Electro-Mechanical Braking (EMB), as a novel brake-by-wire technology, is rapidly being implemented in vehicle chassis systems. Nevertheless, the integrated design of the EMB caliper contributes to an increased unsprung mass in Distributed Drive Electric Vehicles (DDEVs). Experimental results indicate that when the Anti-lock Braking System (ABS) is activated, these factors can induce high-frequency wheel oscillations. To address this issue, this study proposes an anti-oscillation control strategy tailored for EMB systems. Firstly, a quarter-vehicle model is established that incorporates the dynamics of the drive motor, suspension, and tire, enabling analysis of the system’s resonant behavior. The Discrete Fourier Transform (DFT) is applied to the difference between wheel speed and vehicle speed to extract the dominant frequency components. Then, an Adaptive Braking Intensity Field Regulation (ABIFR) strategy and a Model Predictive and Logic Control (MP-LC) framework are developed. These methods modulate the amplitude and frequency of braking torque reductions executed by the ABS to suppress high-frequency wheel oscillations, while ensuring sufficient braking force. Experimental validation using a real vehicle demonstrates that the proposed method increases the Mean Fully Developed Deceleration (MFDD) by 14.8% on low-adhesion surfaces and 15.2% on high-adhesion surfaces. Furthermore, the strategy significantly suppresses 12–13 Hz high-frequency oscillations, restoring normal ABS control cycles and enhancing both braking performance and ride comfort.
1 January 2026 in IEEE Transactions on Transportation Electrification
Distributed drive electric vehicles enable flexible yaw moment generation through independent wheel torque control, offering significant potential for maneuverability enhancement and stability regulation. However, differential torque based yaw assistance may lead to conflicts between low speed agility improvement and high speed lateral stability. To address this issue, a hierarchical maneuverability and stability control framework is proposed based on a hybrid residual compensated nonlinear model predictive control scheme. A yaw rate magnification strategy is adopted to enhance low speed maneuverability according to driver steering intent, while a stability region based triggering mechanism is developed to shift the control objective toward sideslip suppression when instability is detected. The nonlinear MPC is formulated based on a nominal two degree of freedom vehicle model and augmented by a temporal LSTM predictor to compensate for unmodeled dynamics. A multi constraint drive force allocation scheme is designed to coordinate longitudinal requirements, direct yaw moment generation, and tire friction limitations. Simulation and real vehicle experiments demonstrate that the proposed approach reduces turning radius at low speeds and enhances lateral stability under high speed and low adhesion conditions.