STEVEN FAIRCHILD

STEVEN FAIRCHILD


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 March 2019 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
SFSTEVEN FAIRCHILD
STEVEN FAIRCHILD
PZPeng Zhang
Peng Zhang
JPJeongho Park
Jeongho Park
TBTyson C. Back
Tyson C. Back
DMDaniel Marincel
Daniel Marincel
MPMatteo Pasquali
Matteo Pasquali
Field emission cathodes made from single bulk carbon nanotube (CNT) fibers have demonstrated high emission currents and long lifetimes. This paper investigates the goal of achieving even higher current levels from field emission array (FEA) cathodes comprised of multiple CNT fibers arranged in various array configurations. Arrays were fabricated with 25-μm-diameter CNT fibers in 2-fiber (1 x 2), 4-fiber (2 x 2), and 25-fiber (5 x 5) configurations, and their field emission properties were measured. The 1 x 2 and 2 x 2 FEA cathodes achieved the maximum current values that scaled to greater than 2 mA per emitter. The 5 x 5 FEA cathode achieved a high maximum current value of 22 mA and exhibited stable emission for 10 h at ~ 9 mA at an applied field strength of 0.11 V/μm. The Fowler-Nordheim theory was used to calculate the effective field enhancement factor (βeff) values for all of the arrays. Electrostatic simulations were performed using COMSOL Multiphysics modeling software to model the field enhancement of a perfectly uniform 5 x 5 array. The βeff value for the total array was compared to the individual β values at the fiber tips predicted by a surface potential model that predicted the field amplification of all 25 CNT fibers in the array.

19 July 2018 in Applied Sciences
Verified
Journal Article
Open access
PDF file
PZPeng Zhang
Peng Zhang
JPJeongho Park
Jeongho Park
SFSTEVEN FAIRCHILD
STEVEN FAIRCHILD
NLNathaniel P. Lockwood
Nathaniel P. Lockwood
YLYue Ying Lau
Yue Ying Lau
TBTyson Back
Tyson Back
Carbon nanotube (CNT) fiber-based emitters have shown great potential to deliver stable, high current beams for various potential applications. Because of joule heating, CNT field emitters are heated to high temperatures during field emission. It is important to improve the thermal management of emitters to increase their reliability and prevent premature failure. This paper compares the field emission characteristics and the temperature distribution of a new configuration of a looped CNT fiber emitter with a traditional single vertical CNT fiber emitter. It is found that the maximum temperature of the looped fiber emitter (~300 °C) is significantly reduced compared to that of the vertical fiber (~600 °C) at the same emission current of 3 mA. The experimentally measured temperature distribution is compared with a recent theory on joule heating of a one-dimensional conductor. This study provides new insights into the design of high performance field emitters.

30 January 2017 in Journal of Materials Science
Verified
Journal Article
Closed access
PDF file
MBM.-H. Berger
M.-H. Berger
TBT. C. Back
T. C. Back
PSPatrick Soukiassian
Patrick Soukiassian
DMD. Martinotti
D. Martinotti
LDL. Douillard
L. Douillard
ASA. Sayir
A. Sayir

24 March 2021 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
SFSTEVEN FAIRCHILD
STEVEN FAIRCHILD
TAThiago A. de Assis
Thiago A. de Assis
JPJ. H. Park
J. H. Park
MCMarc M. Cahay
Marc M. Cahay
JBJ. Bulmer
J. Bulmer
MPM. Pasquali
M. Pasquali
The field electron emission properties of carbon nanotube (CNT) films composed of densely packed and highly aligned CNTs were investigated. The CNT films were produced by a continuous film casting process and are spooled into long lengths with the CNTs aligned lengthwise in the film. The anisotropic nature of the CNT film morphology was confirmed by performing specific conductivity measurements in directions both parallel and perpendicular to the aligned CNT microstructure. Field emission experiments were performed on 5 and 10 mm wide films that were mechanically cut into small samples and then vertically mounted so that the emission occurred from the film edge. The films were mounted with the aligned CNT microstructure oriented either parallel or perpendicular to the direction of the applied electric field. The highest emission currents were produced by films mounted in the parallel alignment configuration. Additional experiments were performed on films that were folded, which eliminated surface irregularities at the film edge due to the cutting process. SEM imaging performed at the ridge of the folded film before and after field emission (FE) experiments showed that films mounted in the parallel alignment configuration had minimal surface damage after FE, while films mounted in the perpendicular alignment configuration showed substantial damage. The effective emission area and field enhancement factor were extracted from the FE data using the orthodox Fowler–Nordheim theory. Folded CNT film cathodes mounted in the parallel alignment configuration produced the highest emission currents, while demonstrating a larger emission area and lower field enhancement factor.

1 March 2023 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
SFSTEVEN FAIRCHILD
STEVEN FAIRCHILD
CAChelsea E. Amanatides
Chelsea E. Amanatides
TAThiago A. de Assis
Thiago A. de Assis
PMPaul T. Murray
Paul T. Murray
DTDmitri Tsentalovich
Dmitri Tsentalovich
JBJohn J. Boeckl
John J. Boeckl
Field electron emission cathodes were constructed from knitted fabrics comprised entirely of carbon nanotube (CNT) fibers. The fabrics consisted of a top layer array of ∼2 mm high looped structures and a bottom layer that was 1 mm thick with a flat underlying surface. Field emission (FE) experiments were performed on 25.4 mm diameter CNT fabric cathodes in both direct current (DC) and pulsed voltage (PV) modes, and the results were compared to those obtained from a CNT film cathode. The DC measurements were performed at a maximum voltage of 1.5 kV. The CNT fabric cathode emitted 20 mA, which was an 8× increase over the emission current from the CNT film cathode. The DC results were analyzed using the corrected form of the Fowler–Nordheim FE theory initially developed by Murphy and Good, which allows for the determination of the formal emission area and effective gap-field enhancement factor. The PV experiments resulted in Ampere level emission currents from both CNT fabric and CNT film cathodes. For a 25 kV, 500 ns voltage pulse, the CNT fabric cathode emitted 4 A, which was 2× more current than the CNT film cathode. Scanning electron microscopy imaging after PV testing revealed that the fibers remained intact after >5000 pulses. These results indicate that knitted CNT fabrics offer a promising approach for developing large area, conformable, robust FE cathodes for vacuum electronic devices.

19 October 2020
Verified
Conference Paper
Closed access
SFSTEVEN FAIRCHILD
STEVEN FAIRCHILD
PMPaul T. Murray
Paul T. Murray
SPSalvador Portillo
Salvador Portillo
GDGenevieve Dion
Genevieve Dion
Carbon Nanotube (CNT) fibers and films have demonstrated excellent field emission (FE) properties and thus hold significant potential for use as electron sources for vacuum electronic devices VEDs). FE cathodes made from 100μm diameter CNT fibers were fabricated on an industrial grade 3D knitting machine. A 1” diameter cathode was tested using 30kV, 30A power supply with a 300ns pulse width. An applied field strength of 3V/μm produced a measured current level of approximately 15A. A CNT film cathode was fabricated from a 20mm wide film arranged in a corrugated geometry. This cathode was tested in a low impedance linear transformer driver (LTD) system operating at 30kV with a 200ns pulse width. The measured current level was approximately 2kA for an applied field strength of 6V/μm.