This paper investigates the steady, two dimensional, and magnetohydrodynamic flow of copper and alumina/water hybrid nanofluid on a permeable exponentially shrinking surface in the presence of Joule heating, velocity slip, and thermal slip parameters. Adopting the model of Tiwari and Das, the mathematical formulation of governing partial differential equations was constructed, which was then transformed into the equivalent system of non-linear ordinary differential equations by employing exponential similarity transformation variables. The resultant system was solved numerically using the BVP4C solver in the MATLAB software. For validation purposes, the obtained numerical results were compared graphically with those in previous studies, and found to be in good agreement, as the critical points are the same up to three decimal points. Based on the numerical results, it was revealed that dual solutions exist within specific ranges of the suction and magnetic parameters. Stability analysis was performed on both solutions in order to determine which solution(s) is/are stable. The analysis indicated that only the first solution is stable. Furthermore, it was also found that the temperature increases in both solutions when the magnetic parameter and Eckert number are increased, while it reduces as the thermal slip parameter rises. Furthermore, the coefficient of skin friction and the heat transfer rate increase for the first solution when the magnetic and the suction parameters are increased. Meanwhile, no change is noticed in the boundary layer separation for the various values of the Eckert number in the heat transfer rate.
In this analysis, we aim to examine the heat transfer and flow characteristics of a copper-aluminum/water hybrid nanofluid in the presence of viscous dissipation, magnetohydrodynamic (MHD), and porous medium effect over the shrinking sheet. The governing equations of the fluid model have been acquired by employment of the model of Tiwari and Das, with additional properties of the hybrid nanofluid. The system of partial differential equations (PDEs) has been converted into ordinary differential equations (ODEs) by adopting the exponential similarity transformation. Similarity transformation is an essential class of phenomenon where the symmetry of the scale helps to reduce the number of independent variables. Note that ODE solutions demonstrate the PDEs symmetrical behavior for the velocity and temperature profiles. With BVP4C solver in the MATLAB program, the system of resulting equations has been solved. We have compared the present results with the published results and found in excellent agreements. The findings of the analysis are also displayed and discussed in depth graphically and numerically. It is discovered that two solutions occur in definite ranges of suction and magnetic parameters. Dual (no) similarity solutions can be found in the range of (). By performing stability analysis, the smallest values of eigenvalue are obtained, suggesting that a stable solution is the first one. Furthermore, the graph of the smallest eigenvalue shows symmetrical behavior. By enhancing the Eckert number values the temperature of the fluid is raised.
The purpose of the present paper is to investigate the micropolar nanofluid flow on permeable stretching and shrinking surfaces with the velocity, thermal and concentration slip effects. Furthermore, the thermal radiation effect has also been considered. Boundary layer momentum, angular velocity, heat and mass transfer equations are converted to non-linear ordinary differential equations (ODEs). Then, the obtained ODEs are solved by applying the shooting method and in the results, the dual solutions are obtained in the certain ranges of pertinent parameters in both cases of shrinking and stretching surfaces. Due to the presence of the dual solutions, stability analysis is done and it was found that the first solution is stable and physically feasible. The results are also compared with previously published literature and found to be in excellent agreement. Moreover, the obtained results reveal the angular velocity increases in the first solution when the value of micropolar parameter increases. The velocity of nanofluid flow decreases in the first solution as the velocity slip parameter increases, whereas the temperature profiles increase in both solutions when thermal radiation, Brownian motion and the thermophoresis parameters are increased. Concentration profile increases by increasing and decreases by increasing .
A mathematical analysis is performed to study the flow and heat transfer phenomena of Casson based nanofluid with effects of the porosity parameter and viscous dissipation over the exponentially permeable stretching and shrinking surface. The considered nanofluid comprises Casson as a base fluid that contains silver ( A g ) and copper ( C u ) solid nanoparticles. The system of the nonlinear governing partial differential equations (PDEs) are converted into ordinary differential equations (ODEs) by applying similarity transformation. The obtained ODEs are solved by using shooting technique in Maple software. Numerically obtained results reveal dual solutions for various values of pertinent parameters. Due to occurrence of dual solutions, the stability analysis is done in order to find stable solution. Positive signs of smallest eigenvalues point out that the first solution is stable and second unstable. The variation of the velocity and the temperature profiles with coefficient of the skin friction and the Nusselt number are shown graphically. Both temperature profiles and its boundary layer thicknesses increase as volume fraction of nanoparticles of A g and C u are increased in the Casson fluid. Velocity profiles and corresponding boundary layer thicknesses decrease by suspension of nanoparticles of silver and copper, whereas the silver A g nanoparticles show the greater rate of heat transfer enhancement as compared to copper C u nanoparticles when suspended in Casson fluid.