The International Water Association’s (IWA) established Anaerobic Digestion Model No. 1 (ADM1) was created to serve as a backup for experimental findings regarding the actual anaerobic digestion process. The previous model idea was adjusted and used to simulate an anaerobic digestion process in this study. Testing procedures, such as benchmark tests and balance checks, were performed in order to verify the accuracy of the implementation. These measures worked in tandem to ensure that the model was implemented flawlessly and without inconsistencies. The primary objective of this article is to construct a method that is based on the ADM1 for evaluating co-digestion and predicting the performance of the digestion process or methane yield based on the analyzed substrates’ physicochemical properties. Additional equations and simulations have been added to the standard model to create tools for evaluating the feasibility of anaerobic co-digestion. The study’s two most intriguing aspects are the optimal mixture and parameter dependence. The adjusted ADM1 is accurate in predicting the measured values of effluent COD, pH, methane, and produced biogas flows with a reasonable degree of accuracy, according to the validation results. This research shows how to use ADM1 in a wastewater treatment plant and other settings where anaerobic digestion is of interest.

Although mining plays a vital role in the economic development of many countries, devastating environmental repercussions are associated with it. The extraction of mineral resources inevitably results in the generation of acid mine drainage (AMD), which entails intricate oxidation interactions that occur under ambient conditions in abandoned and active mines. The arbitrary release of AMD can lead to a series of long-term environmental problems, degradation of aquatic habitats and health complications. Over the years, extensive progress has been made in the prevention and treatment of AMD, with some processes even progressing as far as the commercialisation level. This chapter therefore discusses the process of AMD formation, preventative and control measures and AMD treatment options applicable to both operating and developed mines, as well as to researchers interested in environmental remediation and rehabilitation. Advances in mineral beneficiation and water reclamation strategies employed in the AMD treatment processes are highlighted to shed light on strides being made towards promoting a circular economy in mining industries. The featured work therefore demonstrates the global progress towards environmental protection and water resource management. The challenges and loopholes associated with the current AMD treatment methods are deliberated and possible future prospects in the field are proposed.