Xiaowei Tang

Dr. Xiaowei Tang

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 June 2024 in Chemengineering
Verified
Journal Article
Open access
PDF file
XTXiaowei Tang
Xiaowei Tang
Yuehui HeYuehui He
Yuehui He
The usage of copper (Cu) ores containing low or no arsenic (As) has reduced, and Cu ores containing high levels of As have emerged as vital mineral resources for Cu extraction and processing. The quality of the Cu ores has decreased from 1.6% to approximately 1.0%. The proportion of As to Cu in 15% of Cu resources currently reaches 1:5. However, during the extraction and processing of Cu ores, As presents significant environmental harm. Hence, safely and effectively removing As is paramount in Cu smelting and processing, holding substantial importance in fostering environmentally sustainable practices within the Cu extraction and processing industry. This article consolidates the resource distribution of As-containing Cu (ACC) ores, comprehensively and systematically evaluates the present advancements in extracting techniques for these minerals, and identifies the challenges inherent in pyrometallurgical and wet processes for treating ACC deposits. Pyrometallurgy is a simple primary roasting technique and has widespread applicability in the treatment of various ACC minerals. Its disadvantages are the emission of exhaust gas and the high treatment costs associated with it. The wet arsenic removal method boasts advantages including minimal air pollution and a high resource recovery rate, significantly aiding in Cu concentrate recovery; its major drawback is the production of As-containing wastewater. The hydrometallurgical removal of As from ACC mines involves extracting As through leaching. Recently, biometallurgy has presented innovative solutions using specialized microorganisms to bioleach or bioabsorb As, but large-scale industrial applications still lack specific practical implementation. This review explores the underlying causes of the challenges encountered in processing ACC minerals. Additionally, it highlights pyrometallurgical roasting coupled with high-temperature filtration as a pivotal advancement in the extraction and processing of ACC ores.

5 December 2023 in Chemengineering
Verified
Journal Article
Open access
PDF file
XTXiaowei Tang
Xiaowei Tang
KJKunyu Ju
Kunyu Ju
Various methods, such as electrochemical purification, chemical precipitation, solvent extraction, and ion-exchange resins, have been extensively employed for the removal of copper from nickel anolytes. However, these methods exhibit several significant drawbacks when applied in industrial settings. For instance, electrochemical purification fails to efficiently manage nickel anolyte solutions with low copper content. Chemical precipitation presents challenges in residue management and incurs high production costs for precipitants. Solvent extraction raises concerns related to toxicity, while the use of ion-exchange resins demands meticulous selection of suitable materials. In this review, we present a comprehensive review of the nickel removal methods used for nickel anolyte purification, electrochemical purification, chemical precipitation, solvent extraction, and ion-exchange resins. We also examine the suitability and benefits of each technique in industrial settings. The ion-exchange method has drawn significant attention due to its strong selectivity and small adsorption quantity. The ion-exchange separation process does not generate any slag, and the ion-exchange resin can be recycled and reused; this method has great potential in a wide range of applications.

12 August 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XTXiaowei Tang
Xiaowei Tang
YHYuehui He
Yuehui He
Effective arsenic removal is a challenge when smelting high-arsenic copper minerals (HACMs, As > 3.0 wt%). Current arsenic-removal methods for HACM smelting cannot effectively remove arsenic and do not satisfy environmental requirements. This study argues that two-stage filtration based on Fe-25Al porous material and oxygen-controlled roasting is an effective technique for HACM arsenic removal (As = 11.8 wt%). The use of two-stage filtration facilitated double interception: particles larger than 10 μm were mechanically intercepted by the pore channels, and submicron particles (0.1–10 μm) were intercepted by the filter cake. Specifically, in the second stage, the flue gas underwent gradient rapid cooling, and the arsenic in the flue gas rapidly condensed, resulting in efficient arsenic removal. The purity of the condensed product, As2O3, was greater than 99%. Moreover, adding sand to the roasted mineral increased the specific surface area from 0.484 m2/g to 0.590 m2/g, reducing the “bottleneck effect” of pores; the addition of carbon further increased the surface area to 2.457 m2/g, inhibiting the formation of arsenate. When the mineral feed rate increased from 50 kg/h to 80 kg/h, the oxygen partial pressure decreased; this effectively inhibited the formation of iron arsenate, and the arsenic removal efficiency increased from 70.20% to 95.61%. The optimized process achieved ≥94% arsenic removal efficiency and ≥76% sulfur-fixation efficiency, with low energy cost. Material balance analysis showed that after arsenic removal, the Cu/Si to Fe/Si ratio of the copper mineral reached 1.5, which is appropriate for immediate subsequent smelting. This study provides a new technological strategy for HACM arsenic removal.