The study of dredged fill in Guangdong (GD), China, is of great significance for reclamation projects. Currently, there are relatively few studies on dredged fill in Guangdong, and there are many differences in the engineering characteristics of dredged fill foundations formed through land reclamation and natural foundations. In order to have a more comprehensive understanding of the physico-mechanical properties of blowing fill in the coastal area of GD and to understand the effect of its long-term creep row on the long-term settlement and deformation of buildings, the material properties, microstructure, elemental composition, triaxial shear properties, and triaxial creep properties of dredged fill in Guangdong were studied and analyzed through indoor geotechnical tests, scanning electron microscopy (SEM), X-ray diffraction (XRD), and conventional triaxial shear tests and triaxial creep tests. The test results showed that the Guangdong dredged fill is characterized by a high water content, high pore ratio, and high-liquid-limit clayey sand, and the mineral composition is dominated by quartz and whitmoreite. The scanning electron microscopy results showed that the particles of the dredged fill showed an agglomerated morphology, and the surface of the test soil samples had scaly fine flakes and a fragmented structure. In the triaxial shear test, the GD dredged fill showed strain hardening characteristics, and the effective stress path showed continuous loading characteristics; the consolidated undrained shear test showed that the GD dredged fill had shear expansion characteristics under low-perimeter-pressure conditions. It was found that, with an increase in bias stress, the axial strain in the consolidated undrained triaxial creep test under the same perimeter pressure conditions gradually exceeded the axial strain in the consolidated drained triaxial creep test. The results of this study are of theoretical and practical significance for further understanding the mechanical properties of silty soils in the region and for the rational selection of soil strength parameters in practical engineering design.

Deep-sea-resource development and marine engineering represent cutting-edge global research priorities. As a typical deep-sea region in the Western Pacific, the physical–mechanical properties of the South China Sea’s deep-sea sediments have critical implications for regional and global deep-sea engineering design and the safety assessments of resource exploitation. However, due to extreme environmental conditions and sampling technology limitations, studies on the mechanical behavior and microstructural control mechanisms of sediments in complex marine environments exceeding 2000 m in depth remain insufficient worldwide, hindering precise engineering design and risk management. This study systematically investigates the physical–mechanical properties, microstructure, and mechanical behavior of intact sediments acquired at a depth of 2060 m in the South China Sea. Through physical property tests, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), one-dimensional consolidation, and triaxial shear tests, combined with comparisons with nearshore soft soils and other deep-sea sediments, we acquired the following results: The sediments primarily consist of muscovite, quartz, and calcite. Triaxial shear tests revealed initial dilation followed by shear consolidation, reaching critical conditions with an effective cohesion of 19.58 kPa and an effective internal friction angle of 27.32°. One-dimensional consolidation tests indicated a short principal consolidation time, wherein the consolidation coefficient first decreased under loading before slowly increasing, while the secondary consolidation coefficient stabilized after vertical pressure exceeded 400 kPa. The research results not only provide a direct reference for designing deep-sea engineering projects in the South China Sea, calculating the penetration resistance of deep-sea drilling rigs, and predicting the foundation settlement of offshore wind power but also furnish typical cases and key data support for the study of the mechanical properties of global deep-sea high-organic-matter sediments and engineering applications.