer is used for mineralogical analysis. The peel starch used as a binder is characterized by the Association of Official Agricultural Chemists standard. This starch has a starch purity of 89.8 %, an HHV of 13974 kJ/kg, a protein content of 4.79 % and a sugar content of 1.3 %. The HHV of the biofuels ranged from 23783 to 26050 kJ/kg, their ash content from 2.86 to 5.24 %, and the IRI from 136.36 to 500 %. The significant effect of binder on these results is confirmed (p < 0.05). The Standard deviations of ± 21.425 kJ/kg, ± 0.021 % and ± 2.121 % were obtained between the experimental values and those of the mathematical models developed to predict HHV, ash content and IRI. The optimum parameters for industrial biofuel production correspond to a binder percentage of 10 %, a compaction pressure of 75 kPa and a retention time of 7.49 min. The experimental results under these conditions are: 25596 kJ/kg, 3.01 % and 375 % for HHV, ash content and IRI. In correlation with the absence of certain heavy metals, the study confirms that the briquettes produced are suitable for domestic use.

Fuels influence indoor air quality and occupants' health. This study aims to evaluate and compare the emissions of carbon monoxide (CO), carbon dioxide (CO₂), and aerodynamic size less than or equal to 2.5 µm (PM_2.5) from biofuel briquettes to those from household charcoal. This approach allows for selecting a fuel based on its pollutant emissions. CO emissions ranged between 0.79 ± 0.014 and 7.430 ± 0.063 g/MJ _delivered for biofuels and charcoal, respectively. The emitted CO₂ ranged between 2 ± 0.212 and 129 ± 1.41 g/MJ _delivered for biofuels and charcoal, respectively. The PM_2.5 emissions from biofuels and charcoal were 507.5 ± 61.5 and 256.50 ± 13.44 mg/MJ _delivered, respectively. The specific fuel consumption varied between 4.16 ± 0.056 and 1.35 ± 0.120 kg/L for biofuels and charcoal, respectively. The Bravais-Pearson statistical tests revealed a strong correlation between pollutant emissions and certain fuel properties. The analysis of variance (ANOVA) revealed a significance in the data, with a p-value of 0.05. The results obtained provide scientific evidence to support the promotion of biofuels for cleaner, affordable, and sustainable energy from sawdust, aiming to reduce deforestation. Graphical Abstract

Faced with the depletion of fossil resources and the need to promote a circular economy, lignocellulosic biomass represents a solution for energy transition and bioeconomy. However, wood sawdust, which contains bioactive compounds (secondary metabolites), is often burned in the open by many sawmills. This study aims to valorize Framiré wood sawdust by extracting its secondary metabolites through maceration and infusion, then converting the depleted residue into combustible briquettes. The yellowness index of the extracts ranged from 73.490 ± 0.021 (maceration) to 81.720 ± 0.014 (infusion). The total phenolic content varied from 0.097 ± 0.001 to 0.63 ± 0.049 gGAE/100 g dry matter for maceration and infusion, respectively. The extraction of bioactive compounds did not significantly affect the energy or mechanical properties of the fuels. Their higher heating value ranged from 26,153 ± 92 to 26,201 ± 90 kJ/kg for fuels with and without secondary metabolites, respectively. The Shock Resistance Index ranged from 139.33 ± 7.51% (without metabolites) to 153.00 ± 5.20% (with metabolites). A significant difference was observed in the specific consumption of the fuels, decreasing from 1.400 ± 0.100 to 0.861 ± 0.001 kg/L for fuels without and with secondary metabolites, respectively. These results open promising prospects, particularly for the use of Framiré extracts to develop flame-retardant products for wood and its derivatives.

Large-scale production of Bacillus thuringiensis, one of the most widely used biopesticides, is often limited by the high cost of conventional culture media. In this study, fermented cassava paste water (EFM), ripe mango pulp juice (CM), and cashew apple juice (JPC) were evaluated as alternative substrates for the liquid fermentation of B. thuringiensis var. kurstaki HD-1. Physicochemical analyses revealed acidic pH values and classified the substrates into two clusters: CM with high C/N ratios, organic matter, total sugars, and proteins, and EFM and JPC with lower C/N ratios and nutrient levels. Fermentation results indicated that JPC supported the highest biomass production (8.29 × 10¹³ CFU mL⁻¹), exceeding that in the standard Tryptone Soy Broth (TSB) medium. However, CM promoted the highest sporulation rate (1.46 × 10¹³ CFU mL⁻¹) and the greatest bioactive lipopeptides—iturins (102.2 mg L⁻¹) and surfactins (554.7 mg L⁻¹)—surpassing TSB. The antifungal activity of crude fermented CM, EFM, and TSB was evaluated against Sclerotium rolfsii. All samples significantly inhibited mycelial growth of the pathogen with no significant differences among substrates or concentrations tested. This study highlights the potential of B. thuringiensis-fermented agrowaste as a cost-effective, environmentally friendly biocontrol tool for Sclerotium rolfsii.