This work enunciates the effect of Multi-Walled Carbon Nanotubes (MWCNTs) as an addition to concrete subjected to normal environment and adverse environment. The MWCNTs are dispersed in water in the range of 0 to 0.25 % by weight of cement. The dispersed MWCNTs are added in concrete during its manufacturing process, and get cured for 28 days. Then portion of the samples are tested for its compressive strength, further samples are placed in exposed conditions, such as 5% concentrated sodium chloride solution and 5% concentrated sulphuric acid solution for a period of 4 weeks and 8 weeks respectively. The effect of this exposure is studied through changes in the weight density and compressive strength of the samples. All the exposed and unexposed samples were studied for its microstructural behavior through scanning electron microscopy. Ultimately, this work elucidates the influence of MWCNTs in the resistance of concrete under adverse environmental condition.
7 May 2025 in Journal of Building Pathology and Rehabilitation
Essential steel components with variable cross-section are fabricated from welded plates, which are primarily employed for the growth of the construction industry in beams according to the stress and stiffness requirements of the structure. Lateral-torsional buckling, in which the beam experiences non-uniform twisting and buckling about its weaker axis, is one of the most common failure modes. This dissertation focuses primarily on the lateral-torsional buckle of non-prismatic I-beams. The development of differential equations for deformation analysis of the non-prismatic beam. ANSYS results and deformation equation results are compared to validate the methodology. Using ANSYS, the lateral torsional buckling of a non-prismatic I-beam section with uniformly distributed load is analyzed. In finite element analyses, the solid element approach is used to determine the lateral buckling load for various cross-sections (β = 0.1 to 1.0) by analyzing their behavior. In addition, a stiffener is used to prevent lateral buckling, and the results are compared to a model without stiffeners.