Reliable and energy-efficient data collection from resource-limited sensors is essential to the success of future Internet of Things (IoT). In this article, we study the energy consumption minimization problem during the data collection from a generic wirelessly-powered sensor. Specifically, we determine the optimal data collection parameters, in terms of charging duration and charging power as well as sensor transmission rate, in real time according to the instantaneous channel condition while satisfying a certain latency constraint. For the scenario of ideal rate adaptive transmission with linear energy harvesting, we derive closed-form expressions for optimal transmission parameters. We also establish the condition on channel quality for successful data collection under a latency constraint. For the more practical case of finite block-length transmission with non-linear energy harvesting, we develop a deep reinforcement learning (DRL) solution for efficient online implementation. We also propose an online tuning scheme to cater for model inaccuracy and environment variation. The accuracy and effectiveness of our proposed approaches are verified by comparing with benchmark schemes. Our DRL-based approach has broad applicability and can solve other real-time optimal design problems in wireless communications.
In this paper, we propose an UAV-based relaying system with energy harvesting functionality. In particular, we assume that this system is operated in urban communication environments, where the channel between the UAV and the land destination is modeled as shadowed-Rician fading or shadowed- Rayleigh fading. Based on this setting, outage probability analysis for different urban environment parameters is derived. Finally, Monte Carlo simulations are conducted to verify the accuracy of our analytical results.
7 April 2022 in IEEE Transactions on Wireless Communications
In symbiotic radio (SR), a secondary transmitter (STx) transmits messages by modulating its information over the radio frequency (RF) signals received from a primary transmitter (PTx), and in return, the secondary transmission provides multipath gain to the primary transmission. In this paper, we are interested in the fundamental mutualistic mechanism between the primary and secondary transmissions, which describes the condition through which the two systems can benefit each other. Since the symbol period ratio $K$ between secondary and primary transmissions is an important system parameter that affects the mutualistic symbiosis, we first derive the theoretical performance in terms of bit error rate (BER) for both primary and secondary transmissions for arbitrary $K$ by using QPSK modulation scheme at the PTx and BPSK modulation scheme at the STx as an example setup. Then we the obtain closed-form expressions for the condition on $K$ to enable mutualistic symbiosis in SR, which is not related to the specific channel realizations but determined by the average strengths of the direct and backscatter links when the number of receiving antennas is large. Meanwhile, we analyze the average BER performance and the diversity orders for both transmissions in the high signal-to-noise-ratio (SNR) regime. Extensive simulations and numerical results are provided to verify the accuracy of our theoretical analysis and demonstrate the interrelationship between the primary and secondary transmissions.
16 February 2024 in IEEE Transactions on Communications
This paper explores the evolution of wireless communication networks from utilizing the sub-6 GHz spectrum and the millimeter wave frequency band to incorporating extremely high frequencies like optical and terahertz for 6G and beyond. While these higher frequencies offer broader bandwidths and extreme data rate capabilities, the transition from single-band and heterogeneous networks to multi-band networks (MBNs), where various frequency bands coexist introduces novel challenges in channel modeling, transceiver and antenna design, programmable simulation platforms, standardization, and resource allocation. This paper provides a tutorial overview from the communication design perspective of the various frequency bands, elaborating on the above issues. Then, we introduce and examine typical MBN architectures for future networks and provide a detailed overview of state-of-the-art resource allocation problems for existing MBNs that typically operate on two frequency bands. The considered resource allocation optimization problems and solution techniques are discussed comprehensively. We then identify key performance metrics and constraint sets that should be considered for resource allocation optimization in future MBNs and provide numerical results to depict how various system parameters and user behaviors can influence their performance. Finally, we present several potential research issues as future work for the design and performance optimization of MBNs.
28 June 2019 in IEEE Transactions on Vehicular Technology
In this paper, we consider the performance of a mixed free-space optical and radio frequency (FSO-RF) relaying system with energy harvesting in the existence of both atmospheric turbulence and pointing errors. More specially, we assume that the direct current (DC) component of the FSO signal, which is generally filtered out, can be used for energy harvesting at the relay. We derive the exact closed-form expression for the outage probability of this setup in terms of the bivariate Fox-H function. We also provide the asymptotic analysis to obtain the diversity order. Finally, Monte-Carlo simulations are carried out to verify the correctness of our analytical results.
14 January 2015 in IEEE Journal on Selected Areas in Communications
RF energy harvesting is a promising potential solution for providing convenient and perpetual energy supply to low-power wireless sensor networks. In this paper, we investigate the performance of overlaid wireless sensor transmission powered by RF energy harvesting from existing wireless system. Specifically, we derive the exact closed-form expression for the distribution function of harvested energy over a certain number of channel coherence time over Rayleigh fading channels with the consideration of hardware limitation, such as energy harvesting sensitivity and harvesting efficiency. We also obtain the exact distribution of the number of coherence time needed for fully charging the sensor. Based on these analytical results, we analyze the average packet delay and packet loss probability of sensor transmission subject to interference from existing system, for delay insensitive traffics and delay sensitive traffics, respectively. Finally, we investigate the optimal design of energy storage capacity of the sensor nodes to minimize the average packet transmission delay for delay insensitive traffics with two candidate transmission strategies.