Brake-by-wire (BBW) system is a basic and significant component for intelligent vehicles and electric vehicles. During autonomous emergency braking process, the dynamic response requirement of the BBW actuator motor is very high. Hence, a dynamic decoupling control method is proposed for permanent magnet synchronous motor (PMSM) of BBW system to improve the dynamic response performance. First, a PMSM dynamic model and a thermodynamic model of stator winding are built. Then, the inductance and flux linkage parameters are identified based on recursive least squares and the back electromotive force formula, and an accurate relationship between inductance and flux linkage parameters and motor temperature is obtained. Finally, a dynamic decoupling control method based on the intensive binary dichotomy table method is designed. The results both of simulations and experiments show that the proposed method shorten the boost time by 18.30%, thereby reducing the braking time by 9.63%.
10 March 2021 in IEEE Transactions on Transportation Electrification
Brake-by-wire (BBW) system is an important safe component of intelligent vehicles. The fast and stable current control of permanent magnet synchronous motor (PMSM) is a key factor that ensures the dynamic response performance of BBW. Hence, a fusion predictive control (FPC) method based on uncertain algorithm is proposed, which solves the parameter sensitivity problem in traditional deadbeat current control of PMSM. It contains a fusion predictive controller, a flux observer, and an uncertain controller. The FPC integrates forward linear prediction (FLP) and deadbeat prediction (DP) to improve the current response speed. Considering the model parameter mismatch of the controller, the uncertain controller can adjust the reliability of FLP and DP in the FPC in real time through the uncertainty measurement. On the basis of the whole system, a flux observer is designed, which can dynamically adjust the parameters of flux to satisfy the current loop. Both simulation and experimental results show that this method reduces the sensitivity of system parameters and improves the dynamic performance of the current loop (up to 12.56%).
Redundant braking system (RBS) is an important part of intelligent vehicle safety. Accurate and stable steering wheel angle is the key signal to realize vehicle stability control. Hence, in order to improve the reliability of the angle signal in the redundant braking system, a redundant steering wheel angle sensor (RSAS) is developed and designed, and a fault diagnosis and fault tolerance degradation control (FDFTDC) strategy based on fuzzy decision is proposed in combination with the steering system. The RSAS consists of a main gear connected to the steering wheel column, and the two pinion pairs are redundant to each other. Based on RSAS, a steering wheel observer is introduced to establish steering wheel Angle fault diagnosis and fault-tolerant control strategy. Finally, it is applied to the stability of the braking system. The results show that FDFDTC can effectively diagnose and control the steering wheel Angle signal, improve the safety redundancy of the system, and effectively improve the robustness of the RBS in the vehicle stability. When one of the RSAS fails, the MSE is 0.0616, with the same deviation as normal. In the RBS system, when all RSAS fail, the MSE is 0.0867, which can still guarantee the function of the system.
11 October 2024 in IEEE Transactions on Intelligent Vehicles
With the development of automotive intelligence, drive-by-wire system has attracted extensive attention from academia and industry. However, the architectural design of electro-mechanical-brake (EMB) systems has not been emphasized enough, especially in the context of functional safety concept. In view of this, based on ISO 26262, this paper extends the system boundary of functional safety for the first time, and combines EMB system with other systems of the vehicle to build a 4-way redundant EMB system architecture. Furthermore, detailed qualitative and quantitative analysis results are given by using state transition location diagram and quantitative fault tree analysis (FTA) respectively, and the braking failure rate is Q 0 ≈ 2.0003×10 -10 < 10 -8 meets the failure rate requirements of ASIL-D, which prove the security and reliability of the proposed architecture. This paper provides guidance and reference for the design and analysis of EMB system for subsequent researchers, and guarantees the safe development of autonomous vehicles from the safety and reliability of the system.
3 November 2025 in IEEE Transactions on Transportation Electrification
Electromechanical braking (EMB) is an important braking system. It is necessary to maintain the effect of anti-lock-braking (ABS) on a low adhesion road surface. After multiple clamping releases, the motor parameters degenerate, resulting in EMB braking decline. Therefore, a PI adaptive control (PIAC) method based on threshold trigger parameter estimation (TTPE) is proposed for a permanent magnet synchronous motor (PMSM) in the EMB system. First, the dynamic model of PMSM is established, and the inertia of PMSM is identified offline by the acceleration and deceleration method (ADM). Then, a parameter recognition method based on threshold trigger (TT) is constructed, which mainly includes neural network recognition and neural network identification (NNI). Finally, based on the identified parameters, the PIAC is dynamically adjusted to realize the effective adjustment of EMB. Simulation and experimental results show that this method can effectively improve the robustness of motor control and solve the problem of deviation of control effect after EMB braking for a long time.
Electro-Mechanical Braking (EMB), as a novel brake-by-wire technology, is rapidly being implemented in vehicle chassis systems. Nevertheless, the integrated design of the EMB caliper contributes to an increased unsprung mass in Distributed Drive Electric Vehicles (DDEVs). Experimental results indicate that when the Anti-lock Braking System (ABS) is activated, these factors can induce high-frequency wheel oscillations. To address this issue, this study proposes an anti-oscillation control strategy tailored for EMB systems. Firstly, a quarter-vehicle model is established that incorporates the dynamics of the drive motor, suspension, and tire, enabling analysis of the system’s resonant behavior. The Discrete Fourier Transform (DFT) is applied to the difference between wheel speed and vehicle speed to extract the dominant frequency components. Then, an Adaptive Braking Intensity Field Regulation (ABIFR) strategy and a Model Predictive and Logic Control (MP-LC) framework are developed. These methods modulate the amplitude and frequency of braking torque reductions executed by the ABS to suppress high-frequency wheel oscillations, while ensuring sufficient braking force. Experimental validation using a real vehicle demonstrates that the proposed method increases the Mean Fully Developed Deceleration (MFDD) by 14.8% on low-adhesion surfaces and 15.2% on high-adhesion surfaces. Furthermore, the strategy significantly suppresses 12–13 Hz high-frequency oscillations, restoring normal ABS control cycles and enhancing both braking performance and ride comfort.