Polyvinyl alcohol/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PVA/PEDOT:PSS) composite ultrafine fibers were successfully fabricated by high pressure airflow assisted electrospinning. The electrical properties of PVA/PEDOT:PSS nanofibers with different diameters were characterized. The average diameter of the nanofibers can be down to 68 nm. Due to its large specific surface area, ammonia sensing of the ultrafine nanofibers is more sensitive than the traditional electrospun fibers (average fiber diameter of 263 nm). The ammonia sensing properties of the samples were tested by impedance analysis. The results show that ultrafine PVA/PEDOT:PSS nanofibers are more suitable for detecting low concentrations of ammonia with higher sensitivity.

The Earth’s solid inner core is a highly attenuating medium. It consists mainly of iron. The high attenuation of sound wave propagation in the inner core is at odds with the widely accepted paradigm of hexagonal close-packed phase stability under inner core conditions, because sound waves propagate through the hexagonal iron without energy dissipation. Here we show by first-principles molecular dynamics that the body-centered cubic phase of iron, recently demonstrated to be thermodynamically stable under the inner core conditions, is considerably less elastic than the hexagonal phase. Being a crystalline phase, the body-centered cubic phase of iron possesses the viscosity close to that of a liquid iron. The high attenuation of sound in the inner core is due to the unique diffusion characteristic of the body-centered cubic phase. The low viscosity of iron in the inner core enables the convection and resolves a number of controversies.

The crystal structure of iron, the major component of the Earth's inner core (IC), is unknown under the IC high pressure (P) (3.3–3.6 Mbar) and temperature (T) (5000–7000 K). Experimental and theoretical data on the phase diagram of iron at these extreme PT conditions are contradictory. Applying quasi-ab initio and ab initio molecular dynamics we computed free energies of the body-centered cubic (bcc), hexagonal close-packed (hcp), and liquid phases. The ionic free energies, computed for the embedded-atom model, were corrected for electronic entropy. Such correction brings the melting temperatures of the hcp iron in very good agreement with previous ab initio data. This validates the calculation of the bcc phase, where fully ab initio treatment is not technically possible due to large sizes required for convergence. The resulting phase diagram shows stabilization of the bcc phase prior to melting in the pressure range of the IC. The melting temperature of the bcc phase is equal to 7190 K at the pressure 360 GPa.

Self-powered nanogenerators composed of poly(vinylidene fluoride) (PVDF) have received much attention. Solution blow spinning (SBS) is a neoteric process for preparing nanofiber mats with high efficiency and safely, and SBS is a mature fiber-forming technology that offers many advantages over conventional electrospinning methods. Herein, we adopted the SBS method to prepare independent PVDF nanofiber membranes (NFMs), and successfully employed them as nanogenerators. Finally, we tested the change in the output current caused by mechanical compression and stretching, and studied its durability and robustness by charging the capacitor, which can drive tiny electronic devices. The results show that the PVDF nanogenerators by using this SBS equipment can not only be used in wearable electronic textiles, but are also suitable for potential applications in micro-energy harvesting equipment.

Precise deposition of nanofibers is still an important issue in the applications of electrospinning (e-spinning), especially in rapid hemostasis of organs such as the liver, lung, and kidney. In this study, we propose an electric field-modified e-spinning technique with a metal cone attached to the spinning nozzle to realize controllable precise deposition of fibers. The deposition range of the e-spun fibers is tunable by changing the size of the metal cone, and the mechanism is attributed the focused electric field verified by theoretical simulations. This electric field-modified e-spinning method was further used to in situ precisely deposit medical glue N-octyl-2-cyanoacrylate (NOCA) fibers onto the resection site of rat liver to realize rapid hemostasis within 10 s. Postoperative pathological results indicate that less inflammatory response and tissue adhesion are observed in this electric field-modified e-spinning group compared with that of traditional airflow-assisted group. This technique combined with our designed handheld e-spinning device could be used in emergency medical treatment, clinics, field survival, and home care for its portability and precise deposition characteristics.

A facial electrospinning method of in situ precise fabricating magnetic fibrous membrane composed of polyurethane (PU) nanofibers decorated with superparamagnetic γ-Fe2O3 nanoparticles with simultaneous heat generation in response to alternating magnetic field (AMF) is reported. In this method, a conical aluminum auxiliary electrode is used to regulate the electrostatic field and affect the process of electrospinning for the in situ rapid and precise deposition of electrospun γ-Fe2O3/PU fibers. The auxiliary conical electrode can extend the jet stabilization zone of the precursor solution four times longer than that of without auxiliary electrode, which can achieve the precise control of the fiber deposition area. Moreover, the electrospun composite fibrous membranes show a rapid temperature increase from room temperature to 43 °C in 70 s under the AMF, which exhibits faster heating rate and higher heating temperature compared to the samples fabricated without the assist of the auxiliary electrode. The present results demonstrate that the in situ precise electrospinning with the help of an auxiliary conical electrode has the potential as a manipulative method for preparing magnetic composite fibers as well as magnetic hyperthermia of cancer therapy.