In long-range laser communication, adaptive optics tracking systems are often used to achieve high-precision tracking. When recognizing beacon spots for tracking, the traditional threshold segmentation method is highly susceptible to segmentation errors in the face of interference. In this study, an improved DeepLabV3+ network is designed for fast and accurate capture of beacon spots in complex situations. In order to speed up the inference process, the backbone of the model was rewritten as MobileNetV2. This study improves the ASPP (Atrous Spatial Pyramid Pooling) module by splicing and fusing the outputs and inputs of its different layers. Meanwhile, the original convolution in the module is rewritten as a depthwise separable convolution with a dilation rate to reduce the computational burden. CBAM (Convolutional Block Attention Module) is applied, and the focus loss function is introduced during training. The network yields an accuracy of 98.76% mean intersection over union on self-constructed beacon spot dataset, and the segmentation consumes only 12 milliseconds, which realizes the fast and high-precision capturing of beacon spots.
Adaptive optics (AO) can effectively improve the beam quality of solid-state slab lasers. However, the aperture of the output beam increases as the output power of the laser increases, resulting in a larger measurement system. Ultimately, a more complex AO system needs to be designed. To meet the requirements of conjugate imaging in an AO system, it is of research significance to coordinate and optimize the system's structural dimensional parameters while enabling the detection of multiple parameters, such as the wave-front and beam quality. In this paper, a multiparameter measurement technique in a large-aperture rectangular laser beam aberration-correction system is proposed. The system layout is optimized with total dimensions of 400 mm × 150 mm × 246 mm (L × W × H). The AO system conforms to the requirements for conjugate detection and can perform wave-front detection, far-field evaluation, and near-field detection of a 160 mm × 120 mm rectangular beam produced from a solid-state slab laser. The findings reveal that the measured PV values of wave-fronts of the measurement system are less than 0.288 μm, the RMS is no more than 0.079 μm, the average far-field beam quality factor is 1.248 times the diffraction limit, and the average near-field beam uniformity is 0.533 at a temperature of 20°C ± 10°C; these results satisfy the technical parameters.
In this paper, we present a method based on the conjugate image principle and micro-nano optics to detect tilt aberrations of a phased fiber laser array system. A co-aperture optics system was adapted to detect the tilt aberrations of a seven-element phased fiber laser array system simultaneously. A Kepler telescope was designed to construct the conjugate relation between the exit pupil of a fiber optic laser array system and a microlens array and also to match the size of the seven beams and the microlens array. The apochromatic theory was used to meet the multispectral (1064 ± 0.3 nm, 1030 ± 0.3 nm, and 633 ± 0.2 nm) detection needs. A far-field detection unit was also designed to evaluate beam quality. When the actual beam was offset by 1 pixel, the beam tilt was about 0.7 µrad. The maximum detection error of the seven-element system was about 7 µrad. It could not only directly detect the beam’s tilt angle but also maintained detection accuracy while reducing the algorithm complexity.