The present study is to compare the multiple regression analysis (MRA) model and artificial neural network (ANN) model designed to predict the mechanical strength of fiber-reinforced concrete on 28 days. The model uses the data from early literatures; the data consist of tensile strength of fiber, percentage of fiber, water/cement ratio, cross-sectional area of test specimen, Young’s modulus of fiber, and mechanical strength of control specimen, and these were used as the input parameters; the respective strength attained was used as the target parameter. The models are created and are used to predict compressive, split tensile, and flexural strength of fiber admixed concrete. These models are evaluated through the statistical test such as coefficient of determination (R2) and root mean squared error (RMSE). The results show that these parameters produce a valid model through both MRA and ANN, and this model gives more precise prediction for the fiber admixed concrete.
1 January 2014 in Advances in Materials Science and Engineering
This paper deals with the setting time and pozzolanic activity of cement when ultra fine natural steatite powder (UFNSP) is used as replacement for cement. Initial setting time, final setting time, and mortar cube strength were studied, due to the replacement of ultra fine natural steatite powder with cement at 5%, 10%, 15%, 20%, and 25% by mass of cement. The setting time of fresh cement-binder paste and compressive strength of mortar cubes are observed. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were applied to investigate the microstructural behaviour and chemical element distribution inside cement-binder matrix. Results indicate that the length of dormant period is shortened. The replacement of ultra fine natural steatite powder with cement reduces initial setting time, and final setting time and increases mortar cube compressive strength.
2 August 2017 in Advances in Materials Science and Engineering
An experimental investigation was made on flow properties and compressive strength of self-compacting concrete (SCC) with ultrafine natural steatite powder (UFNSP) as replacement to cement. The tests were conducted on specimens with 5%, 10%, 15%, 20%, and 25% of replacement of UFNSP to the weight of cement and compared to the control specimens. The flow properties of all specimens were tested and checked for their limit with the existing guidelines. The compressive strength test was done on all specimens for strength of 7 days, 14 days, 28 days, and 56 days. The hardened samples were tested for their microstructural behavior and the elements Mg, Ca, and Si were mapped. Through mapping, the formations of M-S-H along with C-S-H are observed. The results show that the addition of UFNSP influences the flow property, by reducing the flow, and increases the compressive strength till 20% replacement. Further the addition of UFNSP increases the denseness of microstructure of the specimens thus resulting in the strength increment.
Buildings expand and contract in response to their environment, which results in cracks in the structure. This can pose a serious threat to the people who use it, and these movements are frequently too small to be observed, and thus go unnoticed. Cracks can be caused by a variety of factors, including defects in the construction process, ground movement, foundation failure, and decay of the building fabric. If a structure is unable to accommodate this movement, cracking is likely to occur, posing a serious risk to the building's structural integrity. Only after cracks are identified can they be treated, and existing manual methods of sketching the crack patterns are highly subjective to the person performing the analysis, are frequently constrained by high costs, equipment and tool availability, and are extremely time consuming. In this paper, 40,000 images divided into two and categorized into positive and negative cracks are used as input and the presence of cracks is detected using a deep learning technique. The following crack types are included in the experimentation: hairline, stepped, vertical, and horizontal. In comparison to conventional image processing and other deep learning-based techniques, the proposed Convolutional Neural Network (CNN) achieves significantly higher accuracy than the Recurrent Neural Network (RNN). This paper’s objective is to create a model which can detect the cracks through deep learning methodology, and this will be the innovative region in crack detection using neural net framework.
1 October 2023 in Journal of Wuhan University of Technology-Mater. Sci. Ed.