25 October 2013 in Advanced Functional Materials
21 March 2015 in Journal of the American Ceramic Society
11 February 2019 in Chemistry of Materials
7 June 2022 in Nature Communications
AYAsia Matatyaho Ya’aKobi
AMAshleigh D. Smith McWilliams
Ashleigh D. Smith McWilliams
+10
Boron nitride nanotubes (BNNTs) have attracted attention for their predicted extraordinary properties; yet, challenges in synthesis and processing have stifled progress on macroscopic materials. Recent advances have led to the production of highly pure BNNTs. Here we report that neat BNNTs dissolve in chlorosulfonic acid (CSA) and form birefringent liquid crystal domains at concentrations above 170 ppmw. These tactoidal domains merge into millimeter-sized regions upon light sonication in capillaries. Cryogenic electron microscopy directly shows nematic alignment of BNNTs in solution. BNNT liquid crystals can be processed into aligned films and extruded into neat BNNT fibers. This study of nematic liquid crystals of BNNTs demonstrates their ability to form macroscopic materials to be used in high-performance applications.
5 March 2019 in IEEE Transactions on Plasma Science
Field emission cathodes made from single bulk carbon nanotube (CNT) fibers have demonstrated high emission currents and long lifetimes. This paper investigates the goal of achieving even higher current levels from field emission array (FEA) cathodes comprised of multiple CNT fibers arranged in various array configurations. Arrays were fabricated with 25-μm-diameter CNT fibers in 2-fiber (1 x 2), 4-fiber (2 x 2), and 25-fiber (5 x 5) configurations, and their field emission properties were measured. The 1 x 2 and 2 x 2 FEA cathodes achieved the maximum current values that scaled to greater than 2 mA per emitter. The 5 x 5 FEA cathode achieved a high maximum current value of 22 mA and exhibited stable emission for 10 h at ~ 9 mA at an applied field strength of 0.11 V/μm. The Fowler-Nordheim theory was used to calculate the effective field enhancement factor (βeff) values for all of the arrays. Electrostatic simulations were performed using COMSOL Multiphysics modeling software to model the field enhancement of a perfectly uniform 5 x 5 array. The βeff value for the total array was compared to the individual β values at the fiber tips predicted by a surface potential model that predicted the field amplification of all 25 CNT fibers in the array.
1 November 2013 in Physical Review B
In recent years, there has been an increased interest in octahedral rotations in perovskite materials, particularly on their response to strain in epitaxial thin films. The current theoretical framework assumes that rotations are affected primarily through the change in in-plane lattice parameters imposed by coherent heteroepitaxy on a substrate of different lattice constant. This model, which permits prediction of the thin-film rotational pattern using first-principles density functional theory, has not been tested quantitatively over a range of strain states. To assess the validity of this picture, coherent LaAlO thin films were grown on SrTiO, NdGaO, LaSrAlO, NdAlO, and YAlO substrates to achieve strain states ranging from 3.03 to 2.35. The out-of-plane and in-plane octahedral rotation angles were extracted from the intensity of superlattice reflections measured using synchrotron x-ray diffraction. Density functional calculations show that no measurable change in intrinsic defect concentration should occur throughout the range of accessible strain states. Thus, the measured rotation angles were compared with those calculated previously for defect-free films. [Hatt and Spaldin, Phys. Rev. B 82, 195402 (2010)]. Good agreement between theory and experiment was found, suggesting that the current framework correctly captures the appropriate physics in LaAlO.