Long-term trends in sunshine duration in Chinese cities have been closely linked to factors caused by air pollution. To understand this impact on sunshine duration (SD), surface solar radiation from 1981 to 2020, annual PM2.5 concentration from 2012 to 2020 and air pollution index (API) data from 2013 to 2020 collected in ten representative cities in China were investigated, and the long-term relationship of SD with diffuse fraction (DF), aerosol option depth (AOD), annual PM2.5 concentration and API were analyzed. The results indicated that trends in SD varied across cities. SD decreased in seven of the ten selected cities’ stations in the past 40 years, and the annual mean SD decreased from −0.03 h d−1 per decade to −0.36 h d−1 per decade—particularly in the Beijing North China Plain, Shanghai and Wuhan stations in the Yangtze River delta, where the trend coefficients were lower than −0.5. Conversely, increases in varying degrees of SD were found in Kunming (0.38 h d−1 per decade), Guangzhou and Shenyang in Southwest, South and Northeast China, respectively—with the biggest trend coefficient of 0.54 in Kunming. In addition to the SD variation, the DF in the ten city stations increased continuously from 1981 to 2010 and then declined after 2010, which is closely related to decreases in the annual PM2.5 concentration after 2012. The correlation coefficients between DF and SD ranged from −0.04 to −0.62, validating their negative relationship and the slight increasing trend in SD in recent ten years. The annual averages for SD and the DF plateaued in the 2010s due to the stringent pollution controls established by the Chinese government after 2010. Furthermore, the correlation coefficients between SD and the API ranged from −0.12 to −0.58, demonstrating a negative relationship between SD and the API.
Aiming at the method of indoor calibration of a transmission visibility meter has not been established; a new calibration method by measuring the luminous transmittance of attenuator piece was established. Based on the high homogeneity stability lighting and the multi‐spectral transmittance analysis technique, a calibration system of the transmission visibility meter by measuring the luminous transmittance of the attenuator piece was designed. The experiment was designed by measuring the luminous transmittance with the range of 0.2–99.2% of a series of calibrated attenuators and the visibility in the range of 40 m to 20 km, then the luminous transmittance errors, the meteorological optical range (MOR) errors and their uncertainty were obtained. The result showed that the luminous transmission error was within ±0.18%, which satisfied the calibration requirement for transmission visibility meter transmittance; the MOR calibration error met the accuracy requirements of the International Civil Aviation Organisation for visibility measurement; this work will have guiding significance in establishing a calibration procedure for the transmission visibility meter.
In this paper, we present a method based on the conjugate image principle and micro-nano optics to detect tilt aberrations of a phased fiber laser array system. A co-aperture optics system was adapted to detect the tilt aberrations of a seven-element phased fiber laser array system simultaneously. A Kepler telescope was designed to construct the conjugate relation between the exit pupil of a fiber optic laser array system and a microlens array and also to match the size of the seven beams and the microlens array. The apochromatic theory was used to meet the multispectral (1064 ± 0.3 nm, 1030 ± 0.3 nm, and 633 ± 0.2 nm) detection needs. A far-field detection unit was also designed to evaluate beam quality. When the actual beam was offset by 1 pixel, the beam tilt was about 0.7 µrad. The maximum detection error of the seven-element system was about 7 µrad. It could not only directly detect the beam’s tilt angle but also maintained detection accuracy while reducing the algorithm complexity.