The operation of fusion reactors is based on the reaction that occurs when two heavy hydrogen isotopes, deuterium and tritium, combine to form helium and a neutron with an energy of 14.1 MeV D + T → He + n. For this reaction to occur, it is necessary to produce tritium in the facility itself, as tritium is not common in nature. The generation of tritium in the facility is a key function of the breeder blanket. During the operation of a D–T fusion reactor, high-energy tritium is generated as a result of the 6Li(n,α)T reaction in a lithium-containing ceramic material in the breeder blanket. Lithium metatitanate Li2TiO3 is proposed as one of the promising materials for use in the solid breeder blanket of the DEMO reactor. Several concepts for test blanket modules based on lithium ceramics are being developed for testing at the ITER reactor. Lithium metatitanate Li2TiO3 has good tritium release parameters, as well as good thermal and thermomechanical characteristics. The most important property of lithium ceramics Li2TiO3 is its ability to withstand exposure to long-term high-energy radiation at high temperatures and across large temperature gradients. Its inherent thermal stability and chemical inertness are significant advantages in terms of safety concerns. This study was a continuation of research regarding tritium and helium release from lithium metatitanate Li2TiO3 with 96% 6Li during irradiation at the WWR-K research reactor using the vacuum extraction method. As a result of the analysis of experiments regarding the irradiation of lithium metatitanate in vacuum conditions, it has been established that, during irradiation, peak releases of helium from closed pores of the ceramics are observed, which open during the first 7 days of irradiation. The authors assumed that the reasons samples crack are temperature gradients over the ceramic sample, resulting from the internal heating of pebbles under the conditions of their vacuum evacuation, and contact with the bottom of the evacuated capsule. The temperature dependence of the effective diffusion coefficient of tritium in ceramics at the end of irradiation and the parameters of helium effusion were also determined.
Nowadays, radiation technologies are widely used in industry, medicine and other fields. One of the particular cases of application of such technologies is the irradiation-induced coloring of topaz. As a result of the application of this technology, colorless topaz acquires a more noble, respectively, economically advantageous color. For this, different types of radiation can be used. In the case of irradiation-induced coloring of topaz using neutrons, it is necessary to formation optimal conditions for irradiation of topaz. First of all, in the topaz irradiation zone it is necessary to formation a "hard" neutron spectrum not only for the formation of color centers, but also to reduce the residual radioactivity in the topaz. In this work, the possibility of implementing the technology of irradiation-induced coloring of topaz in the WWR-K research reactor was evaluated. For this, the energy distribution of neutrons in the central and peripheral irradiation positions of the WWR-K reactor was determined. On the basis of the obtained values, the time to reach the target neutron fluence (1018 cm-2) was estimated. The influence of the ratio of the flux of fast to thermal neutrons on the activation of natural impurities in topaz is shown. The results of trial irradiation of topazes in the WWR-K reactor without formation special conditions are presented. Ways to optimize the conditions for irradiation of topazes in the WWR-K reactor in order to improve the economic efficiency of the work were proposed. В настоящее время радиационные технологии очень широко применяются в промышленности, в медицине и других сферах. Одним из частных случаев применения таких технологий является радиационное окрашивание полудрагоценных топазов. В результате применения указанной технологии бесцветные топазы приобретают более благородный цвет, что является выгодным с экономической точки зрения. Для этого можно применять разные виды радиационного излучения. В случае радиационного окрашивания топазов с использованием нейтронов необходимо создать оптимальные условия для их облучения. В зоне облучения топазов необходимо создать «жесткий» спектр нейтронов. Это необходимо не только для формирования центров окраски, но и для снижения остаточной радиоактивности в них. В данной работе оценивалась возможность реализации технологии радиационного окрашивания топазов в исследовательском реакторе ВВР-К Института ядерной физики Республики Казахстан. Для этого было определено энергетическое распределение нейтронов в центральных и периферийных облучательных позициях реактора ВВР-К. На основе этих данных была произведена оценка времени, необходимого для достижения целевого флюенса нейтронов (1018 см-2). Показано влияние плотности потока тепловых нейтронов на активацию природных примесей в топазах. Приведены результаты пробного облучения топазов в штатном облучательном канале в реакторе ВВР-К. Предложены пути оптимизации условий облучения топазов в реакторе ВВР-К с целью улучшения экономической эффективности работ. Қазіргі таңда радиациялық технологиялар өнеркәсіп пен медицинада және басқа да салаларда өте кеңінен қолданылуда. Жартылай асыл топаздарды радиация арқылы түсін өзгерту осындай технологияларды пайдаланудың жеке бір көрінісі болып табылады. Аталған технологияны қолдану нәтижесінде түссіз топаздар асыл түске енеді, ол экономикалық көз қарастан тиімді болып табылады. Ол үшін әртүрлі радиациялық сәулелерді қолдануға болады. Топаздардың радиация арқылы түсін өзгертуге нейтрондарды пайдаланған жағдайда, оларды сәулелендіру үшін оңтайлы шарттар жасау керек. Топаздарды сәулелендіру аймағында «қатты» спектр болуы керек. Ол түс өзгерту орталықтарын қалыптастыруға ғана емес, сондай-ақ олардағы қалдықты радиобелсенділікті төмендету үшін де қажет. Аталған жұмыста Қазақстан Республикасы Ядролық физика институтының ССР-Қ зерттеу реакторында топаздарды радиация арқылы түсін өзгерту технологиясын іске...