Analysis of the structural vibration, under the sound excitation is an important part of the quality assurance during the design process of devices. One of the most commonly used method is Laser Doppler Vibrometry (LDV). However, under the rapid fluctuations of temperature, structural resonances are shifted into the other frequencies. In such situation LDV method may be inconvenient, due to the scanning time. In this paper the authors proposed Chladni figures to modal analysis of the double-panel structure, excited by the loudspeaker enclosed inside the casing with a rigid frame. Double-panel structure has been proven to be particularly useful for noise and vibration reduction applications. Vision images, obtained during the experiments are converted to binary patterns, using GLCM matrix, and compared with simulations performed in ANSYS.
Electric appliances used in workplaces and everyday life often generate a low-frequency noise, which affects human body systems. Passive methods employed to reduce noise are not effective at low frequencies. The classical approach to active noise control practically involves the generation of local zones of quiet, whereas at other areas the noise is reinforced. Moreover, it usually requires a large number of secondary sound sources. Hence, an active casing approach has been developed. The active casing panels’ vibrations are controlled to reduce the device noise emission. Efficiency of this method has been previously confirmed by the authors and the results have been reported in multiple journal publications. However, in the previous research experiments, the active casing was placed at a distance from the enclosure walls. In this research, the active casing is located in a corner and such placement is intentionally used to facilitate the active control system’s operation. The noise reduction performance is investigated at multiple configurations, including a range of distances from the corner and different error microphone arrangements. The analysis of both primary and secondary paths is given. Advantages and drawbacks of different active casing configurations are presented and discussed.