Monica Righini

Dr. Monica Righini

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2017 in Progress in Electromagnetics Research C
Verified
Journal Article
Open access
PDF file
Stefano MaddioStefano Maddio
Stefano Maddio
Giuseppe PelosiGiuseppe Pelosi
Giuseppe Pelosi
MRMonica Righini
Monica Righini
SSStefano Selleri
Stefano Selleri

1 February 2018 in Electronics Letters
Verified
Journal Article
Open access
PDF file
Stefano MaddioStefano Maddio
Stefano Maddio
GPG. Pelosi
G. Pelosi
MRMonica Righini
Monica Righini
SSS. Selleri
S. Selleri
A circular polarised antenna array based on the recursive application of the sequential rotation architecture is presented. The first level sequential arrangement is applied to a set of four non‐identical slightly detuned patches, resulting in a broadband improper array. At the second level, the sequential arrangement is applied to four identical first‐level sub‐arrays, regularising the structure. Experimental validations confirm a gain exceeding 10 dB from 5.35 to 7.25 GHz, with a maximum of 13 dB. Global bandwidth is 30% despite an area of only

15 January 2023 in Electronics
Verified
Journal Article
Open access
PDF file
Giovanni CollodiGiovanni Collodi
Giovanni Collodi
MRMonica Righini
Monica Righini
Alessandro CidronaliAlessandro Cidronali
Alessandro Cidronali
In this paper, we introduce an electronically tuneable band-stop filter based on a dielectric resonator, along with its design principles and equivalent circuit model aimed at the coexistence of intelligent transport systems (ITS) and cellular vehicle-to-everything (C-V2X) communications operating at 5.9 GHz, with the widely spread vehicular dedicated short range communications (DSRC) at 5.8 GHz. The proposed architecture involves a dielectric resonator coupled via a microstrip transmission line to a planar ring resonator. The resonance is electronically tuned by varying the bias voltage of a varactor diode placed in the ring. This design is analyzed theoretically and experimentally. For validation, a filter operating at 5.8 GHz was designed. The prototype is capable of enhancing coexistence exhibiting to features. First, when inserted into the ITS transmitter chain, it reduces unwanted transmitter emissions in the out-of-band spectrum occupied by the DSRC carriers in the 5.8 GHz frequency band of at least 25 dB, with a minimal insertion loss at 5. 9 GHz of 1.6 dB; secondly, when inserted in the ITS receiver chain, it exhibits high linearity that prevents the generation of intermodulation products falling into the filter pass band. The prototype features more than 21 dBm of third-order input intercept points, and a tuning range of 26 MHz while maintaining a minimal loaded Q factor of 93. The prototype is discussed regarding the detailed equivalent circuit parameter extraction and their dependency upon the control voltage.

19 October 2025 in Sensors
Verified
Journal Article
Open access
PDF file
Giacomo GiannettiGiacomo Giannetti
Giacomo Giannetti
MBMarco Badii
Marco Badii
GLGiovanni Lasagni
Giovanni Lasagni
Stefano MaddioStefano Maddio
Stefano Maddio
Giovanni CollodiGiovanni Collodi
Giovanni Collodi
Alessandro CidronaliAlessandro Cidronali
Alessandro Cidronali
This work presents an Internet of Things (IoT) node designed for low-power agrifood chain tracking in remote areas, where long-range terrestrial communication is either unavailable or severely limited. The novelty of this study lies in the development and characterization of an IoT node prototype that leverages direct-to-satellite connectivity through a geostationary Earth orbit (GEO) satellite, using long-range frequency-hopping spread spectrum (LR-FHSS) modulation in the licensed S-band. The prototype integrates a microcontroller unit that manages both the radio modem and a suite of sensors, enclosed in a plastic box suitable for field deployment. Characterization in an anechoic chamber demonstrated a maximum effective isotropic radiated power (EIRP) of 27.5 dBm, sufficient to establish a reliable satellite link. The onboard sensors provide global positioning as well as measurements of acceleration, temperature, humidity, and solar radiation intensity. Prototype performance was assessed in two representative scenarios: stationary and mobile. Regarding energy consumption, the average charge drained by the radio modem per transmission cycle was measured to be 356 mC. With a battery pack composed of four 2500 mAh NiMH cells, the estimated upper bound on the number of transmitted packets is approximately 25,000.

23 June 2025 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
Stefano MaddioStefano Maddio
Stefano Maddio
Giacomo GiannettiGiacomo Giannetti
Giacomo Giannetti
Alessandro CidronaliAlessandro Cidronali
Alessandro Cidronali
Giovanni CollodiGiovanni Collodi
Giovanni Collodi
MRMonica Righini
Monica Righini
SSStefano Selleri
Stefano Selleri
We present the result of a novel optimization strategy for the design of the antenna front-end for indoor positioning system based on the Cramér-Rao bound sensitivity analysis. The positioning system considered relies on the direction of arrival estimation via space division multiple access which in turn is enabled by a smart antenna operating a 2.45 GHz. The antenna is designed via an optimization process driven by an invasive weed optimization algorithm. This is based on a multi-objective cost function relying on an ad-hoc implementation of the Cramér-Rao analysis of the antenna beam set. The use of the Cramér-Rao analysis to drive the optimization represents the novelty of this manuscript. To prove the effectiveness of the approach, the antenna front-end is limited to the essential components, albeit suitable to cover almost 180° degrees of observable area. The localization performance – validated with a simulated experiment – outperforms the results found with similar results in real life. In detail, the mean dilution of precision ranges from 0.78° to 2.71°, with an average of 1.63° and a standard variation of 0.41°. The worst case of the best-set exhibits a maximum error below 4.67°. The 95% coverage is equal to 2.22°, with a range spanning from 1.87° to 2.52°, corresponding to a spread of 0.6°. Anyhow, a full statistics over the whole Pareto set and the whole cloud of antenna geometries is presented, to validate the choice of the sub-set of best solutions chosen.

26 July 2025 in Sensors
Verified
Journal Article
Open access
PDF file
GLGiovanni Lasagni
Giovanni Lasagni
ACAlessandro Calcaterra
Alessandro Calcaterra
MRMonica Righini
Monica Righini
GGGiovanni Gasparro
Giovanni Gasparro
Stefano MaddioStefano Maddio
Stefano Maddio
SSStefano Selleri
Stefano Selleri
In this paper, we present a system-level model of a digital multibeam antenna designed for Low Earth Orbit satellite communications operating in the Ka-band. We initially develop a suitable array topology, which is based on a thinned lattice, then adopt it as the foundation for evaluating its performance within a digital beamforming architecture. This architecture is implemented in a system-level simulator to evaluate the performance of the transmitter and receiver chains. This study advances the analysis of the digital antennas by incorporating both the RF front-end and digital sections non-idealities into a digital-twin framework. This approach enhances the designer’s ability to optimize the system with a holistic approach and provides insights into how various impairments affect the transmitter and receiver performance, identifying the subsystems’ parameter limits. To achieve this, we analyze several subsystems’ parameters and impairments, assessing their effects on both the antenna radiation and quality of the transmitted and received signals in a real applicative context. The results of this study reveal the sensitivity of the system to the impairments and suggest strategies to trade them off, emphasizing the importance of selecting appropriate subsystem features to optimize overall system performance.